 | Prince Welded Tee Cylinder - 2500 PSI, 3in.Bore, 16in. Stroke, 1 1/2in. Shaft, Model# PMC-8316
Brand: Prince
Universal end mountings. A favorite for contractors, industrial, and agricultural applications. All steel welded construction: weld-on cross tube. Heavy wall steel tubing, ground and polished chrome piston rod with pin eye, cast iron piston. O-rings and back up washers, trac-type gland retainer. Maximum working PSI is 2500, bursting PSI is 5000. 2 1/2in. bore cylinders have 3/4in. pin holes. The 3in. and 3 1/2in. bore cylinders have 1in. pin holes. The 4in. bore cylinders have 1 1/4in. pin holes. 2 1/2in. bore cylinders have 3/8in. working ports. The rest have 1/2in. working ports. Double acting. Max. PSI: 2,500, Bore Diameter (in.): 3, Stroke Length (in.): 16, Closed Pin Center (in.): 24, Shaft Diameter (in.): 1 1/2 | *$189.99 |
 | Prince Tie-Rod Cylinder - 3000 PSI, 3 1/2in. Bore, 18in. Stroke, 1 3/8in. Shaft
Brand: Prince
Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 3,000, Bore Diameter (in.): 3 1/2, Stroke Length (in.): 18, Closed Pin Center (in.): 28 1/4, Shaft Diameter (in.): 1 3/8 | *$199.99 |
 | Prince SP20 Series Hydraulic Gear Pump - .976 Cu. In., CCW, Model# SP20B16A9H4-L
Brand: Prince
Compact, lightweight gear pump is built with high-strength aluminum body housing and end covers. Delivers high efficiency and low noise. One-pc. hardened alloy steel gears and driveshaft. Operating pressures up to 3000 PSI. Ideal for material handling, aerial lifts, lawn and turf care, agriculture, construction and other applications. 3-year limited warranty. U.S.A. | *$209.99 |
 | Prince Two-Spool Control Valve, Model# RD522GCGA5A4B1
Brand: Prince
Two spool to 25 GPM. With one standard 4-way port and one float. 3/4in. inlet and outlet ports; 1/2in. working ports. Valve will accept power beyond conversion plug. Internal load check. Relief pressure set at 2000 PSI; adjustable from 1500 PSI to 3000 PSI. Load check for each valve. U.S.A. | *$219.99 |
| Prince Welded Tee Cylinder - 2500 PSI, 3in. Bore, 20in. Stroke, 1 1/2in. Shaft, Model# PMC-8320
Brand: Prince
Universal end mountings. A favorite for contractors, industrial, and agricultural applications. All steel welded construction: weld-on cross tube. Heavy wall steel tubing, ground and polished chrome piston rod with pin eye, cast iron piston. O-rings and back up washers, trac-type gland retainer. Maximum working PSI is 2500, bursting PSI is 5000. 2 1/2in. bore cylinders have 3/4in. pin holes. The 3in. and 3 1/2in. bore cylinders have 1in. pin holes. The 4in. bore cylinders have 1 1/4in. pin holes. 2 1/2in. bore cylinders have 3/8in. working ports. The rest have 1/2in. working ports. Double acting. Max. PSI: 2,500, Bore Diameter (in.): 3, Stroke Length (in.): 20, Closed Pin Center (in.): 28, Shaft Diameter (in.): 1 1/2 | *$219.99 |
| Prince SP20 Series Hydraulic Gear Pump - 1.22 Cu. In., CCW, Model# SP20B20A9H4-L
Brand: Prince
Compact, lightweight gear pump is built with high-strength aluminum body housing and end covers. Delivers high efficiency and low noise. One-pc. hardened alloy steel gears and driveshaft. Operating pressures up to 3000 PSI. Ideal for material handling, aerial lifts, lawn and turf care, agriculture, construction and other applications. 3-year limited warranty. U.S.A. | *$219.99 |
| Prince SP20 Series Hydraulic Gear Pump - 1.22 Cu. In., CW, Model# SP20B20A9H4-R
Brand: Prince
Compact, lightweight gear pump is built with high-strength aluminum body housing and end covers. Delivers high efficiency and low noise. One-pc. hardened alloy steel gears and driveshaft. Operating pressures up to 3000 PSI. Ideal for material handling, aerial lifts, lawn and turf care, agriculture, construction and other applications. 3-year limited warranty. U.S.A. | *$219.99 |
| Prince Welded Tee Cylinder - 2500 PSI, 3 1/2in. Bore, 24in. Stroke, 1 1/2in. Shaft, Model# PMC-5524
Brand: Prince
Universal end mountings. A favorite for contractors, industrial, and agricultural applications. All steel welded construction: weld-on cross tube. Heavy wall steel tubing, ground and polished chrome piston rod with pin eye, cast iron piston. O-rings and back up washers, trac-type gland retainer. Maximum working PSI is 2500, bursting PSI is 5000. 2 1/2in. bore cylinders have 3/4in. pin holes. The 3in. and 3 1/2in. bore cylinders have 1in. pin holes. The 4in. bore cylinders have 1 1/4in. pin holes. 2 1/2in. bore cylinders have 3/8in. working ports. The rest have 1/2in. working ports. Double acting. Max. PSI: 2,500, Bore Diameter (in.): 3 1/2, Stroke Length (in.): 24, Closed Pin Center (in.): 32, Shaft Diameter (in.): 1 1/2 | *$229.97 |
| Prince Tie-Rod Cylinder - 2500 PSI, 4in. Bore, 8in. Stroke, 2in. Shaft
Brand: Prince
Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 2500 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 2,500, Bore Diameter (in.): 4, Stroke Length (in.): 8, Closed Pin Center (in.): 20 1/4, Shaft Diameter (in.): 2 | *$229.99 |
| Prince Tie-Rod Cylinder - 3000 PSI, 3in. Bore, 24in. Stroke, 1 3/8in. Shaft
Brand: Prince
Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 3,000, Bore Diameter (in.): 3, Stroke Length (in.): 24, Closed Pin Center (in.): 34 1/4, Shaft Diameter (in.): 1 3/8 | *$229.99 |
 | Prince Tie-Rod Cylinder - 3000 PSI, 4in. Bore, 10in. Stroke, 1 3/4in. Shaft
Brand: Prince
Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 3,000, Bore Diameter (in.): 4, Stroke Length (in.): 10, Closed Pin Center (in.): 20 1/4, Shaft Diameter (in.): 1 3/4 | *$229.99 |
| Prince Tie-Rod Cylinder - 3000 PSI, 4in. Bore, 12in. Stroke, 1 3/4in. Shaft
Brand: Prince
Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 3,000, Bore Diameter (in.): 4, Stroke Length (in.): 12, Closed Pin Center (in.): 22 1/4, Shaft Diameter (in.): 1 3/4 | *$229.99 |
 | Prince 2-Spool Directional Control Valve, 3000 PSI, Model# RD522CCAA5A4B1
Brand: Prince
Ideal for front-end loaders. Features 3-position, 4-way spools with tandem center. 3000 PSI max. pressure. Nominal flow of 25 GPM. Adjustable relief (1500-3000 PSI). Spring center to neutral from work positions. Work ports are blocked in neutral. Use with open center circuits or closed center with optional closed center plug. | *$239.99 |
| Prince Tie-Rod Cylinder - 3000 PSI, 4in. Bore, 16in. Stroke, 1 3/4in. Shaft
Brand: Prince
Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 3,000, Bore Diameter (in.): 4, Stroke Length (in.): 16, Closed Pin Center (in.): 31 1/4, Shaft Diameter (in.): 1 3/4 | *$249.99 |
 | Prince Welded Tee Cylinder - 2500 PSI, 4in. Bore, 16in. Stroke, 2in. Shaft, Model# PMC-5616
Brand: Prince
Universal end mountings. A favorite for contractors, industrial, and agricultural applications. All steel welded construction: weld-on cross tube. Heavy wall steel tubing, ground and polished chrome piston rod with pin eye, cast iron piston. O-rings and back up washers, trac-type gland retainer. Maximum working PSI is 2500, bursting PSI is 5000. 2 1/2in. bore cylinders have 3/4in. pin holes. The 3in. and 3 1/2in. bore cylinders have 1in. pin holes. The 4in. bore cylinders have 1 1/4in. pin holes. 2 1/2in. bore cylinders have 3/8in. working ports. The rest have 1/2in. working ports. Double acting. Max. PSI: 2,500, Bore Diameter (in.): 4, Stroke Length (in.): 16, Closed Pin Center (in.): 25, Shaft Diameter (in.): 2 | *$249.99 |
| Prince Tie-Rod Cylinder - 3000 PSI, 4in. Bore, 18in. Stroke, 1 3/4in. Shaft
Brand: Prince
Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 3,000, Bore Diameter (in.): 4, Stroke Length (in.): 18, Closed Pin Center (in.): 28 1/4, Shaft Diameter (in.): 1 3/4 | *$249.99 |
| Prince Welded Tee Cylinder - 2500 PSI, 3 1/2in. Bore, 36in. Stroke, 1 1/2in. Shaft, Model# PMC-5536
Brand: Prince
Universal end mountings. A favorite for contractors, industrial, and agricultural applications. All steel welded construction: weld-on cross tube. Heavy wall steel tubing, ground and polished chrome piston rod with pin eye, cast iron piston. O-rings and back up washers, trac-type gland retainer. Maximum working PSI is 2500, bursting PSI is 5000. 2 1/2in. bore cylinders have 3/4in. pin holes. The 3in. and 3 1/2in. bore cylinders have 1in. pin holes. The 4in. bore cylinders have 1 1/4in. pin holes. 2 1/2in. bore cylinders have 3/8in. working ports. The rest have 1/2in. working ports. Double acting. Max. PSI: 2,500, Bore Diameter (in.): 3 1/2, Stroke Length (in.): 36, Closed Pin Center (in.): 44, Shaft Diameter (in.): 1 1/2 | *$259.99 |
 | Prince Heavy Duty Hydraulic Motor - 12 GPM, 2200 PSI, Model# ADM50-4RP
Brand: Prince
For light and medium duty applications. Replacement for Charlynn H, White HS, and Ross TRW MG series. Maximum inlet pressure is 2500 PSI and maximum back pressure is 1000 PSI. Fully reversible, 4-bolt mount with 1in. x 1 3/4in. shaft with 1/4in. keyway. 1/2in. NPTF ports. Orbiting Gerotor Principle. | *$269.99 |
| Prince Tie-Rod Cylinder - 3000 PSI, 5in. Bore, 8in. Stroke, 2in. Shaft
Brand: Prince
Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 3,000, Bore Diameter (in.): 5, Stroke Length (in.): 8, Closed Pin Center (in.): 20 1/4, Shaft Diameter (in.): 2 | *$269.99 |
| Prince Welded Tee Cylinder - 2500 PSI, 3in. Bore, 36in. Stroke, 1 1/2in. Shaft, Model# PMC-8336
Brand: Prince
Universal end mountings. A favorite for contractors, industrial, and agricultural applications. All steel welded construction: weld-on cross tube. Heavy wall steel tubing, ground and polished chrome piston rod with pin eye, cast iron piston. O-rings and back up washers, trac-type gland retainer. Maximum working PSI is 2500, bursting PSI is 5000. 2 1/2in. bore cylinders have 3/4in. pin holes. The 3in. and 3 1/2in. bore cylinders have 1in. pin holes. The 4in. bore cylinders have 1 1/4in. pin holes. 2 1/2in. bore cylinders have 3/8in. working ports. The rest have 1/2in. working ports. Double acting. Max. PSI: 2,500, Bore Diameter (in.): 3, Stroke Length (in.): 36, Closed Pin Center (in.): 44, Shaft Diameter (in.): 1 1/2 | *$269.99 |
| Prince Welded Tee Cylinder - 2500 PSI, 4in. Bore, 20in. Stroke, 2in. Shaft, Model# PMC-5620
Brand: Prince
Universal end mountings. A favorite for contractors, industrial, and agricultural applications. All steel welded construction: weld-on cross tube. Heavy wall steel tubing, ground and polished chrome piston rod with pin eye, cast iron piston. O-rings and back up washers, trac-type gland retainer. Maximum working PSI is 2500, bursting PSI is 5000. 2 1/2in. bore cylinders have 3/4in. pin holes. The 3in. and 3 1/2in. bore cylinders have 1in. pin holes. The 4in. bore cylinders have 1 1/4in. pin holes. 2 1/2in. bore cylinders have 3/8in. working ports. The rest have 1/2in. working ports. Double acting. Max. PSI: 2,500, Bore Diameter (in.): 4, Stroke Length (in.): 20, Closed Pin Center (in.): 29, Shaft Diameter (in.): 2 | *$269.99 |
 | Prince Heavy Duty Hydraulic Motor - 14 GPM, 2000 PSI, Model# ADM100-4RP
Brand: Prince
For light and medium duty applications. Replacement for Charlynn H, White HS, and Ross TRW MG series. Maximum inlet pressure is 2500 PSI and maximum back pressure is 1000 PSI. Fully reversible, 4-bolt mount with 1in. x 1 3/4in. shaft with 1/4in. keyway. 1/2in. NPTF ports. Orbiting Gerotor Principle. | *$279.99 |
| Prince Tie-Rod Cylinder - 3000 PSI, 4in. Bore, 24in. Stroke, 1 3/4in. Shaft
Brand: Prince
Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 3,000, Bore Diameter (in.): 4, Stroke Length (in.): 24, Closed Pin Center (in.): 34 1/4, Shaft Diameter (in.): 1 3/4 | *$289.99 |
| Prince Heavy Duty Hydraulic Motor - 14 GPM, 1800 PSI, Model# ADM200-4RP
Brand: Prince
For light and medium duty applications. Replacement for Charlynn H, White HS, and Ross TRW MG series. Maximum inlet pressure is 2500 PSI and maximum back pressure is 1000 PSI. Fully reversible, 4-bolt mount with 1in. x 1 3/4in. shaft with 1/4in. keyway. 1/2in. NPTF ports. Orbiting Gerotor Principle. | *$299.99 |
| Prince Tie-Rod Cylinder - 3000 PSI, 4in. Bore, 30in. Stroke, 1 3/4in. Shaft
Brand: Prince
Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 3,000, Bore Diameter (in.): 4, Stroke Length (in.): 30, Closed Pin Center (in.): 40 1/4, Shaft Diameter (in.): 1 3/4 | *$299.99 |
| Prince Welded Tee Cylinder - 2500 PSI, 4in. Bore, 30in. Stroke, 2in. Shaft Size, Model# PMC-5630
Brand: Prince
Universal end mountings. A favorite for contractors, industrial, and agricultural applications. All steel welded construction: weld-on cross tube. Heavy wall steel tubing, ground and polished chrome piston rod with pin eye, cast iron piston. O-rings and back up washers, trac-type gland retainer. Maximum working PSI is 2500, bursting PSI is 5000. 2 1/2in. bore cylinders have 3/4in. pin holes. The 3in. and 3 1/2in. bore cylinders have 1in. pin holes. The 4in. bore cylinders have 1 1/4in. pin holes. 2 1/2in. bore cylinders have 3/8in. working ports. The rest have 1/2in. working ports. Double acting. Max. PSI: 2,500, Bore Diameter (in.): 4, Stroke Length (in.): 30, Closed Pin Center (in.): 39, Shaft Diameter (in.): 2 | *$309.99 |
 | Prince 3 Spool Control Valve, Model# HC-V-R21
Brand: Prince
Three spool control valve with float on one spool. Load checks each spool, to 25 GPM. Relief valve preset at 2000 PSI; adjusts from 1500-3000 PSI. Power beyond capacity. 3/4in. inlet/outlet ports, 1/2in. work ports. USA | *$319.99 |
| Prince Tie-Rod Cylinder - 3000 PSI, 4in. Bore, 36in. Stroke, 1 3/4in. Shaft
Brand: Prince
Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 3,000, Bore Diameter (in.): 4, Stroke Length (in.): 36, Closed Pin Center (in.): 46 1/4, Shaft Diameter (in.): 1 3/4 | *$319.99 |
| Prince Welded Tee Cylinder - 2500 PSI, 4in. Bore, 36in. Stroke, 2in. Shaft, Model# PMC-5636
Brand: Prince
Universal end mountings. A favorite for contractors, industrial, and agricultural applications. All steel welded construction: weld-on cross tube. Heavy wall steel tubing, ground and polished chrome piston rod with pin eye, cast iron piston. O-rings and back up washers, trac-type gland retainer. Maximum working PSI is 2500, bursting PSI is 5000. 2 1/2in. bore cylinders have 3/4in. pin holes. The 3in. and 3 1/2in. bore cylinders have 1in. pin holes. The 4in. bore cylinders have 1 1/4in. pin holes. 2 1/2in. bore cylinders have 3/8in. working ports. The rest have 1/2in. working ports. Double acting. Max. PSI: 2,500, Bore Diameter (in.): 4, Stroke Length (in.): 36, Closed Pin Center (in.): 45, Shaft Diameter (in.): 2 | *$319.99 |
| Prince Heavy Duty Hydraulic Motor - 14 GPM, 1600 PSI, Model# ADM300-4RP
Brand: Prince
For light and medium duty applications. Replacement for Charlynn H, White HS, and Ross TRW MG series. Maximum inlet pressure is 2500 PSI and maximum back pressure is 1000 PSI. Fully reversible, 4-bolt mount with 1in. x 1 3/4in. shaft with 1/4in. keyway. 1/2in. NPTF ports. Orbiting Gerotor Principle. | *$329.99 |
| Prince Tie-Rod Cylinder - 3000 PSI, 4 1/2in. Bore, 16in. Stroke, 2in. Shaft
Brand: Prince
Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 3,000, Bore Diameter (in.): 4 1/2, Stroke Length (in.): 16, Closed Pin Center (in.): 31 1/2, Shaft Diameter (in.): 2 | *$329.99 |
| Prince Heavy Duty Hydraulic Motor - 14 GPM, 1300 PSI
Brand: Prince
For light and medium duty applications. Replacement for Charlynn H, White HS, and Ross TRW MG series. Maximum inlet pressure is 2500 PSI and maximum back pressure is 1000 PSI. Fully reversible, 4-bolt mount with 1in. x 1 3/4in. shaft with 1/4in. keyway. 1/2in. NPTF ports. Orbiting Gerotor Principle. | *$339.99 |
| Prince Tie-Rod Cylinder - 3000 PSI, 5in. Bore, 16in. Stroke, 2in. Shaft
Brand: Prince
Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 3,000, Bore Diameter (in.): 5, Stroke Length (in.): 16, Closed Pin Center (in.): 31 1/2, Shaft Diameter (in.): 2 | *$349.99 |
| Prince Tie-Rod Cylinder - 3000 PSI, 5in. Bore, 18in. Stroke, 2in. Shaft
Brand: Prince
Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 3,000, Bore Diameter (in.): 5, Stroke Length (in.): 18, Closed Pin Center (in.): 30 1/4, Shaft Diameter (in.): 2 | *$349.99 |
| Prince Tie-Rod Cylinder - 3000 PSI, 4 1/2 in. Bore, 24in. Stroke, 2in. Shaft
Brand: Prince
Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 3,000, Bore Diameter (in.): 4 1/2, Stroke Length (in.): 24, Closed Pin Center (in.): 36 1/4, Shaft Diameter (in.): 2 | *$359.99 |
| Prince Tie-Rod Cylinder - 3000 PSI, 5in. Bore, 30in. Stroke, 2in. Shaft
Brand: Prince
Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 3,000, Bore Diameter (in.): 5, Stroke Length (in.): 30, Closed Pin Center (in.): 42 1/4, Shaft Diameter (in.): 2 | *$379.99 |
| Prince Tie-Rod Cylinder - 3000 PSI, 5in. Bore, 24in. Stroke, 2in. Shaft
Brand: Prince
Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 3,000, Bore Diameter (in.): 5, Stroke Length (in.): 24, Closed Pin Center (in.): 36 1/4, Shaft Diameter (in.): 2 | *$389.99 |
| Prince Tie-Rod Cylinder - 3000 PSI, 4 1/2 in. Bore, 30in. Stroke, 2in. Shaft
Brand: Prince
Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 3,000, Bore Diameter (in.): 4 1/2, Stroke Length (in.): 30, Closed Pin Center (in.): 42 1/4, Shaft Diameter (in.): 2 | *$389.99 |
 | Prince Standard Outlet End Plate, Model# SVE21
Brand: Prince
Sectional body hydraulic directional control valves for mobile and industrial hydraulic systems. Power beyond plug capability. Use with double-acting cylinders. U.S.A. | *$39.99 |
| Prince Welded Tee Cylinder - 2500 PSI, 4in. Bore, 48in. Stroke, 2in. Shaft Size
Brand: Prince
Universal end mountings. A favorite for contractors, industrial, and agricultural applications. All steel welded construction: weld-on cross tube. Heavy wall steel tubing, ground and polished chrome piston rod with pin eye, cast iron piston. O-rings and back up washers, trac-type gland retainer. Maximum working PSI is 2500, bursting PSI is 5000. 2 1/2in. bore cylinders have 3/4in. pin holes. The 3in. and 3 1/2in. bore cylinders have 1in. pin holes. The 4in. bore cylinders have 1 1/4in. pin holes. 2 1/2in. bore cylinders have 3/8in. working ports. The rest have 1/2in. working ports. Double acting. Max. PSI: 2,500, Bore Diameter (in.): 4, Stroke Length (in.): 48, Closed Pin Center (in.): 58, Shaft Diameter (in.): 2 | *$419.99 |
| Prince Tie-Rod Cylinder - 3000 PSI, 5in. Bore, 36in. Stroke, 2in.Shaft
Brand: Prince
Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 3,000, Bore Diameter (in.): 5, Stroke Length (in.): 36, Closed Pin Center (in.): 48 1/4, Shaft Diameter (in.): 2 | *$419.99 |
 | Prince Hydraulic Hand Pump, 3000 PSI, Model# PM-HP-10B
Brand: Prince
Powerful! Operates a hydraulic press, dump, plow, snowblade, platform, frame straightener or similar equipment. 3 positions: 1) 1.25 cu. in. per stroke @1500 PSI, 2) .95 cu. in per stroke @ 2000 PSI, 3) .60 cu. in. per stroke @3000 PSI. One gallon reservoir. Inlet check valve, release valve. Pressure port 3/8in. NPT. Applied handle force 60-65 lbs. Use on up to 200 cu. inch, single- or double-acting cylinder. 16 1/2in.L. U.S.A. | *$449.99 |
 | Prince PTO Tractor Pump 11.4 GPM, Model# HC-PTO-2A
Brand: Prince
Gear-type, heavy-duty pump is designed for PTO drive operation on tractors of all sizes. No additional gearing is required. These pumps feature self-adjusting wear plates that seal off leakage and offset any wear or expansion that may occur during the life of the pump. High tensile aluminum housing, minimum gear clearance, cast iron endplates. Internal splined shafts go all the way through and are supported on both sides by roller bearings. All models have a #16 SAE inlet port and two #12 SAE outlet ports. Include #12 SAE to 3/4in. NPTF female adapter. Reservoir size should at least be as large as the output of the pump. | *$479.99 |
 | Prince PTO Tractor Pump 23 GPM, Model# HC-PTO-3A
Brand: Prince
Gear-type, heavy-duty pump is designed for PTO drive operation on tractors of all sizes. No additional gearing is required. These pumps feature self-adjusting wear plates that seal off leakage and offset any wear or expansion that may occur during the life of the pump. High tensile aluminum housing, minimum gear clearance, cast iron endplates. Internal splined shafts go all the way through and are supported on both sides by roller bearings. All models have a #16 SAE inlet port and two #12 SAE outlet ports. Include #12 SAE to 3/4in. NPTF female adapter. Reservoir size should at least be as large as the output of the pump. | *$484.99 |
| Prince PTO Tractor Pump 21 GPM, Model# HC-PTO-1A
Brand: Prince
Gear-type, heavy-duty pump is designed for PTO drive operation on tractors of all sizes. No additional gearing is required. These pumps feature self-adjusting wear plates that seal off leakage and offset any wear or expansion that may occur during the life of the pump. High tensile aluminum housing, minimum gear clearance, cast iron endplates. Internal splined shafts go all the way through and are supported on both sides by roller bearings. All models have a #16 SAE inlet port and two #12 SAE outlet ports. Include #12 SAE to 3/4in. NPTF female adapter. Reservoir size should at least be as large as the output of the pump. | *$489.99 |
 | Prince Adjustable Relief Valve - 1/2in., Model# RD-1850-H
Brand: Prince
This compact relief valve is adjustable to 2500 PSI. | *$49.99 |
| Prince Adjustable Relief Valve, 3/4in.
Brand: Prince
This compact adjustable relief valve is adjustable to 3000 PSI. 20 gallon flow. | *$49.99 |
| Prince Control Valve - Inlet Section, Model# SVI25
Brand: Prince
Sectional body hydraulic directional control valves for mobile and industrial hydraulic systems. Use with double-acting cylinders. U.S.A. | *$49.99 |
| Prince High-Pressure Control Valve, Model# SVE22
Brand: Prince
Sectional body hydraulic directional control valves for mobile and industrial hydraulic systems. Use with double-acting cylinders. Power beyond plug capability. U.S.A. | *$49.99 |
 | Prince PTO Tractor Pump 40 GPM, Model# HC-P-K11
Brand: Prince
At 1000 PSI, direct drive pump delivers 40.1 GPM at 1000 RPM and over 20 GPM at 540 RPM. Pump has roller bearing construction, pressure balanced self-adjusting wear plates and an internally splined drive shaft, 1 3/8in.-21 tooth, so it needs no gear box. Handles pressures up to 2250 PSI. SAE O-ring ports: inlet #20 1 5/8in.-12, drain outlet #16 15/16in.-12, plus auxiliary outlet, #12 11/16in.-12. Includes #20 SAE to 2in. hose adapter and #16 SAE to 1in. female pipe. Easy installation using torque arm restraint. Reservoir size should at least be as large as the output of the pump. U.S.A. | *$499.99 |
|
