 | SHURflo 2088-594-154 115VAC Standard Demand Pump
Brand: SHURflo
shurflo 2088 series 3 chamber-demand pumps offer UL Marine listed, rugged pressure pump that can deliver up to 3.6 GPM from a 12 or 24 Vdc battery pack (self-priming to 9 feet vertical). These are ideal pumps for a cabin, watering project, or a small home system. Features adjustable pressure switch, 30-50 psi. | *$89.99 |
 | Silent Blue with Foil Laminate/Wood Underlayment 200 Sq. Ft. Roll
Brand: Silent Blue Model: 200 sq. ft. roll Part Number: 200 sq. ft. roll
SILENT BLUE Laminate/Wood Underlayment
FREE ROLL OF SILENT BLUE TAPE with each purchase of 400 sq. ft.
You won't find a floating floor underlayment with more sound or moisture control... Even if you pay more!
7 out of 10 new floating floor buyers complain about the hollow sound associated with their floor.
Do not forget to make your new floating floor easy on the ears.
Silent Blue is the only product that uses an independent testing laboratory. The sound rating tests are too expensive for just anyone to pay for, but this ensures that you are getting a pad with real sound deadening qualities. Visit the Silent Blue website, and look for the Test Laboratory link, you will see the original test results.
THE HIGHEST SOUND RATINGS AVAILABLE IN THE U.S.
Weve added metallic foil to one side of this pad, while Silent BlueTM needs no added moisture protection since it is composed of closed cell membranes that can not be penetrated by moisture. Sometimes it tears while being walked on during installations. The rips need to be mended with a polyethylene tape or Silent BlueTM Tape. When this new product is installed with the metallic side down, it becomes very difficult to rip or tear during installation; saving a little time.
Consistent Low Moisture Transfer Ratio - prevents Mold Mildew.
Flexible enough to overcome small subfloor imperfections.
Will not produce hollow sound pockets over most debris.
3 mm Thick / Easy to Handle
Sound Transmission Class (STC)-
Measure of resistance of a building element such as a floor or wall to the passage of audible sounds. The higher the STC number the better the sound barrier.
IIC Rating: 72
STC Rating: 73
Percentage of Sound Insulation: 65%
Water Resistance: Waterproof; water can not penetrate closed cell membranes.
Thickness: 3mm
Roll Width: 3' 6/16'' (1.0M)
Acoustical Floor Underlayment-
For use under Laminate floors and floating wood floors.
HIGHEST SOUND RATINGS IN THE U.S. | *$67.99 |
 | Pergo 36021 Simple Solutions 4-In-1 Molding, American Beech, 78-3/4-Inch x 2-3/8-Inch x 3/4-Inch
Brand: Simple Solutions Model: 36021 | *$34.23 |
 | Pergo 35068 Simple Solutions Stairnose Transition Molding, Craftsman Oak and Rustic Oak
Brand: Simple Solutions Model: 35068 | *$37.55 |
 | Pergo 45405 Sealant for Elegant Expressions American Beech Blocked / Nantucket Pine Laminate Flooring
Brand: Simple Solutions Model: 45405 | *$8.29 |
| Pergo 45407 Sealant for Elegant Expressions Laminate Flooring
Brand: Simple Solutions Model: 45407 | *$8.29 |
| Pergo 45406 Sealant for Elegant Expressions Southport Oak / Rustic Oak / Hudson Oak Laminate Flooring
Brand: Simple Solutions Model: 45406 | *$8.29 |
 | Pergo 45627 1 oz Finishing Putty for Elegant Expressions Rustic Oak Laminate Flooring
Brand: Simple Solutions Model: 45627 | *$9.39 |
| Pergo 45635 1 oz Finishing Putty for Elegant Expressions American Beech Blocked / Southport Oak Laminate Flooring
Brand: Simple Solutions Model: 45635 | *$9.39 |
| Pergo 45631 1 oz Finishing Putty for Elegant Expressions English Black Walnut Laminate Flooring
Brand: Simple Solutions Model: 45631 | *$9.39 |
 | Pergo 45115 Installation Kit for Laminate Flooring
Brand: Simple Solutions Model: 45115 | *$9.95 |
 | SIMPSON DURAVENT 46DVA-HC EXHAUST VENT ACCESSORY 4"
Brand: Simpson Dura-Vent Model: 46DVA-HC Part Number: 46DVA-HC
"SIMPSON DURAVENT" EXHAUST VENT ACCESSORY
For horizontal (through-wall) terminations only. Check installation instructions for restrictions on horizontal cap terminations such as minimum distance from windows and doors.
4"
For Direct vent gas stoves or fireplaces
Square horizontal termination cap
Aluminum finish
Twist lock construction
Exterior laser welded seams
For use with 6-5/8"O.D. direct vent gas appliances vented horizontally. | *$86.99 |
 | 2" Thick Partition Panels - Acoustic Blanket - 4' x 6'
Brand: Singer Safety Part Number: WS-1105 | *$186.20 |
 | Hard Hat Window Mount
Brand: SIPCO Part Number: STR-2 | *$6.50 |
 | Low Profile Pallet Jack
Brand: SJF Material Handling
Engineered for strength, dependability and long life, this is SJF's choice as the #1 pallet jack on the market today. Lo-Profile models feature a lowered fork height of 2 inches.
Lifting - Neutral - Lowering. No foot pedal means extra safety. Neutral allows pumping at the most convenient angle to the operator and free handle movement when the truck is in motion. The handle returns automatically to the vertical position.
NOTE: When shipping to Residential, apartment, dormitories, estates, farms, ranches, rectories, military address, schools, construction sites, mine sites, prisons or other locations not open to walk in service - you will be subject to a LIMITED ACCESS FEE.
Subject to tax in the following states: CA, Fl, IL, IN, MN, TX, WA. | *$277.50 |
 | 3/4" Bench Dogs, Plastic Coated (4)
Brand: Sjobergs Part Number: 33290
SJOBERGS of Sweden has been manufacturing top quality workbenches for over 80 years. Their entire product line of workbenches was designed to meet the needs of a modern day woodworker and to take advantage of the latest manufacturing techniques. The range of features is truly amazing and cannot be matched by any other manufacturer. Four 3/4" plastic steel bench dogs fit Sjobergs Duo and all Nordic Plus Workbenches. | *$41.99 |
 | New 2000 Lb Hand Cable Winch Boat Trailers Auto Marine
Brand: Sky Enterprise USA
You are viewing a Brand New 2000 Lb capacity hand crank winch. Perfect for for lifting or pulling with ease. The ratcheting action keeps the line in place and can be released or tightened with ease. The Zinc plated heavy gauge steel frame ensures a long life. The drop forged, galvanized steel safety-latch hook stays where you put it. The cable is 5/32" X 27 Feet. | *$19.99 |
 | New 5 Ton Come Along Winch Hoist Puller 3 Hook 2 Gear Puller
Brand: Sky Enterprise USA
You are viewing a Brand New 5 Ton Come A Long. This tool is made by Neiko Tools USA. This is the upgraded heavy duty come a long. We guarantee you professional quality or your money back no questions asked.p liBrand New in Retail Packaging liHeavy Duty Steel Construction li3 Hook 2 Gear Design liForged Steel Zinc Plated Hook Gear liThumb control release liDual ratcheting system for heavy duty loads liCable: 6mm thick x 3.6 meters long liHandle: 4.5mm x 54 cm liHook opening: 25 cm liPulling capacity: 10,000 lbs liMade by Neiko Tools USA | *$29.95 |
 | New Pro 1000 Engine Stand Hoist Automotive Tools Lift
Brand: Sky Enterprise USA
You are viewing a Brand New Heavy Duty Engine Stand. This is not the cheap engine stand that you see everyone else selling. We guarantee you the best price on the internet.pulliSupports up to 1000lb engineliRolling casters for easy mobility in the garageliPerfect for storing or working on small blocks!liColor may varyliBrand new and comes in original factory packaging/ul | *$44.99 |
 | New Hydraulic 20 Ton Air Bottle Jack Air Tools Auto Heavy Duty Quality
Brand: Sky Enterprise USA
Capacity 20 Ton Designed for Fast Lifting and Convenient Servicing of Vehicles. Features: Reasonable Structure, Easy operation, Safe and Reliable Use. Operates Manually or With Air. Safety Overload System Prevents Jack From Being Used Beyond its Rated Capacity. Small Dimension, Large Carrying Capacity, High Pressure Resistance Performancep liCapacity: 20 Ton (40000 LBS) liLifting Range: 26-51CM (10-1/4"~201/16") liMin. Height: 26CM (10-1/4") liMax. Height: 51CM (201/16") liAdjustable Height: 8.2CM (3-1/4") liMin. Air Input: 0.7Mpa liMax. Air input : 1.0Mpa liPneumatic Pressure: 120-200 PSI liDesign For Heavy Commercial Use liFast Efficient Air Pump Reduces Lifting Time liHardened Alloy-Palated Ram For Maximum Durability liAir Valve With Integrated Filter, Seales Hydraulic Unit liHeavy-Duty Air Motor Provides Maximum Power p | *$59.90 |
 | NEW DRYWALL STILTS PAINTING STILT ALUMINUM 18-30" BLACK
Brand: Sky Enterprise USA
You are viewing an auction for a Brand New Heavy Duty pair of aluminum drywall stilts. This product will insure great balance, more stability, and of course perfect painting. Never again, worry about getting to those hard to reach places. These are industrial grade drywall stilts. We can guarantee you the best quality or your money back no questions asked!pliBrand new in retail packagingliAttractive black designliHeavy gauge overlapping aluminum leg tubes liLight weight construction for easy motion liParts replaceable to ensure years of safe and continuous use liAdjustable calf brace, metal buckle straps and heel plates for added comfort li3-position heel bracket accommodating different foot sizes and preventing slippage in every direction liLock nuts installed at all crucial pivots and connecting points for greater reliability Safe and comfortable self-locking strap buckles Dual action springs liAdjustable from 18" to 30" (Please checkout our other auctions for size 24"-40")liMultiple colors availableli225lb Load CapacityliMinimal assembly required liReduced price! Save over 50% | *$84.95 |
 | NEW DRYWALL STILTS PAINTING STILT ALUMINUM 24-40" BLACK
Brand: Sky Enterprise USA
You are viewing an auction for a Brand New Heavy Duty pair of aluminum drywall stilts. This product will insure great balance, more stability, and of course perfect painting. Never again, worry about getting to those hard to reach places. These are industrial grade drywall stilts. We can guarantee you the best quality or your money back no questions asked!pliBrand new in retail packagingliAttractive black designliHeavy gauge overlapping aluminum leg tubes liLight weight construction for easy motion liParts replaceable to ensure years of safe and continuous use liAdjustable calf brace, metal buckle straps and heel plates for added comfort li3-position heel bracket accommodating different foot sizes and preventing slippage in every direction liLock nuts installed at all crucial pivots and connecting points for greater reliability Safe and comfortable self-locking strap buckles Dual action springs liAdjustable from 24" to 40" (Please checkout our other auctions for size 18"-30")liMultiple colors availableli225lb Load CapacityliMinimal assembly required liReduced price! Save over 50% | *$89.95 |
 | NEW DRYWALL STILTS PAINTING STILT ALUMINUM 24-40" RED
Brand: Sky Enterprise USA
You are viewing an auction for a Brand New Heavy Duty pair of aluminum drywall stilts. This product will insure great balance, more stability, and of course perfect painting. Never again, worry about getting to those hard to reach places. These are industrial grade drywall stilts. We can guarantee you the best quality or your money back no questions asked!pliBrand new in retail packagingliAttractive red designliHeavy gauge overlapping aluminum leg tubes liLight weight construction for easy motion liParts replaceable to ensure years of safe and continuous use liAdjustable calf brace, metal buckle straps and heel plates for added comfort li3-position heel bracket accommodating different foot sizes and preventing slippage in every direction liLock nuts installed at all crucial pivots and connecting points for greater reliability Safe and comfortable self-locking strap buckles Dual action springs liAdjustable from 24" to 40" (Please checkout our other auctions for size 18"-30")liMultiple colors availableli225lb Load CapacityliMinimal assembly required liReduced price! Save over 50% | *$89.95 |
 | 5 Foot Single Sided Compact Folding Ladder
Brand: SLD S-5 Model: SLD-S5 Part Number: SLD-S5
This is the perfect ladder for those little jobs around the house or office where you don't want to carry in a big heavy ladder. This product closes up to 3 1/2 inches by 3 1/2 inches y 61 inches long | *$76.00 |
 | Prime Line Prod. 16451 Closet Door Floor Guide
Brand: Slide-Co Model: 16451 Part Number: 16451
For use on by pass wardrobe door. Nylon construction for 1 3 8" thick doors. Universal design. 1 per card. | *$1.39 |
 | Prime Line Prod. 17243-B T-Handle Crank
Brand: Slide-Co Model: 17243-B Part Number: 17243-B
T handle crank for window operator. 5 16" hole. Zinc die cast bronze finish. Fastener is included. 1 pair per card. | *$2.28 |
 | SLIDE-CO PL 7955 STORM DOOR PANEL CLIP 3/4" X 1/2"
Brand: Slide-Co Model: PL 7955 Part Number: PL 7955
"SLIDE-CO" STORM DOOR PANEL CLIP
3/4" L x 1/2" W
Self Locking Storm Door Panel Clips With Screws
Mill Finish
8 Pack | *$2.99 |
 | Acetal Idler Pulley 1.25"OD x B Dia. .190", Cable Size Up To 1/16"
Brand: Small Parts Part Number: IPD-20-01
Idler pulleys are intended to control cables thourgh directional changes. They are constructed of black Delrin (Acetal) and exhibit high mechanical strength, rigidity, resiliency and have excellent fatigue endurance unmatched by most plastics. | *$1.50 |
 | Stainless Steel 302 Hitch Pin, Shaft OD Min 1/4" / Max 1/2", 1-5/8" L, 7/64" Hole (Pack of 25)
Brand: Small Parts Part Number: HPX-04-25
Hitch Pins or hairpin cotter pins, these cotter pins are ideal for quick assembly. They're commonly used with clevis pins and shafts. 18-8 stainless steel is more corrosion resistant than zinc-plated steel and may be mildly magnetic. | *$10.14 |
 | Stainless Steel Lag Bolt, Hex Head, 1/4", 3-1/2" Length (Pack of 25)
Brand: Small Parts Part Number: HLB-SS007-25
Also known as Lag Bolts, Lag Screws come in longer lengths than wood screws and are easy to tighten with a wrench. brbr Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness. These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements. The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels.  Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316). Another common naming convention for Austenitic Stainless Steels are 18/8, 18/10, 18/0, etc. where the 18 refers to the % of Chromium and 8 to the % of Nickel contained in the material.   brbrHex head fasteners can be driven with simple wrenches, and require minimal clearance above the fastener because they can be driven or loosened from the side. brbr | *$11.14 |
 | Glass Reinforced Nylon V-Belt Pulley 4.5" Diameter 1/4" Bore, For 1/8", 3/16", 1/4" Belt
Brand: Small Parts Part Number: PNG-4-72-01
Glass-reinforced pulleys are especially designed for fractional horsepower drives requiring high strength-to-weight ratios. Glass-reinforced nylon is molded to steel hubs for extra strength. Hubs are drilled, tapped and supplied with stainless steel (10-24) set screws. Hub Diameter: 15/16 inches. Overall Height: 1 inch. | *$12.00 |
| Stainless Steel Lag Bolt, Hex Head, 5/16", 5" Length (Pack of 10)
Brand: Small Parts Part Number: HLB-SS016-10
Also known as Lag Bolts, Lag Screws come in longer lengths than wood screws and are easy to tighten with a wrench. brbr Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness. These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements. The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels.  Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316). Another common naming convention for Austenitic Stainless Steels are 18/8, 18/10, 18/0, etc. where the 18 refers to the % of Chromium and 8 to the % of Nickel contained in the material.   brbrHex head fasteners can be driven with simple wrenches, and require minimal clearance above the fastener because they can be driven or loosened from the side. brbr | *$14.59 |
 | Zinc Plated Steel Lag Bolt, Hex Head, 3/8", 7" Length (Pack of 25)
Brand: Small Parts Part Number: HLB-ZP040-25
Also known as Lag Bolts, Lag Screws come in longer lengths than wood screws and are easy to tighten with a wrench. brbr Steels are designated by a 4 number SAE Steel grade. The first two digits indicate the primary materials used to form the steel. The last 2 digits identify the percentage of carbon for the alloy (in hundredths). The steel used in these fasteners has a tensile strength ranging from 100,000 to 150,000 psi (pounds per square inch). Zinc Plating helps to prevent corrosion.brbrHex head fasteners can be driven with simple wrenches, and require minimal clearance above the fastener because they can be driven or loosened from the side. brbr | *$16.67 |
 | Delrin 0.0816 Pitch 40DP Timing Belt Pulley 0.870" Dia. 1/4" B, For up to 1/4" Width Belt
Brand: Small Parts Part Number: 40DP-34/S-01
Single Sided Posi-Drive 40DP Delrin Timing Belt Pulleys .0816 Pitch for Belts up to 1/4 Wide. Material is Grey Delrin. | *$2.25 |
| Delrin .0816 Pitch 40DP Timing Belt Pulley .272" Dia. 3/32" B, For up to 1/4" W Belt
Brand: Small Parts Part Number: 40DP-11/D-01
Double Sided Posi-Drive 40DP Delrin Timing Belt Pulleys .0816 Pitch for Belts up to 1/4 Wide. Material is Grey Delrin. | *$2.72 |
| Delrin .0816 Pitch 40DP Timing Belt Pulley .506" Dia. 3/16" B, For up to 1/4" W Belt
Brand: Small Parts Part Number: 40DP-20/D-01
Double Sided Posi-Drive 40DP Delrin Timing Belt Pulleys .0816 Pitch for Belts up to 1/4 Wide. Material is Grey Delrin. | *$2.72 |
 | Nylon Glass Filled Single Flange Timing Belt Pulley 1/5" Pitch, 1/4" B, .955" Pitch Dia.
Brand: Small Parts Part Number: TBPN-15/S-01
These 1/5 inch Pitch (XL) Pulleys are precision molded to match belt configuration and provide accurate register between drive and driven shafts. They are molded of fiberglass-reinforced nylon for light weight, exceptional strength and quiet running characteristics. All hubs are drilled, tapped and supplied with stainless steel set screw. For certainty of attachment, pulleys can be cross drilled and fixed with a bolt or dowel pin. | *$3.27 |
| Delrin .0816 Pitch 40DP Timing Belt Pulley .636" Dia. 1/4" B, For up to 1/4" W Belt
Brand: Small Parts Part Number: 40DP-25/S-01
Single Sided Posi-Drive 40DP Delrin Timing Belt Pulleys .0816 Pitch for Belts up to 1/4 Wide. Material is Grey Delrin. | *$3.50 |
| Acetal Idler Pulley 1.75"OD x B Dia .254", Cable Size Up To 1/8"
Brand: Small Parts Part Number: IPD-28-01
Idler pulleys are intended to control cables thourgh directional changes. They are constructed of black Delrin (Acetal) and exhibit high mechanical strength, rigidity, resiliency and have excellent fatigue endurance unmatched by most plastics. | *$3.50 |
| Delrin .0816 Pitch 40DP Timing Belt Pulley 1.026" Dia. 1/4" B, For up to 1/4" W Belt
Brand: Small Parts Part Number: 40DP-40/D-01
Double Sided Posi-Drive 40DP Delrin Timing Belt Pulleys .0816 Pitch for Belts up to 1/4 Wide. Material is Grey Delrin. | *$3.87 |
 | Lexan Polycarbonate Timing Belt Pulley .489" Diameter 3/16" Bore, For 1/2", 3/4" Belt
Brand: Small Parts Part Number: PLSF-014-01
Single Sided Timing Belt Pulleys .0800 Pitch (MXL) for belts up to 1/4 Wide. Material is PC Lexan. | *$3.96 |
| Glass Reinforced Nylon V-Belt Pulley 6" Diameter 3/8" Bore, For 1/8", 3/16", 1/4" Belt
Brand: Small Parts Part Number: PNG-6-96-01
Glass-reinforced pulleys are especially designed for fractional horsepower drives requiring high strength-to-weight ratios. Glass-reinforced nylon is molded to steel hubs for extra strength. Hubs are drilled, tapped and supplied with stainless steel (10-24) set screws. Hub Diameter: 15/16 inches. Overall Height: 1 inch. | *$34.68 |
| Delrin .0816 Pitch 40DP Timing Belt Pulley 1.546" Dia. 1/4" B, For up to 1/4" W Belt
Brand: Small Parts Part Number: 40DP-60/D-01
Double Sided Posi-Drive 40DP Delrin Timing Belt Pulleys .0816 Pitch for Belts up to 1/4 Wide. Material is Grey Delrin. | *$4.51 |
| Glass Reinforced Nylon V-Belt Pulley 2" Diameter 3/8" Bore, For 1/8", 3/16", 1/4" Belt
Brand: Small Parts Part Number: PNG-6-32-01
Glass-reinforced pulleys are especially designed for fractional horsepower drives requiring high strength-to-weight ratios. Glass-reinforced nylon is molded to steel hubs for extra strength. Hubs are drilled, tapped and supplied with stainless steel (10-24) set screws. Hub Diameter: 15/16 inches. Overall Height: 1 inch. | *$4.53 |
| Nylon Glass Filled Timing Belt Pulley Double Flange, 1/5" Pitch, 1/4"B, .891" Pitch Dia.
Brand: Small Parts Part Number: TBPN-14/D-01
These 1/5 inch Pitch (XL) Pulleys are precision molded to match belt configuration and provide accurate register between drive and driven shafts. They are molded of fiberglass-reinforced nylon for light weight, exceptional strength and quiet running characteristics. All hubs are drilled, tapped and supplied with stainless steel set screw. For certainty of attachment, pulleys can be cross drilled and fixed with a bolt or dowel pin. | *$4.55 |
 | Nylon Glass Filled Timing Belt Pulley Double Flange, 1/5" Pitch 3/8" B, .828" Pitch Dia.
Brand: Small Parts Part Number: TBPN6-13/D-01
These 1/5 inch Pitch (XL) Pulleys are precision molded to match belt configuration and provide accurate register between drive and driven shafts. They are molded of fiberglass-reinforced nylon for light weight, exceptional strength and quiet running characteristics. All hubs are drilled, tapped and supplied with stainless steel set screw. For certainty of attachment, pulleys can be cross drilled and fixed with a bolt or dowel pin. | *$4.80 |
| Zinc Plated Steel Lag Bolt, Hex Head, 1/4", 3" Length (Pack of 25)
Brand: Small Parts Part Number: HLB-ZP007-25
Also known as Lag Bolts, Lag Screws come in longer lengths than wood screws and are easy to tighten with a wrench. brbr Steels are designated by a 4 number SAE Steel grade. The first two digits indicate the primary materials used to form the steel. The last 2 digits identify the percentage of carbon for the alloy (in hundredths). The steel used in these fasteners has a tensile strength ranging from 100,000 to 150,000 psi (pounds per square inch). Zinc Plating helps to prevent corrosion.brbrHex head fasteners can be driven with simple wrenches, and require minimal clearance above the fastener because they can be driven or loosened from the side. brbr | *$4.95 |
| Glass Reinforced Nylon V-Belt Pulley 3.5" Diameter 3/8" Bore, For 1/8", 3/16", 1/4" Belt
Brand: Small Parts Part Number: PNG-6-56-01
Glass-reinforced pulleys are especially designed for fractional horsepower drives requiring high strength-to-weight ratios. Glass-reinforced nylon is molded to steel hubs for extra strength. Hubs are drilled, tapped and supplied with stainless steel (10-24) set screws. Hub Diameter: 15/16 inches. Overall Height: 1 inch. | *$6.62 |
 | Galvanized Steel Lag Bolt, Hex Head, 3/8", 2" Length (Pack of 5)
Brand: Small Parts Part Number: HLB-HDG028-05
Also known as Lag Bolts, Lag Screws come in longer lengths than wood screws and are easy to tighten with a wrench. brbr Galvanized steel is steel that has been coated with a thin layer of zinc. This zinc layer reacts with oxygen and carbon dioxide in the air to form zinc carbonate, which protects the underlying steel from corrosion. As a result, galvanized steel is commonly used in applications requiring rust resistance, and can be visually identified by the crystallization patterning on the surface. Galvanized steel can be welded, however, one must exercise caution around the resulting zinc fumes. Galvanized steel is suitable for high-temperature applications of up to 392 degrees Fahrenheit (200 degrees Celsius). Use at temperatures above this level will result in peeling of the zinc at the intermetallic layer.brbrHex head fasteners can be driven with simple wrenches, and require minimal clearance above the fastener because they can be driven or loosened from the side. brbr | *$7.07 |
| Glass Reinforced Nylon V-Belt Pulley 3" Diameter 1/4" Bore, For 1/8", 3/16", 1/4" Belt
Brand: Small Parts Part Number: PNG-4-48-01
Glass-reinforced pulleys are especially designed for fractional horsepower drives requiring high strength-to-weight ratios. Glass-reinforced nylon is molded to steel hubs for extra strength. Hubs are drilled, tapped and supplied with stainless steel (10-24) set screws. Hub Diameter: 15/16 inches. Overall Height: 1 inch. | *$7.08 |
