 | IMPERIAL 192030 "METRIC" PUSH-TO-CONNECT AIR BRAKE FITTING M10x8MM (PACK OF 5)
Brand: Imperial Model: 192030 Part Number: 192030
"IMPERIAL" AIR BRAKE FITTING
Patented design of sizes 6MM ABD above to meet DIN 74324 AND D.O.T. FMVSS 571.106 air brake performance specifications.
Features all brass body and stainless steel tube support.
Working pressure up to 250 PSI.
Working temperature from -40° to +200° Fahrenheit.
8MM tube X M10 X 1.0 metric thread - male connector. | *$82.99 |
 | IMPERIAL 97460 FLUSH FACE HYDRAULIC QUICK COUPLER 3/8" - STEEL
Brand: Imperial Model: 97460 Part Number: 97460
"IMPERIAL" DOUBLE SHUT-OFF HYDRAULIC COUPLER
Seals are made of nitrile.
3000 PSI.
Body Size: 3/8.
Steel Construction.
Female Thread: 3/8. NPTF.
Tomco No.: EC3-21.
Parker No.: FF371-6FP.
Aeroquip No.: FD49-1001-06-06.
Temperature Range: -40° to 225° F.
Referred to as "Dry Seal" type quick couplers.
Heavily plated steel construction.
Shut-off valves in the nipple and coupler.
Conforms to all the requirements of ANSI/HTMA.
Face-guide is designed to simplify hook-up without slip-off.
International interchangeability in application requiring no fluid loss.
Can be used with Flush Face Double Shut-Off Hydraulic Coupler Nipple, Part No. 97461. | *$84.99 |
| IMPERIAL 192031 "METRIC" PUSH-TO-CONNECT AIR BRAKE FITTING M12x8MM (PACK OF 5)
Brand: Imperial Model: 192031 Part Number: 192031
"IMPERIAL" AIR BRAKE FITTING
Patented design of sizes 6MM ABD above to meet DIN 74324 AND D.O.T. FMVSS 571.106 air brake performance specifications.
Features all brass body and stainless steel tube support.
Working pressure up to 250 PSI.
Working temperature from -40° to +200° Fahrenheit.
8MM tube X M12 X 1.5 metric thread - male connector. | *$85.99 |
| | IMPERIAL 90644 BULKHEAD COUPLING 1-1/4"x1/2" (PACK OF 5)
Brand: Imperial Model: 90644 Part Number: 90644
"IMPERIAL" BULKHEAD COUPLING
Bulkhead Coupling.
Typical applications include: grease, instrumentation, and hydraulic systems.
Fair vibration resistance.
Temperature Range: -65° F. to 400°. F.
Material: Carbon steel - AISI/SAE 12L14
Plating: Zinc; yellow dichromate finish
Male Pipe Thread: 1/2"
Female Pipe Thread: 1/4"
Hex Nut Thread: 3/416"
Fixed Hex: 1-1/4"
Inside Diameter: 0.312"
Panel Face To End Length: 1.13"
Overall Length: 2.16" | *$88.47 |
 | IMPERIAL 90767 FLARE ANGLE NEEDLE VALVE 1/4" (PACK OF 5)
Brand: Imperial Model: 90767 Part Number: 90767
"IMPERIAL" NEEDLE VALVE
SAE 45° Flare Angle Needle Valve.
Brass body and steel handle.
Designed for automotive or industrial use. Not intended for natural gas, LPG, nuclear, or aircraft applications.
Temperature Range: -65° F. to 250° F. however, system temperature and type of tubing should be considered.
Pressure Range: 150 psi maximum
Tube Outside Diameter: 3/8"
Pipe Thread: 1/4"
Cross Reference: 330 | *$89.56 |
| IMPERIAL 192034 "METRIC" PUSH-TO-CONNECT AIR BRAKE FITTING M22x8MM (PACK OF 5)
Brand: Imperial Model: 192034 Part Number: 192034
"IMPERIAL" AIR BRAKE FITTING
Patented design of sizes 6MM ABD above to meet DIN 74324 AND D.O.T. FMVSS 571.106 air brake performance specifications.
Features all brass body and stainless steel tube support.
Working pressure up to 250 PSI.
Working temperature from -40° to +200° Fahrenheit.
8MM tube x M22 X 1.5 metric thread - male connector. | *$89.99 |
| IMPERIAL 192033 "METRIC" PUSH-TO-CONNECT AIR BRAKE FITTING M16x8MM (PACK OF 5)
Brand: Imperial Model: 192033 Part Number: 192033
"IMPERIAL" AIR BRAKE FITTING
Patented design of sizes 6MM ABD above to meet DIN 74324 AND D.O.T. FMVSS 571.106 air brake performance specifications.
Features all brass body and stainless steel tube support.
Working pressure up to 250 PSI.
Working temperature from -40° to +200° Fahrenheit.
8MM tube X M16 X 1.5 metric thread - male connector. | *$90.99 |
| IMPERIAL 192028 "METRIC" PUSH-TO-CONNECT AIR BRAKE FITTING M16x6MM (PACK OF 5)
Brand: Imperial Model: 192028 Part Number: 192028
"IMPERIAL" AIR BRAKE FITTING
Patented design of sizes 6MM ABD above to meet DIN 74324 AND D.O.T. FMVSS 571.106 air brake performance specifications.
Features all brass body and stainless steel tube support.
Working pressure up to 250 PSI.
Working temperature from -40° to +200° Fahrenheit.
6MM tube X M16 X 1.5 metric thread - male connector. | *$94.99 |
 | IMPERIAL 97458 DOUBLE SHUT-OFF HYDRAULIC COUPLER 1"
Brand: Imperial Model: 97458 Part Number: 97458
"IMPERIAL" ISO A HYDRAULIC COUPLER
Body Size: 1"
Female Thread: 1" NPTF
Tomco No.: CA5608-36
Parker No.: 6601-16-16
Rated at a working pressure of 4,000 psi.
Temperature Range: -40° to 225° F.
Seals are made of Buna-N material.
Aeroquip No.: 5601-16-16S
Double Shut-Off (ISO "A") Quick Coupler.
Exceeds ISO 7241-1, series "A" specifications.
Shut-off valves on the nipple and coupler.
Interchangeability with other leading manufacturers.
Hose protection is the result of swivel action allowed by the coupler.
Used with Double Shut-Off (ISO "A") Quick Coupler Nipple, Part No. #97457.
Positive alignment and even load distribution provided by the ball-locking mechanism. | *$99.19 |
 | IMPERIAL 91954 #H03932 SUCTION HOSE 2"x2 1/2" - 50' LENGTH
Brand: Imperial Model: 91954 Part Number: 91954
"IMPERIAL" SUCTION HOSE
Hose ID: 2"
Hose OD: 2-1/2"
Hose Length: 50 ft.
Maximum Working pressure: 100 psi
Minimum burst pressure: 400 psi
Minimum bend radius: 12"
Temperature range: -40° F to 212° F
Weatherhead cross reference: H03932
Use with U-Series or 430 U-Series.
Typical application: hydraulic suction hose.
Marine application J1942/1 hydraulic only, ABS and MSHA accepted.
Hose Construction: Inner Tube: nitrile blend,Cover: neoprene,Reinforcement:
3/4" to 1-1/2" - one helical cable wire and one fiber braid.
2" - one helical, straight-stranded wire and one fiber braid. | *$999.99 |
 | DURST INDUSTRIES A970 "JACOBUS MAID-O-MIST" HOT WATER AIR VALVE 1/8" IPS
Brand: JACOBUS MAID-O-MIST Model: A970 Part Number: A970
JACOBUS MAID-O-MIST" HOT WATER AIR VALVE
Size : 1/8" IPS
Automatic hot water air valve | *$6.99 |
 | 15t Capacity. Hydraulicpress w/Pressure (825-331416) Category: Hydraulic Presses
Brand: Jet Part Number: 331416
Item #: 825-331416. pulliCapacity Wt. = 15 tonsliRam Diameter = 2 1/2 inliPiston Stroke = 4 1/2 inliScrew Stroke = 3 1/8 inliTable/Plate Length = 24 3/4 inliTable/Plate Width = 7 1/2 inliVert Table Travel = 22 3/16 inliBase Length = 33 7/8 inliBase Width = 29 1/2 inliWt. = 431 lb/ul brCustomers also search for: Discount 15t Capacity. Hydraulicpress w/Pressure, Buy 15t Capacity. Hydraulicpress w/Pressure, Wholesale 15t Capacity. Hydraulicpress w/Pressure, 662755103810, 331416, Hydraulic Presses | *$1,699.00 |
 | Jet 106200 JHC-200X 2 Ton Hydraulic Shop Crane
Brand: Jet Model: 106200 Part Number: 106200
2 Ton Hydraulic Crane Type: Hydraulic Load Capacity: 4400 | *$472.49 |
 | JET 453313 Hydraulic Jack Only
Brand: Jet Model: 453313 Part Number: 453313
Jacks - Heavy Duty Hyd. Jack-12-1/2" X 6-3/4" X | *$80.99 |
 | Jet Equipment Hyd Body Repair Kit 4 Ton #680014
Brand: Jet Equipment Part Number: 680014
Let hydraulic power make light work of body or collision repairs; Straighten, bend, press or spread steel with this 4-ton capacity models; Quick-connect design allows assembly in seconds; Automatic safety overload system protects equipment; Heavy wall extension tubes for tough jobs; Rugged blow mold case keeps tools organized; Proof tested and certified to meet ASME B30.1 standards | *$185.94 |
 | Jet Equipment Hydraulic Press 35 Ton HP-35A #331431
Brand: Jet Equipment Part Number: 331431
For pressing, bending and straightening operations; Easy-to-use, hand-operated with pressure gauge for direct pressure readings; Tables raise and lower easily with use of hand crank; Side frames are open for inserting long material; Fast setup ram extension screw; Ram moves laterally for added versatility | *$2,999.00 |
 | Lincoln, Guardian Hydraulic Coupler Grease Fittings 1/4"-28, 10 pieces per package, (G630)
Brand: Lincoln
Lincoln grease fittings are used for construction equipment and machine manufacturers. The ball check in the head of the fitting prevents dirt and grit from getting to the bearing. The true spherical contour of the fitting head provides a natural ball and socket joint between the fitting and any commercial hydraulic coupler common to grease guns and grease transfer pump assemblies.
The internal spring on the fittings is tempered with music wire, coiled so that it cannot be compressed to restrict the flow of heavy lubricants, or forced out of the body under normal pressures. The fittings have a specially formed lip at the fitting base that locks the spring and ball securely in place. | *$3.89 |
 | Lincoln, Guardian Hydraulic Coupler Grease Fittings 1/4"-28, 10 pieces per package, (G634)
Brand: Lincoln
Lincoln grease fittings are used for construction equipment and machine manufacturers. The ball check in the head of the fitting prevents dirt and grit from getting to the bearing. The true spherical contour of the fitting head provides a natural ball and socket joint between the fitting and any commercial hydraulic coupler common to grease guns and grease transfer pump assemblies.
The internal spring on the fittings is tempered with music wire, coiled so that it cannot be compressed to restrict the flow of heavy lubricants, or forced out of the body under normal pressures. The fittings have a specially formed lip at the fitting base that locks the spring and ball securely in place. | *$3.89 |
 | Lincoln, Guardian Hydraulic Coupler Grease Fittings 1/4"-28, 10 pieces per package, (G636)
Brand: Lincoln
Lincoln grease fittings are used for construction equipment and machine manufacturers. The ball check in the head of the fitting prevents dirt and grit from getting to the bearing. The true spherical contour of the fitting head provides a natural ball and socket joint between the fitting and any commercial hydraulic coupler common to grease guns and grease transfer pump assemblies.
The internal spring on the fittings is tempered with music wire, coiled so that it cannot be compressed to restrict the flow of heavy lubricants, or forced out of the body under normal pressures. The fittings have a specially formed lip at the fitting base that locks the spring and ball securely in place. | *$3.89 |
 | Lincoln, Guardian Hydraulic Coupler Grease Fittings 1/8"-27, 10 pieces per package, (G631)
Brand: Lincoln
Lincoln grease fittings are used for construction equipment and machine manufacturers. The ball check in the head of the fitting prevents dirt and grit from getting to the bearing. The true spherical contour of the fitting head provides a natural ball and socket joint between the fitting and any commercial hydraulic coupler common to grease guns and grease transfer pump assemblies.
The internal spring on the fittings is tempered with music wire, coiled so that it cannot be compressed to restrict the flow of heavy lubricants, or forced out of the body under normal pressures. The fittings have a specially formed lip at the fitting base that locks the spring and ball securely in place. | *$3.89 |
 | Lincoln, Guardian Hydraulic Coupler Grease Fittings 1/8"-27, 10 pieces per package, (G633)
Brand: Lincoln
Lincoln grease fittings are used for construction equipment and machine manufacturers. The ball check in the head of the fitting prevents dirt and grit from getting to the bearing. The true spherical contour of the fitting head provides a natural ball and socket joint between the fitting and any commercial hydraulic coupler common to grease guns and grease transfer pump assemblies.
The internal spring on the fittings is tempered with music wire, coiled so that it cannot be compressed to restrict the flow of heavy lubricants, or forced out of the body under normal pressures. The fittings have a specially formed lip at the fitting base that locks the spring and ball securely in place. | *$3.89 |
 | Lincoln, Guardian Hydraulic Coupler Grease Fittings 1/8"-27, in package with quantity 10, (G632)
Brand: Lincoln
Lincoln grease fittings are used for construction equipment and machine manufacturers. The ball check in the head of the fitting prevents dirt and grit from getting to the bearing. The true spherical contour of the fitting head provides a natural ball and socket joint between the fitting and any commercial hydraulic coupler common to grease guns and grease transfer pump assemblies.
The internal spring on the fittings is tempered with music wire, coiled so that it cannot be compressed to restrict the flow of heavy lubricants, or forced out of the body under normal pressures. The fittings have a specially formed lip at the fitting base that locks the spring and ball securely in place. | *$3.89 |
 | Lincoln, Guardian Hydraulic Coupler Grease Fittings 3/16" Drive, 10 pieces per package, (G635)
Brand: Lincoln
Lincoln grease fittings are used for construction equipment and machine manufacturers. The ball check in the head of the fitting prevents dirt and grit from getting to the bearing. The true spherical contour of the fitting head provides a natural ball and socket joint between the fitting and any commercial hydraulic coupler common to grease guns and grease transfer pump assemblies.
The internal spring on the fittings is tempered with music wire, coiled so that it cannot be compressed to restrict the flow of heavy lubricants, or forced out of the body under normal pressures. The fittings have a specially formed lip at the fitting base that locks the spring and ball securely in place. | *$3.89 |
 | Lion Heavy-Duty Tie-Rod Hydraulic Cylinder - 2500 PSI, 2in. Bore, 18in. Stroke, Model# 20TL18-112
Brand: Lion 2500
Built tough for agricultural and industrial applications. 2500 PSI model is designed to withstand shock loads of up to 5000 PSI. Durable ductile iron cast components. 90 durometer O-ring seals with anti-extrusion rings for positive sealing throughout the cylinder. High-tensile steel shaft is precision ground, polished and hard chrome-plated. Max. PSI: 2,500, Bore Diameter (in.): 2, Stroke Length (in.): 18, Closed Pin Center (in.): 28 1/4, Shaft Diameter (in.): 1 1/8 | *$109.99 |
| Lion Heavy-Duty Tie-Rod Hydraulic Cylinder - 2500 PSI, 3 1/2in. Bore, 6in. Stroke, Model# 35TL06-125
Brand: Lion 2500
Built tough for agricultural and industrial applications. 2500 PSI model is designed to withstand shock loads of up to 5000 PSI. Durable ductile iron cast components. 90 durometer O-ring seals with anti-extrusion rings for positive sealing throughout the cylinder. High tensile steel shaft is precision ground, polished and hard chrome plated. Max. PSI: 2,500, Bore Diameter (in.): 3 1/2, Stroke Length (in.): 6, Closed Pin Center (in.): 16 1/4, Shaft Diameter (in.): 1 1/4 | *$109.99 |
| Lion Heavy-Duty Tie-Rod Hydraulic Cylinder - 2500 PSI, 3in. Bore, 12in. Stroke, Model# 30TL12-125
Brand: Lion 2500
Built tough for agricultural and industrial applications. 2500 PSI model is designed to withstand shock loads of up to 5000 PSI. Durable ductile iron cast components. 90 durometer O-ring seals with anti-extrusion rings for positive sealing throughout the cylinder. High-tensile steel shaft is precision ground, polished and hard chrome plated. Max. PSI: 2,500, Bore Diameter (in.): 3, Stroke Length (in.): 12, Closed Pin Center (in.): 22 1/4, Shaft Diameter (in.): 1 1/4 | *$109.99 |
 | Lion Double-Acting Tie-Rod Cylinder - 2500 PSI, 2 1/2in. Bore, 16in. Stroke, Model# 25TL16-112
Brand: Lion 2500
Built tough for agricultural and industrial applications. Rated for 2500 PSI continuous working pressure and designed to withstand shock loads of up to 5000 PSI. Durable ductile iron cast components. 90 durometer O-ring seals with anti-extrusion rings for positive sealing throughout the cylinder. High-tensile steel shaft is precision ground, polished and hard chrome plated. 8in. stroke cylinders threaded rods accept adjustable stroke controls. 2in. and 2 1/2in. bore cylinders have 3/8in. working ports; 3in., 3 1/2in. and 4in. bore have 1/2in. working ports. ALL have 1in. pin holes. Max. PSI: 2,500, Bore Diameter (in.): 2 1/2, Stroke Length (in.): 16, Closed Pin Center (in.): 26 1/4, Shaft Diameter (in.): 1 1/8 | *$119.99 |
| Lion Double-Acting Tie-Rod Cylinder - 2500 PSI, 3 1/2in. Bore, 8in. Stroke, Model# 35TL08-125 ASAE
Brand: Lion 2500
Built tough for agricultural and industrial applications. Rated for 2500 PSI continuous working pressure and designed to withstand shock loads of up to 5000 PSI. Durable ductile iron cast components. 90 durometer O-ring seals with anti-extrusion rings for positive sealing throughout the cylinder. High-tensile steel shaft is precision ground, polished and hard chrome plated. 8in. stroke cylinders threaded rods accept adjustable stroke controls. 2in. and 2 1/2in. bore cylinders have 3/8in. working ports; 3in., 3 1/2in. and 4in. bore have 1/2in. working ports. ALL have 1in. pin holes. Max. PSI: 2,500, Bore Diameter (in.): 3 1/2, Stroke Length (in.): 8, Closed Pin Center (in.): 20 1/4, Shaft Diameter (in.): 1 1/4 | *$119.99 |
| Lion Double-Acting Tie-Rod Cylinder - 2500 PSI, 2 1/2in. Bore, 24in. Stroke, Model# 25TL24-125
Brand: Lion 2500
Built tough for agricultural and industrial applications. Rated for 2500 PSI continuous working pressure and designed to withstand shock loads of up to 5000 PSI. Durable ductile iron cast components. 90 durometer O-ring seals with anti-extrusion rings for positive sealing throughout the cylinder. High-tensile steel shaft is precision ground, polished and hard chrome plated. 8in. stroke cylinders threaded rods accept adjustable stroke controls. 2in. and 2 1/2in. bore cylinders have 3/8in. working ports; 3in., 3 1/2in. and 4in. bore have 1/2in. working ports. ALL have 1in. pin holes. Max. PSI: 2,500, Bore Diameter (in.): 2 1/2, Stroke Length (in.): 24, Closed Pin Center (in.): 34 1/4, Shaft Diameter (in.): 1 1/8 | *$129.99 |
| Lion Heavy-Duty Tie Rod Hydraulic Cylinder - 2500 PSI, 2in. Bore, 24in. Stroke, Model# 20TL24-112
Brand: Lion 2500
Built tough for agricultural and industrial applications. 2500 PSI model is designed to withstand shock loads of up to 5000 PSI. Durable ductile iron cast components. 90 durometer O-ring seals with anti-extrusion rings for positive sealing throughout the cylinder. High-tensile steel shaft is precision ground, polished and hard chrome-plated. Max. PSI: 2,500, Bore Diameter (in.): 2, Stroke Length (in.): 24, Closed Pin Center (in.): 34 1/4, Shaft Diameter (in.): 1 1/8 | *$129.99 |
| Lion Heavy-Duty Tie-Rod Hydraulic Cylinder - 2500 PSI 3in. Bore, 18in. Stroke, Model# 30TL18-125
Brand: Lion 2500
Built tough for agricultural and industrial applications. 2500 PSI model is designed to withstand shock loads of up to 5000 PSI. Durable ductile iron cast components. 90 durometer O-ring seals with anti-extrusion rings for positive sealing throughout the cylinder. High-tensile steel shaft is precision ground, polished and hard chrome plated. Max. PSI: 2,500, Bore Diameter (in.): 3, Stroke Length (in.): 18, Closed Pin Center (in.): 28 1/4, Shaft Diameter (in.): 1 1/4 | *$129.99 |
| Lion Heavy-Duty Tie-Rod Hydraulic Cylinder - 2500 PSI, 3 1/2in. Bore, 14in. Stroke, Model# 35TL14-125
Brand: Lion 2500
Built tough for agricultural and industrial applications. 2500 PSI model is designed to withstand shock loads of up to 5000 PSI. Durable ductile iron cast components. 90 durometer O-ring seals with anti-extrusion rings for positive sealing throughout the cylinder. High-tensile steel shaft is precision ground, polished and hard chrome plated. Max. PSI: 2,500, Bore Diameter (in.): 3 1/2, Stroke Length (in.): 14, Closed Pin Center (in.): 24 1/4, Shaft Diameter (in.): 1 1/4 | *$129.99 |
| Lion Heavy-Duty Tie-Rod Hydraulic Cylinder - 2500 PSI, 4in. Bore, 6in. Stroke, Model# 40TL06-125
Brand: Lion 2500
Built tough for agricultural and industrial applications. 2500 PSI model is designed to withstand shock loads of up to 5000 PSI. Durable ductile iron cast components. 90 durometer O-ring seals with anti-extrusion rings for positive sealing throughout the cylinder. High-tensile steel shaft is precision ground, polished and hard chrome plated. Max. PSI: 2,500, Bore Diameter (in.): 4, Stroke Length (in.): 6, Closed Pin Center (in.): 16 1/4, Shaft Diameter (in.): 1 1/4 | *$129.99 |
 | Lion 2500 PSI Heavy-Duty Tie Rod Hydraulic Cylinder - 3 1/2in. Bore, 18in. Stroke, Model# 639189
Brand: Lion 2500
Built tough for agricultural and industrial applications. 2500 PSI model is designed to withstand shock loads of up to 5000 PSI. Durable ductile iron cast components. 90 durometer O-ring seals with antiextrusion rings for positive sealing throughout the cylinder. High tensile steel shaft is precision ground, polished and hard chrome-plated. 2 1/2-year limited warranty. | *$139.99 |
| Lion 2500 PSI Heavy-Duty Tie Rod Hydraulic Cylinder - 4in. Bore, 12in. Stroke, Model# 639201
Brand: Lion 2500
Built tough for agricultural and industrial applications. 2500 PSI model is designed to withstand shock loads of up to 5000 PSI. Durable ductile iron cast components. 90 durometer O-ring seals with antiextrusion rings for positive sealing throughout the cylinder. High tensile steel shaft is precision ground, polished and hard chrome-plated. 2 1/2-year limited warranty. | *$139.99 |
| Lion Heavy-Duty Tie-Rod Hydraulic Cylinder - 2500 PSI, 3in. Bore, 24in. Stroke, Model# 30TL24-150
Brand: Lion 2500
Built tough for agricultural and industrial applications. 2500 PSI model is designed to withstand shock loads of up to 5000 PSI. Durable ductile iron cast components. 90 durometer O-ring seals with anti-extrusion rings for positive sealing throughout the cylinder. High-tensile steel shaft is precision ground, polished and hard chrome plated. Max. PSI: 2,500, Bore Diameter (in.): 3, Stroke Length (in.): 24, Closed Pin Center (in.): 34 1/4, Shaft Diameter (in.): 1 1/2 | *$139.99 |
| Lion Double-Acting Tie-Rod Cylinder - 2500 PSI, 3 1/2in. Bore, 16in. Stroke, Model# 35TL16-125 NON ASAE
Brand: Lion 2500
Built tough for agricultural and industrial applications. Rated for 2500 PSI continuous working pressure and designed to withstand shock loads of up to 5000 PSI. Durable ductile iron cast components. 90 durometer O-ring seals with anti-extrusion rings for positive sealing throughout the cylinder. High-tensile steel shaft is precision ground, polished and hard chrome plated. 8in. stroke cylinders threaded rods accept adjustable stroke controls. 2in. and 2 1/2in. bore cylinders have 3/8in. working ports; 3in., 3 1/2in. and 4in. bore have 1/2in. working ports. ALL have 1in. pin holes. Max. PSI: 2,500, Bore Diameter (in.): 3 1/2, Stroke Length (in.): 16, Closed Pin Center (in.): 26 1/4, Shaft Diameter (in.): 1 1/4 | *$144.99 |
| Lion Heavy-Duty Tie-Rod Hydraulic Cylinder - 2500 PSI, 4in. Bore, 18in. Stroke, Model# 40TL18-150
Brand: Lion 2500
Built tough for agricultural and industrial applications. 2500 PSI model is designed to withstand shock loads of up to 5000 PSI. Durable ductile iron cast components. 90 durometer O-ring seals with anti-extrusion rings for positive sealing throughout the cylinder. High-tensile steel shaft is precision ground, polished and hard chrome plated. Max. PSI: 2,500, Bore Diameter (in.): 4, Stroke Length (in.): 18, Closed Pin Center (in.): 28 1/4, Shaft Diameter (in.): 1 1/2 | *$179.99 |
| Lion Heavy-Duty Tie-Rod Cylinder - 2500 PSI, 4in.Bore, 24in.Stroke, 1 1/2in. Shaft, Model# 40TL24-150
Brand: Lion 2500
Built tough for agricultural and industrial applications. Rated for 2500 PSI continuous working pressure and designed to withstand shock loads of up to 5000 PSI. Durable ductile iron cast components. 90 durometer O-ring seals with anti-extrusion rings for positive sealing throughout the cylinder. High-tensile steel shaft is precision ground, polished and hard chrome plated. 8in. stroke cylinders threaded rods accept adjustable stroke controls. 2in. and 2 1/2in. bore cylinders have 3/8in. working ports; 3in., 3 1/2in. and 4in. bore have 1/2in. working ports. ALL have 1in. pin holes. Max. PSI: 2,500, Bore Diameter (in.): 4, Stroke Length (in.): 24, Closed Pin Center (in.): 34 1/4, Shaft Diameter (in.): 1 1/2 | *$199.99 |
| Lion Heavy-Duty Tie-Rod Hydraulic Cylinder - 2500 PSI, 3 1/2in. Bore, 36in. Stroke, Model# 35TL36-150
Brand: Lion 2500
Built tough for agricultural and industrial applications. 2500 PSI model is designed to withstand shock loads of up to 5000 PSI. Durable ductile iron cast components. 90 durometer O-ring seals with anti-extrusion rings for positive sealing throughout the cylinder. High-tensile steel shaft is precision ground, polished and hard chrome plated. Max. PSI: 2,500, Bore Diameter (in.): 3 1/2, Stroke Length (in.): 36, Closed Pin Center (in.): 46 1/4, Shaft Diameter (in.): 1 1/2 | *$219.99 |
| Lion Heavy-Duty Tie-Rod Hydraulic Cylinder - 2500 PSI, 4in. Bore, 30in. Stroke, Model# 40TL30-200
Brand: Lion 2500
Built tough for agricultural and industrial applications. 2500 PSI model is designed to withstand shock loads of up to 5000 PSI. Durable ductile iron cast components. 90 durometer O-ring seals with anti-extrusion rings for positive sealing throughout the cylinder. High-tensile steel shaft is precision ground, polished and hard chrome-plated. Max. PSI: 2,500, Bore Diameter (in.): 4, Stroke Length (in.): 30, Closed Pin Center (in.): 40 1/4, Shaft Diameter (in.): 2 | *$249.99 |
 | Red Lion Welded Cylinder - 2500 PSI, 24in. Stroke, Model# 40WC24-200
Brand: Lion 2500
2in. chrome rod, crown piston seals with wear ring, hallite rod seals and wear ring, single lug base end and drilled pin rod end. | *$269.99 |
| Lion Heavy-Duty Tie-Rod Hydraulic Cylinder - 2500 PSI, 5in. Bore, 14in. Stroke, Model# 50TL14-200
Brand: Lion 2500
Built tough for agricultural and industrial applications. 2500 PSI model is designed to withstand shock loads of up to 5000 PSI. Durable ductile iron cast components. 90 durometer O-ring seals with anti-extrusion rings for positive sealing throughout the cylinder. High-tensile steel shaft is precision ground, polished and hard chrome plated. Max. PSI: 2,500, Bore Diameter (in.): 5, Stroke Length (in.): 14, Closed Pin Center (in.): 26 1/4, Shaft Diameter (in.): 2 | *$299.99 |
| Lion Heavy-Duty Tie-Rod Hydraulic Cylinder - 2500 PSI, 5in. Bore, 18in. Stroke, Model# 50TL18-200
Brand: Lion 2500
Built tough for agricultural and industrial applications. 2500 PSI model is designed to withstand shock loads of up to 5000 PSI. Durable ductile iron cast components. 90 durometer O-ring seals with anti-extrusion rings for positive sealing throughout the cylinder. High -tensile steel shaft is precision ground, polished and hard chrome plated. Max. PSI: 2,500, Bore Diameter (in.): 5, Stroke Length (in.): 18, Closed Pin Center (in.): 30 1/4, Shaft Diameter (in.): 2 | *$329.99 |
| Lion Heavy-Duty Tie-Rod Hydraulic Cylinder - 2500 PSI, 5in. Bore, 24in. Stroke, Model# 50TL24-200
Brand: Lion 2500
Built tough for agricultural and industrial applications. 2500 PSI model is designed to withstand shock loads of up to 5000 PSI. Durable ductile iron cast components. 90 durometer O-ring seals with anti-extrusion rings for positive sealing throughout the cylinder. High tensile steel shaft is precision ground, polished and hard chrome-plated. Max. PSI: 2,500, Bore Diameter (in.): 5, Stroke Length (in.): 24, Closed Pin Center (in.): 36 1/4, Shaft Diameter (in.): 2 | *$379.99 |
| Lion Heavy-Duty Tie-Rod Hydraulic Cylinder - 2500 PSI, 5in. Bore, 36in. Stroke, Model# 50TL36-200
Brand: Lion 2500
Built tough for agricultural and industrial applications. 2500 PSI model is designed to withstand shock loads of up to 5000 PSI. Durable ductile iron cast components. 90 durometer O-ring seals with anti-extrusion rings for positive sealing throughout the cylinder. High-tensile steel shaft is precision ground, polished and hard chrome plated. Max. PSI: 2,500, Bore Diameter (in.): 5, Stroke Length (in.): 36, Closed Pin Center (in.): 48 1/4, Shaft Diameter (in.): 2 | *$409.99 |
| Lion Heavy-Duty Tie-Rod Hydraulic Cylinder - 2500 PSI, 2in. Bore, 6in. Stroke, Model# 30TL06-112
Brand: Lion 2500
Built tough for agricultural and industrial applications. 2500 PSI model is designed to withstand shock loads of up to 5000 PSI. Durable ductile iron cast components. 90 durometer O-ring piston and barrel seals with anti-extrusion rings, polyurethane U-cup rod seal and heavy-duty rod wiper provide positive sealing throughout the cylinder. High tensile steel shaft is precision ground, polished and hard chrome-plated. Max. PSI: 2,500, Bore Diameter (in.): 2, Stroke Length (in.): 6, Closed Pin Center (in.): 16 1/4, Shaft Diameter (in.): 1 1/8 | *$79.99 |
| Lion Tie-Rod Cylinder - 2500 PSI, 2in.Bore, 8in. Stroke, 1 1/8in. Shaft, Model# 20TL08-112 ASAE
Brand: Lion 2500
Built tough for agricultural and industrial applications. Rated for 2500 PSI continuous working pressure and designed to withstand shock loads of up to 5000 PSI. Durable ductile iron cast components. 90 durometer O-ring seals with anti-extrusion rings for positive sealing throughout the cylinder. High-tensile steel shaft is precision-ground, polished and hard chrome-plated. 8in. stroke cylinders threaded rods accept adjustable stroke controls. 2in. and 2 1/2in. bore cylinders have 3/8in. working ports; 3in., 3 1/2in. and 4in. bore have 1/2in. working ports. ALL have 1in. pin holes. Max. PSI: 2,500, Bore Diameter (in.): 2, Stroke Length (in.): 8, Closed Pin Center (in.): 20 1/4, Shaft Diameter (in.): 1 1/8 | *$84.99 |
| Lion Double Acting Tie-Rod Cylinder - 2500 PSI, 2 1/2in. Bore, 8in. Stroke, Model# 25TL08-112 ASAE
Brand: Lion 2500
Built tough for agricultural and industrial applications. Rated for 2500 PSI continuous working pressure and designed to withstand shock loads of up to 5000 PSI. Durable ductile iron cast components. 90 durometer O-ring seals with anti-extrusion rings for positive sealing throughout the cylinder. High-tensile steel shaft is precision ground, polished and hard chrome plated. 8in. stroke cylinders threaded rods accept adjustable stroke controls. 2in. and 2 1/2in. bore cylinders have 3/8in. working ports; 3in., 3 1/2in. and 4in. bore have 1/2in. working ports. ALL have 1in. pin holes. Max. PSI: 2,500, Bore Diameter (in.): 2 1/2, Stroke Length (in.): 8, Closed Pin Center (in.): 20 1/4, Shaft Diameter (in.): 1 1/8 | *$89.99 |
| Lion Heavy-Duty Tie-Rod Hydraulic Cylinder - 2500 PSI, 2in. Bore, 10in. Stroke, Model# 20TL10-112
Brand: Lion 2500
Built tough for agricultural and industrial applications. 2500 PSI model is designed to withstand shock loads of up to 5000 PSI. Durable ductile iron cast components. 90 durometer O-ring seals with antiextrusion rings for positive sealing throughout the cylinder. High tensile steel shaft is precision ground, polished and hard chrome-plated. Max. PSI: 2,500, Bore Diameter (in.): 2, Stroke Length (in.): 10, Closed Pin Center (in.): 20 1/4, Shaft Diameter (in.): 1 1/8 | *$89.99 |
|
