 | De-Sta-Co Hydraulic Power Workholding, Block Cylinder, Single Acting, C = 2.998, O = 1/4-20 (1 Each)
Brand: Reid Supply Company Part Number: 090-011-113 | *$224.71 |
| De-Sta-Co Hydraulic Power Workholding, Block Cylinder, Single Acting, C = 2.441, O = 5/16-24 (1 Each)
Brand: Reid Supply Company Part Number: 090-012-221 | *$225.35 |
 | De-Sta-Co Hydraulic Power Workholding, Spring Advance Work Support, Capacity = 1,650 lbs. (1 Each)
Brand: Reid Supply Company Part Number: 040-1-1650 | *$233.52 |
 | De-Sta-Co Hydraulic Power Workholding, Block Cylinder, Double Acting, C = 2.441, O = 5/16-24 (1 Each)
Brand: Reid Supply Company Part Number: 090-022-222 | *$235.49 |
 | Enerpac Hydraulic Power Workholding Clamping Cylinder, Single Action, No. RW-53 (1 Each)
Brand: Reid Supply Company Part Number: RW-53
Used for a wide range of production tooling applications, heavy duty force requirements and high cycle applications. Block shaped clamps provide a high amount of force in a tight area. Designed to be surface mounted on the machine tool bed or on a fixture surface. Provide force in horizontal or vertical direction. Cylindrical clamps have collar threads and base holes for mounting. All have spring return operation for easy unloading of workpiece and faster cycling. Spring is designed to return plunger only." | *$236.00 |
 | De-Sta-Co Hydraulic Power Workholding, Threaded Body Cylinder, Single Acting, D=2.500-16, K=1/2-13 (1 Each)
Brand: Reid Supply Company Part Number: 010-013-334 | *$238.15 |
 | Enerpac Hydraulic Power Workholding Hollow Cylinder, No. RWH-20 (1 Each)
Brand: Reid Supply Company Part Number: RWH-20
These hollow cylinders combine compactness with power and versatility. Any application requiring either a pushing or pulling action is easily handled with this type of cylinder. The cylinders are threaded and can be placed over a bolt or a stud to upgrade most existing manual clamping fixtures. | *$245.00 |
 | De-Sta-Co Hydraulic Power Workholding, Spring Advance Work Support, Capacity = 5,000 lbs. (1 Each)
Brand: Reid Supply Company Part Number: 040-1-5000 | *$248.68 |
| Enerpac Hydraulic Power Workholding Clamping Cylinder, Single Action, No. RW-55 (1 Each)
Brand: Reid Supply Company Part Number: RW-55
Used for a wide range of production tooling applications, heavy duty force requirements and high cycle applications. Block shaped clamps provide a high amount of force in a tight area. Designed to be surface mounted on the machine tool bed or on a fixture surface. Provide force in horizontal or vertical direction. Cylindrical clamps have collar threads and base holes for mounting. All have spring return operation for easy unloading of workpiece and faster cycling. Spring is designed to return plunger only." | *$250.00 |
 | Enerpac Hydraulic Power Workholding Hollow Cylinder, No. CY1254-25 (1 Each)
Brand: Reid Supply Company Part Number: CY1254-25
These hollow cylinders combine compactness with power and versatility. Any application requiring either a pushing or pulling action is easily handled with this type of cylinder. The cylinders are threaded and can be placed over a bolt or a stud to upgrade most existing manual clamping fixtures. | *$260.00 |
 | Enerpac Hydraulic Power Workholding Clamping Cylinder, Single Action, No. RW-102 (1 Each)
Brand: Reid Supply Company Part Number: RW-102
Used for a wide range of production tooling applications, heavy duty force requirements and high cycle applications. Block shaped clamps provide a high amount of force in a tight area. Designed to be surface mounted on the machine tool bed or on a fixture surface. Provide force in horizontal or vertical direction. Cylindrical clamps have collar threads and base holes for mounting. All have spring return operation for easy unloading of workpiece and faster cycling. Spring is designed to return plunger only." | *$274.00 |
| De-Sta-Co Hydraulic Power Workholding, Block Cylinder, Single Acting, C = 3.651, O = 5/16-24 (1 Each)
Brand: Reid Supply Company Part Number: 090-012-224 | *$277.07 |
| De-Sta-Co Hydraulic Power Workholding, Block Cylinder, Double Acting, C = 2.68, O = 1/2-13 (1 Each)
Brand: Reid Supply Company Part Number: 090-023-333 | *$277.62 |
| De-Sta-Co Hydraulic Power Workholding, Block Cylinder, Single Acting, C = 2.68, O = 1/2-13 (1 Each)
Brand: Reid Supply Company Part Number: 090-013-332 | *$279.41 |
 | Enerpac Hydraulic Power Workholding Jam Nut No. JN-48, 1 5/16-16 (1 Each)
Brand: Reid Supply Company Part Number: FN-331 | *$30.50 |
 | Enerpac Hydraulic Power Workholding No. STRS21, Light Duty, Single Acting, Threaded, w/o Arm (1 Each)
Brand: Reid Supply Company Part Number: STRS-21
These swing cylinders rotate 90degrees as they begin their stroke, continuing without rotation for the final clamping stroke. Cylinders can be changed to left swing, right swing or pull applications by loosening the bottom plug. All single acting cylinders come with a retract spring for single-acting operations. Max. psi 5,000. Clamp arms not included but sold separately below. Body styles available are threaded with upper flange or non-threaded with lower or upper flange." | *$301.00 |
 | De-Sta-Co Hydraulic Power Workholding, Threaded Body Swing/Pull Clamp, Swing LH, Double Acting (1 Each)
Brand: Reid Supply Company Part Number: 030-1-D-475 | *$302.37 |
 | De-Sta-Co Hydraulic Power Workholding, Threaded Body Swing/Pull Clamp, Swing LH, Single Acting (1 Each)
Brand: Reid Supply Company Part Number: 030-1-S-475 | *$302.37 |
 | De-Sta-Co Hydraulic Power Workholding, Threaded Body Swing/Pull Clamp, Swing RH, Double Acting (1 Each)
Brand: Reid Supply Company Part Number: 030-1-D-475-R | *$302.37 |
 | De-Sta-Co Hydraulic Power Workholding, Threaded Body Swing/Pull Clamp, Swing RH, Single Acting (1 Each)
Brand: Reid Supply Company Part Number: 030-1-S-475-R | *$302.37 |
 | De-Sta-Co Hydraulic Power Workholding, Swing/Pull Clamp Arm, A = 1.929, B = .709, C = M6 (1 Each)
Brand: Reid Supply Company Part Number: 031-S-475
Custom built arms of any length must clamp to the swing/pull clamp's piston rod in a manner similar to the arms or some derating of the clamp will be necessary. IMPORTANT: Any clamp using a modified or custom arm that is longer or heavier than standard arms must be derated to prevent internal damage. | *$33.09 |
| Enerpac Hydraulic Power Workholding Jam Nut No. JN-12, 1 7/8-16 (1 Each)
Brand: Reid Supply Company Part Number: FN-481 | *$34.00 |
| De-Sta-Co Hydraulic Power Workholding, Threaded Body Swing/Pull Clamp, Swing LH, Single Acting (1 Each)
Brand: Reid Supply Company Part Number: 030-1-S-2400 | *$382.64 |
 | Enerpac Hydraulic Power Workholding No. SLRS51, Light Duty, Single Acting, Lower Flange, w/o Arm (1 Each)
Brand: Reid Supply Company Part Number: SLRS-51
These swing cylinders rotate 90degrees as they begin their stroke, continuing without rotation for the final clamping stroke. Cylinders can be changed to left swing, right swing or pull applications by loosening the bottom plug. All single acting cylinders come with a retract spring for single-acting operations. Max. psi 5,000. Clamp arms not included but sold separately below. Body styles available are threaded with upper flange or non-threaded with lower or upper flange." | *$398.00 |
| Enerpac Hydraulic Power Workholding No. STRS121, Light Duty, Single Acting, Threaded, w/o Arm (1 Each)
Brand: Reid Supply Company Part Number: STRS-121
These swing cylinders rotate 90degrees as they begin their stroke, continuing without rotation for the final clamping stroke. Cylinders can be changed to left swing, right swing or pull applications by loosening the bottom plug. All single acting cylinders come with a retract spring for single-acting operations. Max. psi 5,000. Clamp arms not included but sold separately below. Body styles available are threaded with upper flange or non-threaded with lower or upper flange." | *$398.00 |
 | Enerpac Hydraulic Power Workholding Sequence Valve For Time Interval Control No. WVP-5 (1 Each)
Brand: Reid Supply Company Part Number: WVP-5
These valves can be plumbed to provide a sequence of clamping functions from just one hydraulic power source. Sequenced locating, clamping, and/or supporting functions can be controlled in a logical order by plumbing one sequence valve to each clamping group requiring a different time interval. The valve can be preset to different pressure values, allowing fluid flow in sequence as the hydraulic pressure increases in the entire system to whatever the power source provides, after all valves are open. These valves are basically timers, not pressure controllers. The VE-211 features a lock nut which secures the hydraulic pressure setting for the secondary circuit and a tamper proof cover can be placed over the set screw. Maximum operating pressure is 5,000 psi." | *$406.00 |
 | Enerpac Hydraulic Power Workholding No. SURS51, Light Duty, Single Acting, Upper Flange, w/o Arm (1 Each)
Brand: Reid Supply Company Part Number: SURS-51
These swing cylinders rotate 90degrees as they begin their stroke, continuing without rotation for the final clamping stroke. Cylinders can be changed to left swing, right swing or pull applications by loosening the bottom plug. All single acting cylinders come with a retract spring for single-acting operations. Max. psi 5,000. Clamp arms not included but sold separately below. Body styles available are threaded with upper flange or non-threaded with lower or upper flange." | *$430.00 |
 | Enerpac Hydraulic Power Workholding Swing Cylinder Short Arm No. CAS-51, Use w/cap. = 1,250 lbs. (1 Each)
Brand: Reid Supply Company Part Number: CAS-51
These clamp arms are designed for use with the swing cylinders shown above. Clamp arms can be positioned and tightened without removing the swing cylinder from the fixture. Clamp arm design eliminates the use of a vise when securing to a plunger. Short arms have a tapped hole for buttons and toggle pads. Long arms can be shortened to desired length. | *$44.00 |
| Enerpac Hydraulic Power Workholding Hollow Cylinder, No. CY2754-5 (1 Each)
Brand: Reid Supply Company Part Number: CY2754-5
These hollow cylinders combine compactness with power and versatility. Any application requiring either a pushing or pulling action is easily handled with this type of cylinder. The cylinders are threaded and can be placed over a bolt or a stud to upgrade most existing manual clamping fixtures. | *$443.00 |
| De-Sta-Co Hydraulic Power Workholding, Swing/Pull Clamp Arm, A = 3.959, B = .709, C = None (1 Each)
Brand: Reid Supply Company Part Number: 031-L-475
Custom built arms of any length must clamp to the swing/pull clamp's piston rod in a manner similar to the arms or some derating of the clamp will be necessary. IMPORTANT: Any clamp using a modified or custom arm that is longer or heavier than standard arms must be derated to prevent internal damage. | *$46.96 |
| De-Sta-Co Hydraulic Power Workholding, Swing/Pull Clamp Arm, A = 3.268, B = .866, C = M10 (1 Each)
Brand: Reid Supply Company Part Number: 031-S-2400
Custom built arms of any length must clamp to the swing/pull clamp's piston rod in a manner similar to the arms or some derating of the clamp will be necessary. IMPORTANT: Any clamp using a modified or custom arm that is longer or heavier than standard arms must be derated to prevent internal damage. | *$48.09 |
 | Enerpac Hydraulic Power Workholding Swing Cylinder Long Arm No. CAL-22, Use w/cap. = 500 lbs. (1 Each)
Brand: Reid Supply Company Part Number: CAL-22
These clamp arms are designed for use with the swing cylinders shown above. Clamp arms can be positioned and tightened without removing the swing cylinder from the fixture. Clamp arm design eliminates the use of a vise when securing to a plunger. Short arms have a tapped hole for buttons and toggle pads. Long arms can be shortened to desired length. | *$52.00 |
| Enerpac Hydraulic Power Workholding Swing Cylinder Short Arm No. CAS-121, Use w/cap. = 2,600 lbs. (1 Each)
Brand: Reid Supply Company Part Number: CAS-121
These clamp arms are designed for use with the swing cylinders shown above. Clamp arms can be positioned and tightened without removing the swing cylinder from the fixture. Clamp arm design eliminates the use of a vise when securing to a plunger. Short arms have a tapped hole for buttons and toggle pads. Long arms can be shortened to desired length. | *$53.00 |
| Enerpac Hydraulic Power Workholding Hollow Cylinder, No. RWH-121 (1 Each)
Brand: Reid Supply Company Part Number: RWH-121
These hollow cylinders combine compactness with power and versatility. Any application requiring either a pushing or pulling action is easily handled with this type of cylinder. The cylinders are threaded and can be placed over a bolt or a stud to upgrade most existing manual clamping fixtures. | *$551.00 |
 | Enerpac Hydraulic Power Workholding Low Profile Swing Clamp No. ASC-30, Clamp force = 1,375 lbs. (1 Each)
Brand: Reid Supply Company Part Number: ASC-30
These low profile swing clamps are designed to swing 97degrees to position the arm over the work piece. A vertical plunger then exerts an upward thrust on the back end of the swing arm providing powerful downward pressure to clamp the work piece. Arm can swing right or left. Operating pressure is 1,200 to 2,500 psi." | *$602.00 |
| Enerpac Hydraulic Power Workholding Swing Cylinder Long Arm No. CAL-52, Use w/cap. = 1,250 lbs. (1 Each)
Brand: Reid Supply Company Part Number: CAL-52
These clamp arms are designed for use with the swing cylinders shown above. Clamp arms can be positioned and tightened without removing the swing cylinder from the fixture. Clamp arm design eliminates the use of a vise when securing to a plunger. Short arms have a tapped hole for buttons and toggle pads. Long arms can be shortened to desired length. | *$63.00 |
 | Enerpac Hydraulic Power Workholding Turbo Air/Hydraulic Pump No. PACG-5002SB (1 Each)
Brand: Reid Supply Company Part Number: PACG5002SB
A turbo air pump is recommended where input air pressure is limited. Engineered to recycle exhaust air to help power the pump. Maintains a tight pressure range for reliable clamping performance. Pump will automatically restart in the event of a pressure drop in the hydraulic system. Mounting plate allows for horizontal or vertical machine-side mounting. Buna-N polyurethane and Teflon seals. | *$646.00 |
 | Enerpac Hydraulic Power Workholding Swing Cylinder w/Arm No. SC-1, M = 1 7/8-16 (1 Each)
Brand: Reid Supply Company Part Number: SC-1
These swing cylinders rotate 90degrees as they begin their stroke, continuing without rotation for the final clamping stroke. Cylinders can be changed to left swing, right swing, or pull applications by loosening the side plug and then rotating the plunger to a desired position. The VE-354 and VE-352 have a retract spring for single-acting operations. The VE-360 is only for double-acting operation and has no return spring. Clamp arm provided. Can be mounted with the built-in flange by securing the swinger to the top or bottom of a tooling plate or by screwing the threaded body into a mounting bracket." | *$687.00 |
| Enerpac Hydraulic Power Workholding Turbo Air/Hydraulic Pump No. PACG-3002SB (1 Each)
Brand: Reid Supply Company Part Number: PACG-3002SB
A turbo air pump is recommended where input air pressure is limited. Engineered to recycle exhaust air to help power the pump. Maintains a tight pressure range for reliable clamping performance. Pump will automatically restart in the event of a pressure drop in the hydraulic system. Mounting plate allows for horizontal or vertical machine-side mounting. Buna-N polyurethane and Teflon seals. | *$712.00 |
| De-Sta-Co Hydraulic Power Workholding, Swing/Pull Clamp Arm, A = 7.226, B = .866, C = None (1 Each)
Brand: Reid Supply Company Part Number: 031-L-2400
Custom built arms of any length must clamp to the swing/pull clamp's piston rod in a manner similar to the arms or some derating of the clamp will be necessary. IMPORTANT: Any clamp using a modified or custom arm that is longer or heavier than standard arms must be derated to prevent internal damage. | *$75.59 |
 | Enerpac Hydraulic Power Workholding Single Acting Manifold Cylinder, No. TS-2131ST (1 Each)
Brand: Reid Supply Company Part Number: TS-2131ST
These threaded miniature cylinders were designed specifically for tooling. All cylinders are single-acting with spring return action for rapid work release. They have threaded bodies for all types of mountings. Cylinders may be inserted directly in a fixture or used with standard brackets. Stainless steel construction. Maximum operating pressure 5,000 psi. See our full line catalog for accessories." | *$82.00 |
 | Enerpac Hydraulic Power Workholding Single Acting Manifold Cylinder, No. TS-971ST (1 Each)
Brand: Reid Supply Company Part Number: TS-971ST
These threaded miniature cylinders were designed specifically for tooling. All cylinders are single-acting with spring return action for rapid work release. They have threaded bodies for all types of mountings. Cylinders may be inserted directly in a fixture or used with standard brackets. Stainless steel construction. Maximum operating pressure 5,000 psi. See our full line catalog for accessories." | *$83.00 |
| Enerpac Hydraulic Power Workholding Swing Cylinder Long Arm No. CAL-122, Use w/cap. = 2,600 lbs. (1 Each)
Brand: Reid Supply Company Part Number: CAL-122
These clamp arms are designed for use with the swing cylinders shown above. Clamp arms can be positioned and tightened without removing the swing cylinder from the fixture. Clamp arm design eliminates the use of a vise when securing to a plunger. Short arms have a tapped hole for buttons and toggle pads. Long arms can be shortened to desired length. | *$83.00 |
| Enerpac Hydraulic Power Workholding Single Acting Manifold Cylinder, No. TS-471ST (1 Each)
Brand: Reid Supply Company Part Number: TS-471ST
These threaded miniature cylinders were designed specifically for tooling. All cylinders are single-acting with spring return action for rapid work release. They have threaded bodies for all types of mountings. Cylinders may be inserted directly in a fixture or used with standard brackets. Stainless steel construction. Maximum operating pressure 5,000 psi. See our full line catalog for accessories." | *$89.00 |
 | Enerpac Hydraulic Power Workholding Swing Cylinder w/Arm No. SC-4, M = 3/4-16
Brand: Reid Supply Company Part Number: SC-4
These swing cylinders rotate 90degrees as they begin their stroke, continuing without rotation for the final clamping stroke. Cylinders can be changed to left swing, right swing, or pull applications by loosening the side plug and then rotating the plunger to a desired position. The VE-354 and VE-352 have a retract spring for single-acting operations. The VE-360 is only for double-acting operation and has no return spring. Clamp arm provided. Can be mounted with the built-in flange by securing the swinger to the top or bottom of a tooling plate or by screwing the threaded body into a mounting bracket." | *$9.30 |
| Enerpac Hydraulic Power Workholding Single Acting Manifold Cylinder, No. TS-4191ST (1 Each)
Brand: Reid Supply Company Part Number: TS4191ST
These threaded miniature cylinders were designed specifically for tooling. All cylinders are single-acting with spring return action for rapid work release. They have threaded bodies for all types of mountings. Cylinders may be inserted directly in a fixture or used with standard brackets. Stainless steel construction. Maximum operating pressure 5,000 psi. See our full line catalog for accessories." | *$91.00 |
| Enerpac Hydraulic Power Workholding Single Acting Manifold Cylinder, No. TS-9191ST (1 Each)
Brand: Reid Supply Company Part Number: TS-9191ST
These threaded miniature cylinders were designed specifically for tooling. All cylinders are single-acting with spring return action for rapid work release. They have threaded bodies for all types of mountings. Cylinders may be inserted directly in a fixture or used with standard brackets. Stainless steel construction. Maximum operating pressure 5,000 psi. See our full line catalog for accessories." | *$92.00 |
| Enerpac Hydraulic Power Workholding Swing Cylinder Long Arm No. CAL-202, Use w/cap. = 3,900 lbs. (1 Each)
Brand: Reid Supply Company Part Number: CAL-202
These clamp arms are designed for use with the swing cylinders shown above. Clamp arms can be positioned and tightened without removing the swing cylinder from the fixture. Clamp arm design eliminates the use of a vise when securing to a plunger. Short arms have a tapped hole for buttons and toggle pads. Long arms can be shortened to desired length. | *$97.00 |
 | Heavy-Duty 10-Ton Hydraulic Air - Foot Auxiliary Pump
Brand: RRT
*Heavy-duty pump for porta-power, frame/body straighteners, presses, jacks other hydraulic tools*Fits all standard and long-ram hydraulic equipment; foot-pump or connect to air supply for faster run-up*Operates in all directions for increased versatility and mounting options; reservoir mounting slots *Swivel coupling simplifies connection; 3-position treadle for advance, hold or retract operation*Rugged all-steel construction for long life and easy service; relief valve overload protectionOperates at 70-170 PSI to develop up to 10,000 PSI, maximum output 20,000 lbs. Average air consumption 10 CFM; air inlet 1/4" NPT, includes 6' hydraulic hose with fitting; 21 lbs. Stroke length 1", oil flow at 100 PSI 30 cu in/min; usable oil capacity 42 cu in (690cc). | *$119.90 |
 | 110-Piece Hydraulic Grease Fitting Assortment - Metric
Brand: RRT
*High-quality zinc-coated steel grease zerk fittings for the most-common Metric applications*Includes: 30 straight M6 zerks, 20 90-degree M6 zerks*20 straight M8 zerks, 10 - 90-degree M8 zerks*20 straight M10 zerks, 10 - 90-degree M10 zerks*Complete it clear-view reclosable case to keep all organized, easy to identity. | *$7.67 |
