 | Pergo 45115 Installation Kit for Laminate Flooring
Brand: Simple Solutions Model: 45115 | *$9.95 |
 | SIMPSON DURAVENT 46DVA-HC EXHAUST VENT ACCESSORY 4"
Brand: Simpson Dura-Vent Model: 46DVA-HC Part Number: 46DVA-HC
"SIMPSON DURAVENT" EXHAUST VENT ACCESSORY
For horizontal (through-wall) terminations only. Check installation instructions for restrictions on horizontal cap terminations such as minimum distance from windows and doors.
4"
For Direct vent gas stoves or fireplaces
Square horizontal termination cap
Aluminum finish
Twist lock construction
Exterior laser welded seams
For use with 6-5/8"O.D. direct vent gas appliances vented horizontally. | *$86.99 |
 | 2" Thick Partition Panels - Acoustic Blanket - 4' x 6'
Brand: Singer Safety Part Number: WS-1105 | *$186.20 |
 | Low Profile Pallet Jack
Brand: SJF Material Handling
Engineered for strength, dependability and long life, this is SJF's choice as the #1 pallet jack on the market today. Lo-Profile models feature a lowered fork height of 2 inches.
Lifting - Neutral - Lowering. No foot pedal means extra safety. Neutral allows pumping at the most convenient angle to the operator and free handle movement when the truck is in motion. The handle returns automatically to the vertical position.
NOTE: When shipping to Residential, apartment, dormitories, estates, farms, ranches, rectories, military address, schools, construction sites, mine sites, prisons or other locations not open to walk in service - you will be subject to a LIMITED ACCESS FEE.
Subject to tax in the following states: CA, Fl, IL, IN, MN, TX, WA. | *$277.50 |
 | 3/4" Bench Dogs, Plastic Coated (4)
Brand: Sjobergs Part Number: 33290
SJOBERGS of Sweden has been manufacturing top quality workbenches for over 80 years. Their entire product line of workbenches was designed to meet the needs of a modern day woodworker and to take advantage of the latest manufacturing techniques. The range of features is truly amazing and cannot be matched by any other manufacturer. Four 3/4" plastic steel bench dogs fit Sjobergs Duo and all Nordic Plus Workbenches. | *$41.99 |
 | New 2000 Lb Hand Cable Winch Boat Trailers Auto Marine
Brand: Sky Enterprise USA
You are viewing a Brand New 2000 Lb capacity hand crank winch. Perfect for for lifting or pulling with ease. The ratcheting action keeps the line in place and can be released or tightened with ease. The Zinc plated heavy gauge steel frame ensures a long life. The drop forged, galvanized steel safety-latch hook stays where you put it. The cable is 5/32" X 27 Feet. | *$19.99 |
 | New 5 Ton Come Along Winch Hoist Puller 3 Hook 2 Gear Puller
Brand: Sky Enterprise USA
You are viewing a Brand New 5 Ton Come A Long. This tool is made by Neiko Tools USA. This is the upgraded heavy duty come a long. We guarantee you professional quality or your money back no questions asked.p liBrand New in Retail Packaging liHeavy Duty Steel Construction li3 Hook 2 Gear Design liForged Steel Zinc Plated Hook Gear liThumb control release liDual ratcheting system for heavy duty loads liCable: 6mm thick x 3.6 meters long liHandle: 4.5mm x 54 cm liHook opening: 25 cm liPulling capacity: 10,000 lbs liMade by Neiko Tools USA | *$29.95 |
 | New Pro 1000 Engine Stand Hoist Automotive Tools Lift
Brand: Sky Enterprise USA
You are viewing a Brand New Heavy Duty Engine Stand. This is not the cheap engine stand that you see everyone else selling. We guarantee you the best price on the internet.pulliSupports up to 1000lb engineliRolling casters for easy mobility in the garageliPerfect for storing or working on small blocks!liColor may varyliBrand new and comes in original factory packaging/ul | *$44.99 |
 | New Hydraulic 20 Ton Air Bottle Jack Air Tools Auto Heavy Duty Quality
Brand: Sky Enterprise USA
Capacity 20 Ton Designed for Fast Lifting and Convenient Servicing of Vehicles. Features: Reasonable Structure, Easy operation, Safe and Reliable Use. Operates Manually or With Air. Safety Overload System Prevents Jack From Being Used Beyond its Rated Capacity. Small Dimension, Large Carrying Capacity, High Pressure Resistance Performancep liCapacity: 20 Ton (40000 LBS) liLifting Range: 26-51CM (10-1/4"~201/16") liMin. Height: 26CM (10-1/4") liMax. Height: 51CM (201/16") liAdjustable Height: 8.2CM (3-1/4") liMin. Air Input: 0.7Mpa liMax. Air input : 1.0Mpa liPneumatic Pressure: 120-200 PSI liDesign For Heavy Commercial Use liFast Efficient Air Pump Reduces Lifting Time liHardened Alloy-Palated Ram For Maximum Durability liAir Valve With Integrated Filter, Seales Hydraulic Unit liHeavy-Duty Air Motor Provides Maximum Power p | *$59.90 |
 | NEW DRYWALL STILTS PAINTING STILT ALUMINUM 18-30" BLACK
Brand: Sky Enterprise USA
You are viewing an auction for a Brand New Heavy Duty pair of aluminum drywall stilts. This product will insure great balance, more stability, and of course perfect painting. Never again, worry about getting to those hard to reach places. These are industrial grade drywall stilts. We can guarantee you the best quality or your money back no questions asked!pliBrand new in retail packagingliAttractive black designliHeavy gauge overlapping aluminum leg tubes liLight weight construction for easy motion liParts replaceable to ensure years of safe and continuous use liAdjustable calf brace, metal buckle straps and heel plates for added comfort li3-position heel bracket accommodating different foot sizes and preventing slippage in every direction liLock nuts installed at all crucial pivots and connecting points for greater reliability Safe and comfortable self-locking strap buckles Dual action springs liAdjustable from 18" to 30" (Please checkout our other auctions for size 24"-40")liMultiple colors availableli225lb Load CapacityliMinimal assembly required liReduced price! Save over 50% | *$84.95 |
 | NEW DRYWALL STILTS PAINTING STILT ALUMINUM 24-40" BLACK
Brand: Sky Enterprise USA
You are viewing an auction for a Brand New Heavy Duty pair of aluminum drywall stilts. This product will insure great balance, more stability, and of course perfect painting. Never again, worry about getting to those hard to reach places. These are industrial grade drywall stilts. We can guarantee you the best quality or your money back no questions asked!pliBrand new in retail packagingliAttractive black designliHeavy gauge overlapping aluminum leg tubes liLight weight construction for easy motion liParts replaceable to ensure years of safe and continuous use liAdjustable calf brace, metal buckle straps and heel plates for added comfort li3-position heel bracket accommodating different foot sizes and preventing slippage in every direction liLock nuts installed at all crucial pivots and connecting points for greater reliability Safe and comfortable self-locking strap buckles Dual action springs liAdjustable from 24" to 40" (Please checkout our other auctions for size 18"-30")liMultiple colors availableli225lb Load CapacityliMinimal assembly required liReduced price! Save over 50% | *$89.95 |
 | 5 Foot Single Sided Compact Folding Ladder
Brand: SLD S-5 Model: SLD-S5 Part Number: SLD-S5
This is the perfect ladder for those little jobs around the house or office where you don't want to carry in a big heavy ladder. This product closes up to 3 1/2 inches by 3 1/2 inches y 61 inches long | *$76.00 |
 | Prime Line Prod. 16451 Closet Door Floor Guide
Brand: Slide-Co Model: 16451 Part Number: 16451
For use on by pass wardrobe door. Nylon construction for 1 3 8" thick doors. Universal design. 1 per card. | *$1.39 |
 | 8PK 3/4x1/2 DR Clip
Brand: Slide-Co Model: PL 7955 Part Number: PL 7955
"SLIDE-CO" STORM DOOR PANEL CLIP
3/4" L x 1/2" W
Self Locking Storm Door Panel Clips With Screws
Mill Finish
8 Pack | *$2.99 |
 | Prime Line Prod. 17390-RB Casement Operator
Brand: Slide-Co Model: 17390-RB Part Number: 17390-RB
Right hand. 9" arm. Zinc die cast bronze finish. All mounting hardware is included. 1 per card. | *$8.95 |
 | Acetal Idler Pulley .750"OD x B Dia. .128" Cable Size Up To 3/64"
Brand: Small Parts Part Number: IPD-12-01
Idler pulleys are intended to control cables thourgh directional changes. They are constructed of black Delrin (Acetal) and exhibit high mechanical strength, rigidity, resiliency and have excellent fatigue endurance unmatched by most plastics. | *$1.50 |
 | Glass Reinforced Nylon V-Belt Pulley 4.5" Diameter 1/4" Bore, For 1/8", 3/16", 1/4" Belt
Brand: Small Parts Part Number: PNG-4-72-01
Glass-reinforced pulleys are especially designed for fractional horsepower drives requiring high strength-to-weight ratios. Glass-reinforced nylon is molded to steel hubs for extra strength. Hubs are drilled, tapped and supplied with stainless steel (10-24) set screws. Hub Diameter: 15/16 inches. Overall Height: 1 inch. | *$12.00 |
 | Stainless Steel Lag Bolt, Hex Head, 5/16", 5" Length (Pack of 10)
Brand: Small Parts Part Number: HLB-SS016-10
Also known as Lag Bolts, Lag Screws come in longer lengths than wood screws and are easy to tighten with a wrench. brbr Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness. These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements. The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels.  Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316). Another common naming convention for Austenitic Stainless Steels are 18/8, 18/10, 18/0, etc. where the 18 refers to the % of Chromium and 8 to the % of Nickel contained in the material.   brbrHex head fasteners can be driven with simple wrenches, and require minimal clearance above the fastener because they can be driven or loosened from the side. brbr | *$14.59 |
 | Zinc Plated Steel Lag Bolt, Hex Head, 3/8", 7" Length (Pack of 25)
Brand: Small Parts Part Number: HLB-ZP040-25
Also known as Lag Bolts, Lag Screws come in longer lengths than wood screws and are easy to tighten with a wrench. brbr Steels are designated by a 4 number SAE Steel grade. The first two digits indicate the primary materials used to form the steel. The last 2 digits identify the percentage of carbon for the alloy (in hundredths). The steel used in these fasteners has a tensile strength ranging from 100,000 to 150,000 psi (pounds per square inch). Zinc Plating helps to prevent corrosion.brbrHex head fasteners can be driven with simple wrenches, and require minimal clearance above the fastener because they can be driven or loosened from the side. brbr | *$16.67 |
| Stainless Steel Lag Bolt, Hex Head, 3/8", 1-1/2" Length (Pack of 25)
Brand: Small Parts Part Number: HLB-SS017-25
Also known as Lag Bolts, Lag Screws come in longer lengths than wood screws and are easy to tighten with a wrench. brbr Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness. These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements. The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels.  Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316). Another common naming convention for Austenitic Stainless Steels are 18/8, 18/10, 18/0, etc. where the 18 refers to the % of Chromium and 8 to the % of Nickel contained in the material.   brbrHex head fasteners can be driven with simple wrenches, and require minimal clearance above the fastener because they can be driven or loosened from the side. brbr | *$16.93 |
 | Delrin 0.0816 Pitch 40DP Timing Belt Pulley 0.870" Dia. 1/4" B, For up to 1/4" Width Belt
Brand: Small Parts Part Number: 40DP-34/S-01
Single Sided Posi-Drive 40DP Delrin Timing Belt Pulleys .0816 Pitch for Belts up to 1/4 Wide. Material is Grey Delrin. | *$2.25 |
| Delrin .0816 Pitch 40DP Timing Belt Pulley .272" Dia. 3/32" B, For up to 1/4" W Belt
Brand: Small Parts Part Number: 40DP-11/D-01
Double Sided Posi-Drive 40DP Delrin Timing Belt Pulleys .0816 Pitch for Belts up to 1/4 Wide. Material is Grey Delrin. | *$2.72 |
| Delrin .0816 Pitch 40DP Timing Belt Pulley .506" Dia. 3/16" B, For up to 1/4" W Belt
Brand: Small Parts Part Number: 40DP-20/D-01
Double Sided Posi-Drive 40DP Delrin Timing Belt Pulleys .0816 Pitch for Belts up to 1/4 Wide. Material is Grey Delrin. | *$2.72 |
 | Nylon Glass Filled Single Flange Timing Belt Pulley 1/5" Pitch, 1/4" B, .955" Pitch Dia.
Brand: Small Parts Part Number: TBPN-15/S-01
These 1/5 inch Pitch (XL) Pulleys are precision molded to match belt configuration and provide accurate register between drive and driven shafts. They are molded of fiberglass-reinforced nylon for light weight, exceptional strength and quiet running characteristics. All hubs are drilled, tapped and supplied with stainless steel set screw. For certainty of attachment, pulleys can be cross drilled and fixed with a bolt or dowel pin. | *$3.27 |
| Delrin .0816 Pitch 40DP Timing Belt Pulley 1.546" Dia. 1/4" B, For up to 1/4" W Belt
Brand: Small Parts Part Number: 40DP-60/S-01
Single Sided Posi-Drive 40DP Delrin Timing Belt Pulleys .0816 Pitch for Belts up to 1/4 Wide. Material is Grey Delrin. | *$3.32 |
| Delrin .0816 Pitch 40DP Timing Belt Pulley 1.078" Dia. 1/4" B, For up to 1/4" W Belt
Brand: Small Parts Part Number: 40DP-42/D-01
Double Sided Posi-Drive 40DP Delrin Timing Belt Pulleys .0816 Pitch for Belts up to 1/4 Wide. Material is Grey Delrin. | *$3.48 |
| Delrin .0816 Pitch 40DP Timing Belt Pulley .636" Dia. 1/4" B, For up to 1/4" W Belt
Brand: Small Parts Part Number: 40DP-25/S-01
Single Sided Posi-Drive 40DP Delrin Timing Belt Pulleys .0816 Pitch for Belts up to 1/4 Wide. Material is Grey Delrin. | *$3.50 |
| Acetal Idler Pulley 1.75"OD x B Dia .254", Cable Size Up To 1/8"
Brand: Small Parts Part Number: IPD-28-01
Idler pulleys are intended to control cables thourgh directional changes. They are constructed of black Delrin (Acetal) and exhibit high mechanical strength, rigidity, resiliency and have excellent fatigue endurance unmatched by most plastics. | *$3.50 |
 | Bearing Mounted Nylon Pulleys UP-4125 1/4" Bore x 1-1/2" OD x .312" Thickness
Brand: Small Parts Part Number: PNB-4/24-01
Bearing mounted Nylon Pulleys are designed for use with small cables or cords where moderate load and speed applications do not require the use of more precise bearings. The nylon pulley is press-fit over the bearing, and proper alignment of the cable or cord will avoid undue stress on the pulley and contribute to the longer life of the bearing. | *$3.83 |
| Bearing Mounted Nylon Pulleys UP-2063 1/8" Bore x 3/4" OD x .156" Thickness
Brand: Small Parts Part Number: PNB-2/12-01
Bearing mounted Nylon Pulleys are designed for use with small cables or cords where moderate load and speed applications do not require the use of more precise bearings. The nylon pulley is press-fit over the bearing, and proper alignment of the cable or cord will avoid undue stress on the pulley and contribute to the longer life of the bearing. | *$3.86 |
| Delrin .0816 Pitch 40DP Timing Belt Pulley 1.026" Dia. 1/4" B, For up to 1/4" W Belt
Brand: Small Parts Part Number: 40DP-40/D-01
Double Sided Posi-Drive 40DP Delrin Timing Belt Pulleys .0816 Pitch for Belts up to 1/4 Wide. Material is Grey Delrin. | *$3.87 |
| Delrin .0816 Pitch 40DP Timing Belt Pulley 1.546" Dia. 1/4" B, For up to 1/4" W Belt
Brand: Small Parts Part Number: 40DP-60/D-01
Double Sided Posi-Drive 40DP Delrin Timing Belt Pulleys .0816 Pitch for Belts up to 1/4 Wide. Material is Grey Delrin. | *$4.51 |
| Nylon Glass Filled Timing Belt Pulley Double Flange, 1/5" Pitch, 1/4"B, .891" Pitch Dia.
Brand: Small Parts Part Number: TBPN-14/D-01
These 1/5 inch Pitch (XL) Pulleys are precision molded to match belt configuration and provide accurate register between drive and driven shafts. They are molded of fiberglass-reinforced nylon for light weight, exceptional strength and quiet running characteristics. All hubs are drilled, tapped and supplied with stainless steel set screw. For certainty of attachment, pulleys can be cross drilled and fixed with a bolt or dowel pin. | *$4.55 |
 | Galvanized Steel Lag Bolt, Hex Head, 5/16", 2-1/2" Length (Pack of 10)
Brand: Small Parts Part Number: HLB-HDG018-10
Also known as Lag Bolts, Lag Screws come in longer lengths than wood screws and are easy to tighten with a wrench. brbr Galvanized steel is steel that has been coated with a thin layer of zinc. This zinc layer reacts with oxygen and carbon dioxide in the air to form zinc carbonate, which protects the underlying steel from corrosion. As a result, galvanized steel is commonly used in applications requiring rust resistance, and can be visually identified by the crystallization patterning on the surface. Galvanized steel can be welded, however, one must exercise caution around the resulting zinc fumes. Galvanized steel is suitable for high-temperature applications of up to 392 degrees Fahrenheit (200 degrees Celsius). Use at temperatures above this level will result in peeling of the zinc at the intermetallic layer.brbrHex head fasteners can be driven with simple wrenches, and require minimal clearance above the fastener because they can be driven or loosened from the side. brbr | *$4.74 |
 | Nylon Glass Filled Timing Belt Pulley Double Flange, 1/5" Pitch 3/8" B, .828" Pitch Dia.
Brand: Small Parts Part Number: TBPN6-13/D-01
These 1/5 inch Pitch (XL) Pulleys are precision molded to match belt configuration and provide accurate register between drive and driven shafts. They are molded of fiberglass-reinforced nylon for light weight, exceptional strength and quiet running characteristics. All hubs are drilled, tapped and supplied with stainless steel set screw. For certainty of attachment, pulleys can be cross drilled and fixed with a bolt or dowel pin. | *$4.80 |
| Zinc Plated Steel Lag Bolt, Hex Head, 1/4", 3" Length (Pack of 25)
Brand: Small Parts Part Number: HLB-ZP007-25
Also known as Lag Bolts, Lag Screws come in longer lengths than wood screws and are easy to tighten with a wrench. brbr Steels are designated by a 4 number SAE Steel grade. The first two digits indicate the primary materials used to form the steel. The last 2 digits identify the percentage of carbon for the alloy (in hundredths). The steel used in these fasteners has a tensile strength ranging from 100,000 to 150,000 psi (pounds per square inch). Zinc Plating helps to prevent corrosion.brbrHex head fasteners can be driven with simple wrenches, and require minimal clearance above the fastener because they can be driven or loosened from the side. brbr | *$4.95 |
| Glass Reinforced Nylon V-Belt Pulley 3.5" Diameter 3/8" Bore, For 1/8", 3/16", 1/4" Belt
Brand: Small Parts Part Number: PNG-6-56-01
Glass-reinforced pulleys are especially designed for fractional horsepower drives requiring high strength-to-weight ratios. Glass-reinforced nylon is molded to steel hubs for extra strength. Hubs are drilled, tapped and supplied with stainless steel (10-24) set screws. Hub Diameter: 15/16 inches. Overall Height: 1 inch. | *$6.62 |
| Galvanized Steel Lag Bolt, Hex Head, 1/4", 4" Length (Pack of 25)
Brand: Small Parts Part Number: HLB-HDG008-25
Also known as Lag Bolts, Lag Screws come in longer lengths than wood screws and are easy to tighten with a wrench. brbr Galvanized steel is steel that has been coated with a thin layer of zinc. This zinc layer reacts with oxygen and carbon dioxide in the air to form zinc carbonate, which protects the underlying steel from corrosion. As a result, galvanized steel is commonly used in applications requiring rust resistance, and can be visually identified by the crystallization patterning on the surface. Galvanized steel can be welded, however, one must exercise caution around the resulting zinc fumes. Galvanized steel is suitable for high-temperature applications of up to 392 degrees Fahrenheit (200 degrees Celsius). Use at temperatures above this level will result in peeling of the zinc at the intermetallic layer.brbrHex head fasteners can be driven with simple wrenches, and require minimal clearance above the fastener because they can be driven or loosened from the side. brbr | *$6.81 |
| Galvanized Steel Lag Bolt, Hex Head, 3/8", 2" Length (Pack of 5)
Brand: Small Parts Part Number: HLB-HDG028-05
Also known as Lag Bolts, Lag Screws come in longer lengths than wood screws and are easy to tighten with a wrench. brbr Galvanized steel is steel that has been coated with a thin layer of zinc. This zinc layer reacts with oxygen and carbon dioxide in the air to form zinc carbonate, which protects the underlying steel from corrosion. As a result, galvanized steel is commonly used in applications requiring rust resistance, and can be visually identified by the crystallization patterning on the surface. Galvanized steel can be welded, however, one must exercise caution around the resulting zinc fumes. Galvanized steel is suitable for high-temperature applications of up to 392 degrees Fahrenheit (200 degrees Celsius). Use at temperatures above this level will result in peeling of the zinc at the intermetallic layer.brbrHex head fasteners can be driven with simple wrenches, and require minimal clearance above the fastener because they can be driven or loosened from the side. brbr | *$7.07 |
| Glass Reinforced Nylon V-Belt Pulley 3" Diameter 1/4" Bore, For 1/8", 3/16", 1/4" Belt
Brand: Small Parts Part Number: PNG-4-48-01
Glass-reinforced pulleys are especially designed for fractional horsepower drives requiring high strength-to-weight ratios. Glass-reinforced nylon is molded to steel hubs for extra strength. Hubs are drilled, tapped and supplied with stainless steel (10-24) set screws. Hub Diameter: 15/16 inches. Overall Height: 1 inch. | *$7.08 |
| Glass Reinforced Nylon V-Belt Pulley 2.5" Diameter 1/4" Bore, For 1/8", 3/16", 1/4" Belt
Brand: Small Parts Part Number: PNG-4-40-01
Glass-reinforced pulleys are especially designed for fractional horsepower drives requiring high strength-to-weight ratios. Glass-reinforced nylon is molded to steel hubs for extra strength. Hubs are drilled, tapped and supplied with stainless steel (10-24) set screws. Hub Diameter: 15/16 inches. Overall Height: 1 inch. | *$7.44 |
| Glass Reinforced Nylon V-Belt Pulley 2.5" Diameter 3/8" Bore, For 1/8", 3/16", 1/4" Belt
Brand: Small Parts Part Number: PNG-6-40-01
Glass-reinforced pulleys are especially designed for fractional horsepower drives requiring high strength-to-weight ratios. Glass-reinforced nylon is molded to steel hubs for extra strength. Hubs are drilled, tapped and supplied with stainless steel (10-24) set screws. Hub Diameter: 15/16 inches. Overall Height: 1 inch. | *$7.53 |
| Nylon Glass Filled Timing Belt Pulley Double Flange 1/5" Pitch 3/8" B, 3.056" Pitch Dia.
Brand: Small Parts Part Number: TBPN6-48/D-01
These 1/5 inch Pitch (XL) Pulleys are precision molded to match belt configuration and provide accurate register between drive and driven shafts. They are molded of fiberglass-reinforced nylon for light weight, exceptional strength and quiet running characteristics. All hubs are drilled, tapped and supplied with stainless steel set screw. For certainty of attachment, pulleys can be cross drilled and fixed with a bolt or dowel pin. | *$7.53 |
| Glass Reinforced Nylon V-Belt Pulley 5" Diameter 3/8" Bore, For 1/8", 3/16", 1/4" Belt
Brand: Small Parts Part Number: PNG-6-80-01
Glass-reinforced pulleys are especially designed for fractional horsepower drives requiring high strength-to-weight ratios. Glass-reinforced nylon is molded to steel hubs for extra strength. Hubs are drilled, tapped and supplied with stainless steel (10-24) set screws. Hub Diameter: 15/16 inches. Overall Height: 1 inch. | *$7.65 |
| Glass Reinforced Nylon V-Belt Pulley 4" Diameter 1/4" Bore, For 1/8", 3/16", 1/4" Belt
Brand: Small Parts Part Number: PNG-4-64-01
Glass-reinforced pulleys are especially designed for fractional horsepower drives requiring high strength-to-weight ratios. Glass-reinforced nylon is molded to steel hubs for extra strength. Hubs are drilled, tapped and supplied with stainless steel (10-24) set screws. Hub Diameter: 15/16 inches. Overall Height: 1 inch. | *$8.13 |
| Glass Reinforced Nylon V-Belt Pulley 4" Diameter 3/8" Bore, For 1/8", 3/16", 1/4" Belt
Brand: Small Parts Part Number: PNG-6-64-01
Glass-reinforced pulleys are especially designed for fractional horsepower drives requiring high strength-to-weight ratios. Glass-reinforced nylon is molded to steel hubs for extra strength. Hubs are drilled, tapped and supplied with stainless steel (10-24) set screws. Hub Diameter: 15/16 inches. Overall Height: 1 inch. | *$9.03 |
| Zinc Plated Steel Lag Bolt, Hex Head, 5/16", 2" Length (Pack of 25)
Brand: Small Parts Part Number: HLB-ZP018-25
Also known as Lag Bolts, Lag Screws come in longer lengths than wood screws and are easy to tighten with a wrench. brbr Steels are designated by a 4 number SAE Steel grade. The first two digits indicate the primary materials used to form the steel. The last 2 digits identify the percentage of carbon for the alloy (in hundredths). The steel used in these fasteners has a tensile strength ranging from 100,000 to 150,000 psi (pounds per square inch). Zinc Plating helps to prevent corrosion.brbrHex head fasteners can be driven with simple wrenches, and require minimal clearance above the fastener because they can be driven or loosened from the side. brbr | *$9.07 |
| Acetal Idler Pulley ( For Cable) .500"OD x B Dia. .128" Cable Size Up To 3/64" (Pack of 10)
Brand: Small Parts Part Number: IPD-08-10
Idler pulleys are intended to control cables thourgh directional changes. They are constructed of black Delrin (Acetal) and exhibit high mechanical strength, rigidity, resiliency and have excellent fatigue endurance unmatched by most plastics. | *$9.21 |
 | SmartStraps Padded Deluxe Ratchet Tie-Down - 2in. x 25ft., 10,000Lb. Capacity, Model# 143
Brand: Smart Straps
Breaking Strength (lbs.): 10,000, Working Load (lbs.): 3,333, Strap Width (in.): 2, Strap Length (ft.): 25, Straps (qty.): 1, Fastener Type: J-Hook | *$19.99 |
 | Smart Straps Toggle Ball Bungee Cords - 8-Pc. Set, Model# 110
Brand: Smart Straps
Smart Straps toggle ball bungee cords adjust from 2-12in.L. | *$3.99 |
