 | 3" x 1000' Stretch Film with 1 Handle, 80 Gauge (TNB303) Category: Pallet Wrap
Brand: Box Packing and Shipping Supplies Part Number: TNB303
Item #: TNB303. Narrow width stretch film bundles small, light-weight products for shipment. Faster and more economical to use than tape, strapping or twine. Stretch film clings to itself. No tape needed. Stretch film will not leave a residue on products. One plastic dispenser is included in each case. brCustomers also search for: Stretch Film, Stretch Wrap, Cast Film, Bundling Stretch Film | *$70.49 |
 | Solid Rubber Wheel for Hand Trucks, Carts- 3.5" Rim x 10" Diameter
Brand: BR
Recessed rim design requires just 2-1/4" axle hub, fits most hand appliance trucks, carts, wagons and garden equipment with 5/8" axle. One-piece steel rim with corrosion resistant powder coat finish. | *$8.49 |
 | Braber Equipment General-Purpose PTO Shaft Assembly - 54in.-56in. Collapsed Length, Model# 69.777.456
Brand: Braber Equipment
Complete driveline is economical and easy to install, so you don't have to spend time trying to repair damaged or worn shafts. Can be cut to desired length to meet your driveline needs. Meets all ASAE standards. | *$119.99 |
 | Braber Equipment General-Purpose PTO Shaft Assembly - 32in. Collapsed Length, Model# 69.777.001
Brand: Braber Equipment
Complete driveline is economical and easy to install, so you don't have to spend time trying to repair damaged or worn shafts. Can be cut to desired length to meet your driveline needs. Meets all ASAE standards. | *$69.99 |
 | Braber Equipment General-Purpose PTO Shaft Assembly - 60in. Collapsed Length, Model# 69.777.260
Brand: Braber Equipment
Complete driveline is economical and easy to install, so you don't have to spend time trying to repair damaged or worn shafts. Can be cut to desired length to meet your driveline needs. Meets all ASAE standards. | *$89.99 |
 | Standard MSDS Binder - 1.5" Diameter Rings
Brand: Brady Part Number: 45989BY
Store critical Material Safety Data Sheets (MSDS) information in a highly visible polyethylene MSDS Binder. And, every binder comes with a 36" chain and a pair of sheet lifters. | *$23.53 |
| Standard MSDS Binder - 2.5" Diameter Rings
Brand: Brady Part Number: 45990BY
Store critical Material Safety Data Sheets (MSDS) information in a highly visible polyethylene MSDS Binder. And, every binder comes with a 36" chain and a pair of sheet lifters. | *$32.78 |
| Standard MSDS Binder - 3" Diameter Rings
Brand: Brady Part Number: 45991BY
Store critical Material Safety Data Sheets (MSDS) information in a highly visible polyethylene MSDS Binder. And, every binder comes with a 36" chain and a pair of sheet lifters. | *$34.32 |
| Standard MSDS Binder - 1.5" Diameter Rings (w/Inserts)
Brand: Brady Part Number: 45336BY
Store critical Material Safety Data Sheets (MSDS) information in a highly visible polyethylene MSDS Binder. And, every binder comes with a 36" chain and a pair of sheet lifters. | *$35.54 |
 | Brand Hydraulics Monoblock Loader Valve, Model# PLV22TSTKAB
Brand: Brand Hydraulics
The Brand Hydraulics monoblock loader valve is a 2-spool loader valve rated for 10 GPM and 4500 PSI, with adjustable relief preset at 2000 PSI. Spool actions are spring-centering and 4th position float. Tandem center spools with joystick handle. U.S.A. Max. Flow (GPM): 10, Inlet Port (in.): 8 SAE, Outlet Port (in.): 8 SAE, Max. PSI: 4,500, Spool (qty.): 2 | *$199.99 |
 | Aluminum Work Platform
Brand: BRAND NOT SPECIFIED Model: 29380 Part Number: 29380
Foldable Aluminum Work Platform is sturdy. Movin' on up like the Jeffersons classic TV series! Use this sturdy height booster for washing tall RVs, SUVs, home windows, painting, general maintenance and much more. Safe and more comfortable than a step ladder! Sure-footed design; Lightweight at only 10 lbs.; Securely locks both legs for safety; Conforms to ANSI rating; Folds down for compact storage; 27 x 11 3/4 x 16 1/2" h. (set up). Add this baby to your tool arsenal today for long-term service! Aluminum Work Platform | *$29.99 |
 | 2 Never Flat 2-wheeler Tires
Brand: BRAND NOT SPECIFIED
SAVE BIG! "Rollin', rollin', rollin', keep that hand-truck rollin'..." With these Never Flat 10" 2-wheeler Tires that fear no puncture! Made tough, with sturdy tread and foam core that keeps them rolling no matter what. Great for handtrucks, dollies, platform carts, wagons and more. A stable 4" wide. Smooth-rolling hub with 5/8" bearing. 13 lbs. Tread patterns may vary. Get 'em ONLINE now! 2 Never Flat 2-wheeler Tires | *$34.97 |
 | Heavy-duty Welding Cart
Brand: BRAND NOT SPECIFIED
Make it easier on yourself and on your project... with this Heavy-duty Welding Cart. SAVE BIG! Do your MIG welding the easy, efficient way. This Welder Cart has 4 heavy-duty wheels: 2 fixed and 2 smaller swivels. So you don't lug stuff around, you glide it around. It has 3 shelves (cylinder rack / MIG tray / storage tray) for easy organization and access to supplies. The industrial-grade paint coating resists chipping and rust. It's 28 x 12 x 28"h. Weighs 29 lbs., 9 ozs. This is the easy, efficient and big-money-off affordable way to do your welding jobs right! Order ONLINE Now! Please Note: This is a Heavy / Bulky item. $5.00 for heavy / bulky shipping and handling will be charged in addition to regular shipping and handling. Heavy-duty Welding Cart | *$69.99 |
 | Brinsea Mini ADVANCE Egg Incubator
Brand: Brinsea
The Mini Incubators are small, high quality, low cost, egg incubators combining ease of use, performance and exceptional value.
The Mini gives a choice of convenience, sophistication and price but provides the essential environmental control necessary for successful egg hatching.
The clear walls of the egg chamber mean fantastic visibility of the hatching eggs without lifting the lid and the fan-assisted design coupled with detailed airflow analysis results exceptionally even heating of the eggs. | *$139.99 |
 | NEW Brinsea Advance Autoturn Mini Incubator: 10 Egg
Brand: Brinsea Model: MINIADV Part Number: MINIADV
Watch your eggs hatch, every time ...
The Brinsea Mini incubator is a small, high quality, low cost, egg incubator combining ease of use, performance and exceptional value. The two versions of the Mini give a choice of convenience, sophistication and price but both provide the essential environmental control necessary for successful egg hatching. The clear walls of the egg chamber mean fantastic visibility of the hatching eggs without lifting the lid and the fan-assisted design coupled with detailed airflow analysis results exceptionally even heating of the eggs. The Mini Advance version provides automatic egg turning with autostop 2 days prior to hatching, countdown to date-of-hatch and temperature alarms on its digital display so youÕll always know the status of your hatch. Eggs are turned by rotating egg disks. Two disks are available, one for 7 eggs of all sizes up to duck (supplied as standard) with a second small egg disk holding 12 eggs up to the size of pheasant available as an optional extra. Humidity is provided for with central water reservoirs in both models and both operate at low voltage (from mains adapters supplied) for safety. Advance control system. The Brinsea Mini Advance incorporates digital micro-control which allows the user to manage incubator functions via a simple menu on the digital display. In normal operation the display shows incubation temperature, days to hatch and turning status. Opening the menu allows the user to adjust incubation temperature, the unit (°C or °F), turning interval, turning angle, number of days your eggs take to hatch and high and low temperature alarm limits. The Brinsea Mini Eco and Mini Advance incubators are designed to use for the education of children although they are not toys and should be used only under adult supervision. Maximum egg Capacities (approx): Quail 12 Pheasant 12 Hen 7
Duck 7 Specs: Power 18 Watts Max, 12 Watts typical average. Dimensions H x D (6.5 x 8) Electrical supply 115V 60Hz | *$155.00 |
 | Brinsea Octagon 20 ECO Auto Turn Egg Incubator
Brand: Brinsea Model: AE22C Part Number: AE22C
The Octagon 20 Eco Autoturn Incubator is a simple but high quality egg incubator. A simple proven electronic temperature control gives reliable hatching results of a wide range of species with minimum fuss. This is an incubator for the cost-conscious and those who require simplicity over features. FEATURES INCLUDE: Egg capacity of 24 hens eggs or equivalent - Simple and accurate proportional band electronic temperature control - Temperature factory preset at 99.5 F - Flashing temperature indicator and conventional but accurate liquid in glass thermometer - Fan assisted air circulation - proof adjustment - Insulated for low energy use and optimal temperature distribution. The unit controls temperature with high accuracy using a proven proportional band electronic controller. A flashing indicator shows that the incubation temperature is being controlled steadily and temperature is monitored. The high quality incubator cabinet is entirely injection moulded from high grade ABS which makes it tough and easy to clean. The base is double skinned and foam filled to reduce heat loss leading to lower electricity consumption and better temperature distribution. The top of the incubator is clear allowing good visibility of the eggs and chicks. Air is circulated by a long life computer grade fan which, coupled with the unique grill with optimized air diffuser leads to extremely even air temperature throughout the egg chamber. Fresh air is controlled with a vent slider and humidity is provided by water in two reservoirs in the base. To accommodate eggs of different sizes the Octagon 20 Eco's removable egg tray is supplied with dividers which the user can position to suit their eggs. Eggs are turned automatically during incubation as the whole incubator is slowly rocked from side to side. Full factory warranty. | *$199.99 |
| NEW Brinsea Economy Mini Incubator: 10 Egg
Brand: Brinsea Model: MINIECO Part Number: MINIECO
The Brinsea Mini incubator is a small, high quality, low cost, egg incubator combining ease of use, performance and exceptional value. The Mini Eco holds 10 hens eggs (or equivalent) and provides the fine temperature control to ensure consistent and reliable hatches. Temperature is monitored on a purpose built liquid-in-glass thermometer and although factory set, the electronic temperature control allows fine tuning of the temperature setting if required. Humidity is provided for with central water reservoir and the Mini Eco operates at low voltage (from mains adapters supplied) for safety. The Brinsea Mini Eco incubator is designed to use for the education of children although they are not toys and should be used only under adult supervision. Maximum egg Capacities (approx)
Quail 24
Pheasant 12
Hen 10
Duck 8
Technical Specification
Weight Eco - 0.85Kg (1.9lbs)
Advance - 0.95Kg (2.1lbs)
Power
Consumption 18 Watts Max,
12 Watts typical average
Dimensions
H x D 165 x 222 mm
(6.5 x 8)
Electrical supply 115V 60Hz as specified
Unit is shown at left in picture next to the autoturn, Mini Advance version. | *$84.99 |
 | Galvanized Heavy Duty 4 Hole Poultry Nest Box
Brand: Brower Model: 404B Part Number: 404B
Model 404B 4 Hole Nest. Easy to assemble. All exposed edges folded to prevent injury. Ventilation holes in partitions for fresh air flow. Nest bottoms are removable for easy cleaning and litter replacement. Double bolted perches are hinged to allow closing. Hangers are standard. Nests can be staggered back to back to prevent hens from passing between tiers. Not a roll out nest. | *$139.99 |
 | Incubator Brower TopHatch Autoturn Egg
Brand: Brower Manufacturing Model: THI20 Part Number: THI20
A complete design in durable construction! Fewer hot or cool spots because of factory installed fan. Universal rack handles eggs from quail to geese! No holes to cut in styrofoam. No styrofoam means no pourous walls and base to collect pathogens. No tiny fogged up viewing windows... entire top is "see through". Capacity (approx) Chicken: 48 - Quail: 120 - Pheasant: 48 - Turkey: 24 - Goose / Peafowl: 16
110 Volt / 60 Hz
Due to the size of this item, to save you some money, we will have it shipped to you right from the manufacturer. This saves you the imbedded cost of double shipment ... them to us ... and then us along to you! | *$169.99 |
 | Brooder Brower - Heated Chick Quail Brooder w/ Accessories
Brand: Brower Manufacturing Model: CBQ20 Part Number: CBQ20
One unit for most any species (poultry or gamebird/waterfowl). Universal feed trough holds approx. 7 lbs pelleted feed universal drinker holds 3.3 liter - both included. Removable droppings pan. Organize your production so you can raise more birds with less effort and less space. Includes 2 sliding solid side panels allowing brooder to be more uniformly warm the first few days. Heater pilot light and full-on pilot light standard. PVC coated 1/2" x 1/2" wire mesh floor. Top opens. Full 10" interior headroom. Capacity approx. 100 poultry chicks to 2nd week: 50 to 4th week. 100 quail / 50 chukar or pheasant to 4th week: 50 poults to 2nd week - 25 poults to 4th week. Stackable to 5 high.....no extra parts needed. Caster base multiple outlet panel available for stacking configurations. | *$277.99 |
| | Browning 22XL037-6FS3 Xl,22 Th,1/4 Bore Timing Belt Pulley
Brand: Browning Part Number: 22XL037-6FS3
Pulleys Number of Teeth: 22 Inside Diameter: 1/4 Fractional Belt Width: 1/4, 3/8 Outside Diameter: 1.381 In. | *$16.77 |
 | Browning SCZ01X1/2 3l Only Scz01 X 1/2 Die Cast Sheaves-4 Step
Brand: Browning Part Number: SCZ01X1/2
Die Cast Aluminum Sheaves - Multi Groove Stepped Bore Diameter: 1/2 Type: Multi Groove Stepped Sheave Material: Zinc Alloy | *$21.54 |
| | Browning 1VP40-3/4 1vp40x3/4 Variable Pitch Sheave
Brand: Browning Part Number: 1VP40-3/4
Single Groove Variable Pitch Sheaves SheaveType: 1 Inside Diameter: 3/4 Outside Diameter: 3.75 In. Belt Section: 3L, 4L, A, 5L, B Maximum Face Width: 1-1/16 Minimum Face Width: 11/16 | *$25.14 |
| | Browning 1VP40-5/8 1vp40x5/8 Variable Pitch Sheave
Brand: Browning Part Number: 1VP40-5/8
Single Groove Variable Pitch Sheaves SheaveType: 1 Inside Diameter: 5/8 Outside Diameter: 3.75 In. Belt Section: 3L, 4L, A, 5L, B Maximum Face Width: 1-1/16 Minimum Face Width: 11/16 | *$25.14 |
| Browning SCZ6X7/8 3l/4l Scz6 X 7/8 Die Cast Sheaves-4 Step
Brand: Browning Part Number: SCZ6X7/8
Die Cast Aluminum Sheaves - Multi Groove Stepped Bore Diameter: 7/8 Type: Multi Groove Stepped Sheave Material: Zinc Alloy | *$40.84 |
 | Bruce Dundee Plank Natural Hardwood Flooring
Brand: Bruce Part Number: CB1210
22 S/FT, 1 per Box long, 3.250 Inch wide, 0.750 Inch thick, 60 lbs, Beige, Solid, Plank, Urethane, Dura-Luster Plus, Red Oak, 1290 Janka hardness, Semi-gloss, Micro Beveled edge, Square end, nail down install, 15 year warranty sold by the box. | *$78.76 |
 | Recon 17,500lb Brute Force Series Winch
Brand: BRUTE FORCE Part Number: 264100BFW
RECON's new "Recovery Division" has everything you need if you are serious about mudding, off-roading, rock climbing, or salvage recovery. RECON's new Pro Performance Series Winches Brute Force Series Winches are the best money can buy we back that statement up with a limited lifetime warranty.
So whether you're 4 feet deep in a Louisiana swamp, sliding along on red Georgia clay, jumping sand dunes in Arizona, sandwiched between 2 rock mountains somewhere in Utah, or up to your windshield in fresh white powder, RECON's new line of award winning winches will give you the piece of mind you need so you don't get stuck way out in the boondocks.
RECON's newest award-winning winches have raised the bar with regards to reliability, line speed, and pulling power. With the fastest line speed (28 feet per minute) of any serious winch sold in the automotive aftermarket enough pulling capacity (17,500LBS) to get you out of even the most serious bind. | *$475.00 |
 | Low Profile Car Ramps
Brand: Brute Industries Model: Race-R Part Number: Race-R
100% Solid core, lighweight low profile sport car ramps able to support up to 3,000 lbs. Each 56" L x 12" W x 8" H sport car ramp weighs only 10 lbs and features a trim 10.78 degree loading angle. Ideal for use with low ground clearance vehicles and will not damage hot asphalt, cement or painted floors. | *$189.99 |
 | Light Blue Bucket Lid
Brand: Bucket Lidz Model: LB-1051 Part Number: LB-1051
Heavy Duty Bucket Lid. By Bucket Lidz. | *$4.95 |
 | Buffalo Tools GSGRS Guard Rail System Set for GSSI Scaffolding Unit
Brand: Buffalo Model: GSGRS Part Number: GSGRS
Buffalo Tools Guard Rail System Set. Stay safe atop your scaffolding with this Guard Rail System. Steel frame construction with powder coat finish. Measures 5'8" x 2'5" x 3'3". Order Now! Please Note: This is a Heavy / Bulky item. $110.00 for heavy / bulky shipping and handling will be charged in addition to regular shipping and handling. This item is shipped directly from the factory. Please allow an extra 2-4 weeks for delivery... sorry no express shipping available. We are unable to ship factory direct items to Alaska, Hawaii, Canada, Puerto Rico or APO or FPO addresses. Buffalo Tools Guard Rail System Set | *$124.00 |
 | Buffalo Tools DWCART 3,000-Pound Capacity Drywall Cart
Brand: Buffalo Model: DWCART Part Number: DWCART
Buffalo Tools 3,000 - lb. Capacity Drywall Cart. This 3,000-lb. Capacity Drywall Cart is ideal for hauling drywall, paneling, pegboard, plywood, doors and many other construction materials around your home or shop. Travels on four 8" swivel casters, 2 locking. Handle can be removed for easy transportation and storage! Deck measures 3'7" x 1'. Get yours now! Buffalo Tools 3,000 - lb. Capacity Drywall Cart | *$175.00 |
 | Buffalo Tools GSSI Multi-Purpose Scaffolding
Brand: Buffalo Model: GSSI Part Number: 52932384
Buffalo Tools Multi-Purpose Scaffolding. Get a leg-up on your next home repair or remodeling project with this Multi-Purpose Scaffolding. Great for interior or exterior use. Ultra-durable with a 1,000-lb. working load capacity. 1/2" plywood deck with steel frame. Easy-roll 5", 360 Degree swivel casters with foot brake. Measures 6'2" x 2'5" x 6'3" when assembled. Get yours now! Please Note: This is a Heavy / Bulky item. $175.00 for heavy / bulky shipping and handling will be charged in addition to regular shipping and handling. This item is shipped directly from the factory. Please allow an extra 2-4 weeks for delivery... sorry no express shipping available. We are unable to ship factory direct items to Alaska, Hawaii, Canada, Puerto Rico or APO or FPO addresses. Buffalo Tools Multi-Purpose Scaffolding | *$199.00 |
 | Buffalo Tools GSORSET Outrigger for GSSI Base Scaffolding Unit, 18-Inch, 4-Pack
Brand: Buffalo Model: GSORSET | *$39.99 |
 | Buffalo Tools 600 - lb. Trailer Dolly
Brand: Buffalo
Buffalo Tools 600 - lb. Trailer Dolly. This Buffalo Tools Trailer Dolly easily moves a load of up to 600 lbs. over most terrain. 49" handle and 10" x 3" pneumatic all-terrain tires with steel rims make moving heavy items a breeze. Trailer Dolly has heavy-duty steel construction with a powdercoat paint finish. 1 7/8" trailer hitch ball included. Get yours now! Buffalo Tools 600-lb. Trailer Dolly | *$59.97 |
 | Buffalo Tool GSORSET Scaffolding Outrigger
Brand: Buffalo Part Number: GSORSET
A 4 piece set of 18" outriggers for use with model No. GSSI multipurpose scaffolding system. The powder coated finish steel frame may be used interior or exterior. The outrigger extends the width of the base so that units can be stacked. Wheels do not com | *$72.22 |
 | Buffalo Tools GSM4 Roll-and-Fold Mini Scaffold, 4-Foot
Brand: Buffalo Model: GSM4 Part Number: 52932385
Tackle household projects with this 4' scaffolding. The portable design includes 4" casters that lock into place for safe support. The dual platforms also function as steady work surfaces or storage shelves, and a durable powder-coat paint covers the steel deck boards with a nonslip finish.bProduct Features:/bul500-lb. load capacity (250 lb. per platform)Adjustable-height steel deck boards with a powder-coat paint finishNonslip finish on each platform for safety4" swivel locking casters for portability and maneuverability4" folding width for space-saving storageAssembly requiredDimensions: 4'l x 2'w x 4'h/ul(Model GSM4) | *$79.84 |
 | Builder's Best, Inc. 0-18" Adjustable Periscope Dryer Vent 110172
Brand: BUILDER'S BEST, INC. Model: 110172 Part Number: 110172
Use where outlets overlap or are very close. Adjusts to reach the side of most dryers. Rigid aluminum construction meets dryer manufacturer specifications and building codes. Contains: 4" male snap-lock fitting and 4" collar. For dryer connection as close as 2" from the wall. Sections are not reversible. Draw band female collar. | *$15.07 |
 | Builders Edge #140137079-095 Clay Exhaust Vent
Brand: Builders Edge Model: 140137079-095 Part Number: 532070-95
Clay Colored, Exhaust Vent, Dryer Exhaust Vent For All Side Walls, Patented Exhaust Flaps Stay Closed When Not In Use, Maintenance-Free, Color Molded-Through, Comes Complete With 8" Aluminum Tube 4" Diameter, Net Free Area 12 SQIN, 40 Year Warranty. | *$11.49 |
 | Builders Edge #140137079-123 White Exhaust Vent
Brand: Builders Edge Part Number: 532070-123
White, Exhaust Vent, Dryer Exhaust Vent For All Side Walls, Patented Exhaust Flaps Stay Closed When Not In Use, Maintenance Free, Color Moded Through, Comes Complete With 8" Aluminum Tube, 4" Diameter, Net Free Area 12 SQIN, 40 Year Warranty. | *$15.14 |
 | PR 15x72 BLK Shutter
Brand: Builders Edge Part Number: 010140072-002
Pair, 15" x 72" Black Vinyl Louvered Shutter. | *$39.82 |
 | Builders Edge #130110006-123 White Surface Block
Brand: Builders Edge Model: 130110006-123 Part Number: 532060-123
White, Surface Block, A Patented 1 Piece Mounting Block, For Installing Exterior Fixtures After The Siding Is Up, For 4", 5", 6", 8" 10" Siding. | *$5.40 |
 | Gutter Stuff Foam Filter, 5" x 4'
Brand: Builders Roofing Model: GS-K5 Part Number: GS-K5
Keeps debris from entering the gutter. Truncated feature will keep leaves out and prevent ice and debris from entering in the back of the gutter. Does not lose support, bend or sag. Fits completely inside any 5" K style gutter - the most common style andsize on the market for residential homes. Made of durable, lightweight outdoor polyether foam. Installed by inserting a section into a standard gutter and sliding it under the straps. The insert fits snugly and is invisible. Insert can be cut with scissors or a knife at a corner, if needed, and installation is complete. Does not require a contractor or special tools. Includes a UV stabilizer and germicide. Prevents mosquitoes from breeding in the gutter. Filter is non-absorbent, allowing water to run through. Pore size allows the smallest particles to pass through and keeps the larger particles on top to blow off. | *$15.79 |
 | BullDog Winch Accessory Bow Shackle 7/8" for 9500 lb and 12000 lb Winches - up to 13,000lbs Capacity
Brand: Bulldog Part Number: 20021
Bulldog winches offer a variety of winch accessories including bow shackles. | *$16.82 |
 | BullDog Winch Accessory Soft Winch Cover (Fits all Bulldog 6,000lb to 12,000lb Truck Winches)
Brand: Bulldog Part Number: 20046
Bulldog winches offer a variety of winch accessories including winch covers. | *$21.07 |
 | BullDog Winch Wiring Quick Connect for Truck Winches, fits 4 to 0 gauge wires, one set
Brand: Bulldog Part Number: 20018
Bull dog winch company offers a variety of wiring and accessories for winches. | *$24.99 |
 | BullDog Winch Accessory Pulley Block for 8000 lb to 12000 lb Winches - 17,000lb Max/ 7,000lb Working Load Capacity fits up to 3/8" wire rope
Brand: Bulldog Part Number: 20005
Bulldog winches offer a variety of winch accessories including pulley blocks. | *$35.52 |
 | BullDog Winch Accessory Snatch Block Heavy Duty - 19,000lb Max/ 8,000lb Working Load Capacity - Fits up to 3/8†(9.5mm) dia. wire rope
Brand: Bulldog Part Number: 20049
Bulldog winches offer a variety of winch accessories including snatch blocks. | *$46.57 |
 | BullDog Winch Accessory Snatch Pulley Block Heavy Duty - 24,000lb Max/ 9,000lb Working Load Capacity
Brand: Bulldog Part Number: 20027
Bulldog winches offer a variety of winch accessories including snatch pulley blocks. | *$81.42 |
 | Four Step Stool Kitchen Ladder
Brand: Buyer's Choice USA Model: 142CMY-604ST Part Number: 142CMY-604ST
4 Step Stepstool Ladder
Our high quality sure footed 4 step kitchen stool lets you get to those hard to reach places around our home. Our home ladder has oversized treads with nonslip rubber mats and a sturdy steel frame that folds nearly flat when you need to store it. A great stepstool to use anywhere in the home. 4 Steps with non slip rubber mats. Grip pad covers the handle. Material: Steel Color: Silver Gray. Weight of Ladder: 18.2 lbs Step Size: 15. Max Load: 330 lbs. Open Height: 34.2. Width of ladder: 18.7. Space between two steps: 8.2. Height from floor to first step: 9. Height from floor to second step: 18.5. Height from floor to third step: 27.9. Height from floor to fourth step: 37.4 | *$74.95 |
 | Buyers Fluid Level Gauge With Thermometer
Brand: Buyers
Fluid level gauge mounts on side wall of reservoirs up to in. wall thickness. Metal cover protects gauge from damage. Includes thermometer. Mounts with hollow in.-13 bolts on 5in. centers. 6.5in.H x 1.5in.W x 2.2in.D. | *$16.99 |
