 | Prince PTO Tractor Pump 11.4 GPM, Model# HC-PTO-2A Brand: Prince Gear-type, heavy-duty pump is designed for PTO drive operation on tractors of all sizes. No additional gearing is required. These pumps feature self-adjusting wear plates that seal off leakage and offset any wear or expansion that may occur during the life of the pump. High tensile aluminum housing, minimum gear clearance, cast iron endplates. Internal splined shafts go all the way through and are supported on both sides by roller bearings. All models have a #16 SAE inlet port and two #12 SAE outlet ports. Include #12 SAE to 3/4in. NPTF female adapter. Reservoir size should at least be as large as the output of the pump. | *$479.99 |
 | Prince PTO Tractor Pump 23 GPM, Model# HC-PTO-3A Brand: Prince Gear-type, heavy-duty pump is designed for PTO drive operation on tractors of all sizes. No additional gearing is required. These pumps feature self-adjusting wear plates that seal off leakage and offset any wear or expansion that may occur during the life of the pump. High tensile aluminum housing, minimum gear clearance, cast iron endplates. Internal splined shafts go all the way through and are supported on both sides by roller bearings. All models have a #16 SAE inlet port and two #12 SAE outlet ports. Include #12 SAE to 3/4in. NPTF female adapter. Reservoir size should at least be as large as the output of the pump. | *$484.99 |
 | Prince Control Valve - Inlet Section, Model# SVI25 Brand: Prince Sectional body hydraulic directional control valves for mobile and industrial hydraulic systems. Use with double-acting cylinders. U.S.A. | *$49.99 |
 | Prince High-Pressure Control Valve, Model# SVE22 Brand: Prince Sectional body hydraulic directional control valves for mobile and industrial hydraulic systems. Use with double-acting cylinders. Power beyond plug capability. U.S.A. | *$49.99 |
 | Prince Adjustable Relief Valve - 1/2in., Model# RD-1850-H Brand: Prince This compact relief valve is adjustable to 2500 PSI. | *$49.99 |
 | Prince Adjustable Relief Valve, 3/4in. Brand: Prince This compact adjustable relief valve is adjustable to 3000 PSI. 20 gallon flow. | *$49.99 |
 | Prince PTO Tractor Pump 40 GPM, Model# HC-P-K11 Brand: Prince At 1000 PSI, direct drive pump delivers 40.1 GPM at 1000 RPM and over 20 GPM at 540 RPM. Pump has roller bearing construction, pressure balanced self-adjusting wear plates and an internally splined drive shaft, 1 3/8in.-21 tooth, so it needs no gear box. Handles pressures up to 2250 PSI. SAE O-ring ports: inlet #20 1 5/8in.-12, drain outlet #16 15/16in.-12, plus auxiliary outlet, #12 11/16in.-12. Includes #20 SAE to 2in. hose adapter and #16 SAE to 1in. female pipe. Easy installation using torque arm restraint. Reservoir size should at least be as large as the output of the pump. U.S.A. | *$499.99 |
 | Prince PTO Tractor Pump 21 GPM, Model# HC-PTO-1A Brand: Prince Part Number: 438-500 Gear-type, heavy-duty pump is designed for PTO drive operation on tractors of all sizes. No additional gearing is required. These pumps feature self-adjusting wear plates that seal off leakage and offset any wear or expansion that may occur during the life of the pump. High tensile aluminum housing, minimum gear clearance, cast iron endplates. Internal splined shafts go all the way through and are supported on both sides by roller bearings. All models have a #16 SAE inlet port and two #12 SAE outlet ports. Include #12 SAE to 3/4in. NPTF female adapter. Reservoir size should at least be as large as the output of the pump. | *$499.99 |
 | Prince Directional Control Valves-Outlet Section Brand: Prince Sectional body hydraulic directional control valves for mobile and industrial hydraulic systems. You can combine 1 to 10 sections per valve bank. Standard features: Load checks on each work port. Hard chrome plated spools, Compact construction to save space. Reversible handle. Extra fine spool metering. Parallel or tandem circuit. Foot mounting. Maximums: 20 GPM; operating temperature 180deg F and 3500 PSI. Power beyond plug and pressure, interchangeable with Gresen V20. | *$59.99 |
 | Prince Control Valve - 4-Way/3-Position Cylinder Spool, Model# SVW1BA1 Brand: Prince Sectional body hydraulic directional control valves for mobile and industrial hydraulic systems. For use with double-acting cylinders. U.S.A. Max. Flow (GPM): 12, Inlet Port (in.): 7/8-14 ORB, Outlet Port (in.): 7/8-14 ORB, Working Port (in.): 3/4-16 ORB,, Max. PSI: 3,000, Directional Control: 4 way, 3 position, Adjustable Release Pressure PSI: 1,500 - 3,000 | *$79.99 |
 | Prince Control Valve - 3 Way/3 Position, Model# SVW1AA1 Brand: Prince Sectional body hydraulic directional control valves for mobile and industrial hydraulic systems. For use with single-acting cylinders. U.S.A. Max. Flow (GPM): 12, Inlet Port (in.): 7/8-14 ORB, 10 SAE, Outlet Port (in.): 7/8-14 ORB, 10 SAE, Working Port (in.): 3/4-16 ORB, 8 SAE, Max. PSI: 3,000, Directional Control: 3 way, 3 position, Adjustable Release Pressure PSI: 1,500 - 3,000 | *$79.99 |
 | Adjustable Flow Control Valve - 3/4in. Port Size Brand: Prince Controls the speed of hydraulic motors. Rated up to 3000 PSI. Rated flow 0-30 GPM. This type of valve will start and stop a hydraulic motor or cylinder and vary the speed over a wide range. Once the speed is set it will remain constant regardless of load variation. Any remaining flow is bypassed to the excess flow port to return to tank or to power another hydraulic function. U.S.A. | *$84.99 |
 | Adjustable Flow Control Valve - 1/2in. Port Size Brand: Prince Controls the speed of hydraulic motors. Rated up to 3000 PSI. Rated flow 0-16 GPM. This type of valve will start and stop a hydraulic motor or cylinder and vary the speed over a wide range. Once the speed is set it will remain constant regardless of load variation. Any remaining flow is bypassed to the excess flow port to return to tank or to power another hydraulic function. U.S.A. | *$84.99 |
 | Prince Control Valve - 4-Way/3-Position, Detent, Model# SVW1BB1 Brand: Prince Sectional body hydraulic directional control valves for mobile and industrial hydraulic systems. For use with double-acting cylinders. U.S.A. Inlet Port (in.): #10 SAE, Working Port (in.): #8 SAE, Max. PSI: 3,000, Max. Flow (GPM): 12, Adjustable Release Pressure PSI: 1,500 - 3,000 | *$89.99 |
 | Prince Directional Control Valves-Inlet Section, Model# 2012H Brand: Prince Sectional body hydraulic directional control valves for mobile and industrial hydraulic systems. You can combine 1 to 10 sections per valve bank. Standard features: Load checks on each work port. Hard chrome plated spools, Compact construction to save space. Reversible handle. Extra fine spool metering. Parallel or tandem circuit. Foot mounting. Maximums: 20 GPM; operating temperature 180deg F and 3500 PSI. Power beyond plug and pressure, interchangeable with Gresen V20. | *$89.99 |
 | Prince Directional Control Valves-Inlet Section, Model# 2012J Brand: Prince Sectional body hydraulic directional control valves for mobile and industrial hydraulic systems. You can combine 1 to 10 sections per valve bank. Standard features: Load checks on each work port. Hard chrome plated spools, Compact construction to save space. Reversible handle. Extra fine spool metering. Parallel or tandem circuit. Foot mounting. Maximums: 20 GPM; operating temperature 180deg F and 3500 PSI. Power beyond plug and pressure, interchangeable with Gresen V20. | *$89.99 |
 | Prince Bolt Kit for 2 Spools Brand: Prince Each kit contains: 3 bolts, 6 nuts and 6 washers. | *$9.99 |
 | Prince Bolt Kit for 4 Spools Brand: Prince Each kit contains: 3 bolts, 6 nuts and 6 washers. | *$9.99 |
 | Priority Flow Divider - 30 GPM Capacity Brand: Prince Divider has adjustable orifice. Rated up to 3000 PSI. Priority flow divider separates one input flow into two output flows. 0-30 GPM capacity. Priority flow is adjustable. One flow is constant and unaffected by input flow variations or load changes. The other port is an excess flow that can provide another circuit. 3/4in. ports. | *$94.99 |
 | Prince Standard 4-Way Control Valve, Model# RD2575T4ESA1 Brand: Prince Up to 20 GPM with 4 ports. Factory pre-set at 1500 PSI, has adjustable relief valve. For lower pressure, turn counter-clockwise. Adjustable from 1000 to 3000 PSI. Precision honed and plated, spools are hydraulically balanced. Spring centered. 3/4in. inlet/outlet ports, 1/2in. work ports. USA | *$99.99 |
 | Prince Motor Spool Open Center Control Valve - 20 GPM, Model# RD-2575-T4-EDA1 Brand: Prince Valve will detent in both directions. Relief valve preset at 1500 PSI; adjustable to 3000 PSI. 3/4in. inlet and outlet, 1/2in. working ports. Motor locks in neutral. Includes motoring spool. 20 GPM flow rate. 3-year limited warranty. U.S.A. | *$99.99 |
 | Prince Two-Way Detent Valve, Model# LS-3010-2 Brand: Prince For open center systems. Two-way detent; 3/4in. in/out 3/4in. work ports. Relief valve adjustable to 2750 PSI, preset at 2250 PSI, flow rating up to 25 GPM. Automatically kicks back to neutral when cylinder completes stroke. Built-in relief valve ports. Hydraulic balanced, hard chrome plated spool. Handle can be installed in up or down position. Detent release pressure adjustable from 600 to 2000 PSI. Warning: using a pressure detent in both directions can be dangerous. USA | *$99.99 |
 | 10 Ton Foot Air / Hydraulic Pump Brand: Rafael Part Number: Lic-FAHP10 ulSpecifications: li Rated Pressure: 10,000 PSI li Air Pressure: 70 - 170 PSI li Stroke Length: 1" li Oil Flow at 100 PSI li Pressure: br 30 Cu.In/Min. at 0 PSI br 8 Cu.In/Min. at 10,000 PSI li Usable Oil Capacity: 42 Cu.In (690 cc) li Air Cunsumption: 10 CFM li Air Inlet: 1/4 NPT br Weight: 22.95 Lbs/ul | *$129.75 |
 | 8 Ton Air/Hydraulic Long Ram Jack - Small Base Brand: Raffael Tools Part Number: Lic AJ8 - Capacity 8 Tonbr - Replacement For 2 Ton Engine Hoistbr - Height: 24-1/5"br - Pick Height: 43-1/2"br - Stroke: 18.9"br - Ram Diameter: 1.4"br - Air Pressure Range: 0.8 - 0.95 Mpabr Weight: 41.25 Lbs | *$106.30 |
 | 10 Ton Hydraulic Porta Power Brand: Raffael Tools Part Number: pp10 ulbr li Color or Model May Very br Contents:br - Hydraulic Pumpbr - Jack Hosebr - 10 Ton Rambr - Spreader Rambr - Extension Tubesbr - Male Connetorbr - Flat Basebr - Wedge Headbr - Spreader Plunger Toebr - Spreader Ram Toebr - Flex Rubber Headbr - Serrated Saddlebr - Blow-Molded Casebr Weight: 75 Lbs/li/ul | *$157.33 |
 | Pull Back Ram for 10 Ton Porta Power - Heavy Duty Brand: Raffael Tools Part Number: pp10-pbr-hd li Stroke: 6" li Material: Steel li Capacity: 10 Ton br Weight: 19.95 Lbs | *$172.09 |
 | Pull Back Ram for 10 Ton Porta Power Brand: Raffael Tools Part Number: pp10-pbr Stroke: 130mmbr Material: Steelbr Capacity: 10 Tonbr Color: Red body with black hookbr Weight: 15 Lbs | *$64.53 |
 | 4 Ton Hydraulic Porta Power Brand: Raffael Tools Part Number: pp4 ulbr li Color or Model May Very br Contents:br - Hydraulic Pumpbr - Jack Hosebr - 4 Ton Rambr - Spreader Rambr - Extension Tubesbr - Male Connetorbr - Flat Basebr - Wedge Headbr - Spreader Plunger Toebr - Spreader Ram Toebr - Flex Rubber Headbr - Serrated Saddlebr - Blow-Molded Casebr Weight: 47 Lbs br Updated on 7/7/2005/li/ul | *$98.07 |
 | RapidAir Union Elbow Fitting - 1/2in., Model# 50300 Brand: RapidAir RapidAir union elbow fitting (along with other RapidAir components, sold separately) enables you to expand your compressed air piping system, putting air lines exactly where you want them. Simply push air compressor tubing into the fitting until seated. Tubing can be removed by pushing on release button. Molded mounting hole makes for clean installation appearance. U.S.A. Fitting Size (in.): 1/2, Degree of Angle ( deg ): 90 | *$3.49 |
 | Red Lion Welded Cylinder - 2500 PSI, 14in. Stroke, Model# 25WC14-150 Brand: Red Lion Excellent for loaders, engine hoists and small boom conveyors. 1 12in. chrome rod, crown piston seals with wear ring, hallite rod seals, cross tube base end and threaded end. Complete with ductile threaded rod clevis, one pin and retaining clips. | *$159.99 |
 | Red Lion Welded Double-Acting Cylinder - 2500 PSI, 36in. Stroke, Model# 25WC36-150 Brand: Red Lion Excellent for loaders, engine hoists and small boom conveyors. 1 1/2in. chrome rod, crown piston seals with wear ring, hallite rod seals, cross tube base end and threaded end. Complete with ductile threaded rod clevis, one pin and retaining clips. | *$229.99 |
 | Parker Metal Bowl Guard Kits, Use w/MFP-357, 358, 359, 361, 362, 363 (1 Kit) Brand: Reid Supply Company Part Number: MFP-511 Metal Bowl Guard Kits | *$10.01 |
| | 2 1/2 Bore x 4. Stroke, Double Acting, Universal Mount, Clippard Stainless Steel Pneumatic Cylinders (1 Each) Brand: Reid Supply Company Part Number: PAC-345 2-1/2" Bore Universal Mount Double Acting | *$100.89 |
 | 2. Bore x 5. Stroke, Double Acting - Rear Pivot Mount, Parker Air Cylinders (1 Each) Brand: Reid Supply Company Part Number: MFP-110 Rear Pivot Mount - Double Acting - MFP-62 through MFP-106 include a mounting nut. | *$102.04 |
 | 1 1/2 Bore x 2. Stroke, Double Acting - Low Profile, Parker Air Cylinders (1 Each) Brand: Reid Supply Company Part Number: MFP-235 Low Profile - Parker low profile cylinders are designed to meet the demands for saving space. The cylinder body is made of heavy wall aluminum alloy. The tube ID coating has extreme hardness, excellent wear, seizure resistance, low coefficient of friction and high corrosion resistance. The piston rod is made of high strength steel, hard chrome plated for smooth performance, and extended seal wear. The piston seal and the piston rod seal are made of Buna-N material for positive sealing. Maximum operating pressure 250 psi with an operating temperature range of -10°F to 165°F. Other sizes are available as special order. Please call for price and delivery. | *$104.61 |
 | 2. Bore x 2. Stroke, Double Acting, Compact, ARO Composite Air Cylinders (1 Each) Brand: Reid Supply Company Part Number: ARO-690 Cylinders are double acting, with a single rod end. Cylinder barrel is made from a unique cross-wound thermo set epoxy. This creates a very strong and lightweight cylinder. The high impact resistance reduces the chances of cylinder failure due to dings or dents. Interior surface is self-lubricating, which insures highly reliable performance and an extended seal life. Cylinder heads are clear anodized aluminum alloy with stainless steel tie bolts. Maximum pressure is 200 psi. Cylinder temperature rating is -25°F to +225°F. | *$105.62 |
 | 3/8 NPT Port, 14 SCFM Flow, 2-120 Spring Range, ARO Precision Air Regulators (1 Each) Brand: Reid Supply Company Part Number: ARO-20 Precision Air Regulators - High precision multi-stage pressure regulators. Controls output pressure with an accuracy of 0.1%, and very low sensitivity to changes in supply pressure and flow. High degree of regulation and repeatability are achievable by reacting to down stream pressure fluctuations as small as 0.01 psi above set pressure. Movement as small as 0.0001 inches will cause main valve to correct to the proper position. At start up, regulated pressure will return to its output setting, even after long down times. Maximum pressure 150 psi. Temperature rating 20°F to 150°F. | *$106.19 |
 | 1/4 NPT Port, 14 SCFM Flow, 2-120 Spring Range, ARO Precision Air Regulators (1 Each) Brand: Reid Supply Company Part Number: ARO-5 Precision Air Regulators - High precision multi-stage pressure regulators. Controls output pressure with an accuracy of 0.1%, and very low sensitivity to changes in supply pressure and flow. High degree of regulation and repeatability are achievable by reacting to down stream pressure fluctuations as small as 0.01 psi above set pressure. Movement as small as 0.0001 inches will cause main valve to correct to the proper position. At start up, regulated pressure will return to its output setting, even after long down times. Maximum pressure 150 psi. Temperature rating 20°F to 150°F. | *$106.19 |
 | 1/4 NPT Port, 14 SCFM Flow, 2-25 Spring Range, ARO Precision Air Regulators (1 Each) Brand: Reid Supply Company Part Number: ARO-15 Precision Air Regulators - High precision multi-stage pressure regulators. Controls output pressure with an accuracy of 0.1%, and very low sensitivity to changes in supply pressure and flow. High degree of regulation and repeatability are achievable by reacting to down stream pressure fluctuations as small as 0.01 psi above set pressure. Movement as small as 0.0001 inches will cause main valve to correct to the proper position. At start up, regulated pressure will return to its output setting, even after long down times. Maximum pressure 150 psi. Temperature rating 20°F to 150°F. | *$106.19 |
 | 1/2 NPT Ports, 1 1/2 Inlet, 16 Port, 2.50 Hex. x 19. Lg., Aluminum Manifolds, Black (1 Each) Brand: Reid Supply Company Part Number: NM-220 Aluminum - Ready to use, no threading required. Positive seal. Use with brass or steel fittings. Hardcoat color anodized finish available in black, blue, or red. Other sizes, hole configurations and colors available as special orders. Please call for price and delivery. Automotive tested approval. Tensile 38,000 psi, yield 35,000 psi. Hardened to T6511. Can withstand pH 4.5. Honed ID. Dipped to remove blemishes and chips. Brackets are sold separately. | *$106.68 |
 | 2. Bore x 6. Stroke, Double Acting - Rear Pivot Mount, Parker Air Cylinders (1 Each) Brand: Reid Supply Company Part Number: MFP-111 Rear Pivot Mount - Double Acting - MFP-62 through MFP-106 include a mounting nut. | *$107.07 |
 | Clevis Mounting Brackets, Use w/Bore Size 2., 2 1/2 (1 Each) Brand: Reid Supply Company Part Number: PAC-760 Clevis Mounting Brackets | *$11.26 |
 | 3/8 NPT, 1.50 OAL, Parker Exhaust Mufflers (1 Each) Brand: Reid Supply Company Part Number: MFP-202 Exhaust Port Mufflers | *$11.67 |
 | 2. Bore x 1. Stroke, Double Acting - Low Profile, Parker Air Cylinders (1 Each) Brand: Reid Supply Company Part Number: MFP-238 Low Profile - Parker low profile cylinders are designed to meet the demands for saving space. The cylinder body is made of heavy wall aluminum alloy. The tube ID coating has extreme hardness, excellent wear, seizure resistance, low coefficient of friction and high corrosion resistance. The piston rod is made of high strength steel, hard chrome plated for smooth performance, and extended seal wear. The piston seal and the piston rod seal are made of Buna-N material for positive sealing. Maximum operating pressure 250 psi with an operating temperature range of -10°F to 165°F. Other sizes are available as special order. Please call for price and delivery. | *$112.30 |
 | Spring Operated, Pedal Style - Two Position, Parker Directional Control Valves (1 Each) Brand: Reid Supply Company Part Number: MFP-392 Pedal Style - Two Position | *$112.93 |
 | 2. Bore x 8. Stroke, Double Acting - Rear Pivot Mount, Parker Air Cylinders (1 Each) Brand: Reid Supply Company Part Number: MFP-113 Rear Pivot Mount - Double Acting - MFP-62 through MFP-106 include a mounting nut. | *$114.67 |
 | Detent Operated / Closed Center, Lever Style - Three Position, Parker Directional Control Valves (1 Each) Brand: Reid Supply Company Part Number: MFP-397 Lever Style - Three Position | *$115.07 |
 | Detent Operated / Exhaust Center, Lever Style - Three Position, Parker Directional Control Valves (1 Each) Brand: Reid Supply Company Part Number: MFP-398 Lever Style - Three Position | *$116.66 |
 | Spring Operated / Closed Center, Lever Style - Three Position, Parker Directional Control Valves (1 Each) Brand: Reid Supply Company Part Number: MFP-395 Lever Style - Three Position | *$116.66 |
 | 2. Bore x 2. Stroke, Double Acting - Low Profile, Parker Air Cylinders (1 Each) Brand: Reid Supply Company Part Number: MFP-239 Low Profile - Parker low profile cylinders are designed to meet the demands for saving space. The cylinder body is made of heavy wall aluminum alloy. The tube ID coating has extreme hardness, excellent wear, seizure resistance, low coefficient of friction and high corrosion resistance. The piston rod is made of high strength steel, hard chrome plated for smooth performance, and extended seal wear. The piston seal and the piston rod seal are made of Buna-N material for positive sealing. Maximum operating pressure 250 psi with an operating temperature range of -10°F to 165°F. Other sizes are available as special order. Please call for price and delivery. | *$119.89 |