 | Hydraulic Hose Fitting, 1/2"
Brand: Gates Part Number: G251700806
Gates G25170-0806 MEGACRIMP COUPLI | *$5.78 |
 | Hydraulic Hose Fitting, 1/4"
Brand: Gates Part Number: G252300404
Gates G25230-0404 MEGACRIMP COUPLI | *$6.49 |
 | Hydraulic Hose Fitting, 3/8"
Brand: Gates Model: G251790608 Part Number: G251790608
Gates G25179-0608 MEGACRIMP COUPLI | *$7.30 |
 | Gates G251100404 4g-4fp Hydraulic Hose Fitting
Brand: Gates Model: G251100404 Part Number: G251100404
"GATES" HYDRAULIC HOSE FITTINGS
Coupling
Hose i.d - 1/4"
Thread size: 1/4 - 18
Nptf or npsf solid female
Without 30 degree cone seat | *$7.59 |
 | Hydraulic Hose Fitting, 3/4"
Brand: Gates Model: G251701216 Part Number: G251701216
12G16FJX | *$8.20 |
 | Gates G255000404 "Megacrimp - G25 Series" 4g-4mix Hydraulic Hose Fitting
Brand: Gates Model: G255000404
COUPLING
MALE INVERTED SWIVEL
Brand:"MEGACRIMP - G25 SERIES"
Thread Size: 7/16 - 24
Hose I.D. Ins.=1/4 | *$8.79 |
 | Hydraulic Hose Fitting, 3/8"
Brand: Gates Part Number: G251750608
Gates G25175-0608 MEGACRIMP COUPLI | *$9.44 |
 | Hydraulic Hose Fitting, 3/8"
Brand: Gates Model: G252400606 Part Number: G252400606
Gates G25240-0606 MEGACRIMP COUPLI | *$9.79 |
 | Hydraulic Hose, 1/4" x 50'
Brand: Gates Model: 86621 Part Number: 86621
Recommended for high pressure hydraulic oil lines. Meets or exceeds the requirements of SAE 100R2AT and SAE 100R2 Type S and performance requirements of EN 853 2SN. | *$99.97 |
 | 12 Ton Hydraulic Shop Press
Brand: Generic
-Powered by a strong 12-ton hydraulic bottle jack.
-Remove and install bearings, gears, U-joints, bushings, ball joints, pulleys, etc. Open side heavy duty construction allow work on the longest work pieces. Raise and lower table for the best working distance possible. Spring return ram speed up your work. Get tremendous pressure with very little effort for all your arbor and press out jobs. | *$119.00 |
 | 4 Ton Hydraulic Shop Press Floor Bench Top Range 0-13"
Brand: Generic | *$147.99 |
 | 2-10 TON Air Hydraulic Cylinder RAM Portable 11 Pc Set
Brand: generic
-Hydraulic Cylinders Kit Includes:
-2 Ton-76mm Stroke, min. Height: 139mm
-2 Ton-128mm Stroke, min. Height: 409mm
-4 Ton-16mm Stroke, min. Height: 42mm
-4 Ton-132mm Stroke, min. Height: 276mm
-5 Ton-130mm Stroke, min. Height: 483mm
-10 Ton-60mm Stroke, min. Height: 118mm
-10 Ton-150mm Stroke, min. Height: 350mm
-Pullback Rams:
Pro-Line Trading Corp.
1706 Potrero Ave.
South El Monte, CA 91733 | *$179.99 |
 | 20 Ton RAM BODY FRAME Repair Hydraulic Porta Power
Brand: Generic
This item includes:
-Wrench
-Base
-4-3/4" Ram Toe
-V-Base
-Wedge Toe
-Plunger Toe
-5" Connective Tube
-10" Connective Tube
-2-1/2" Joint Connector Tube x 3 PCS
-3" Connective Tube x 3 PCS
-20" Connective Tube
-27" Connective Tube
-2 Storage Cases
DONT WANT TO PAY FOR SHIPPING and live in Southern California? This item is available for pick up!!! Email us at Prolinetrading@sbcglobal.net and ask how?! | *$389.99 |
 | Polypropylene Rotary Pump For Water Based Solutions
Brand: Global Industrial Part Number: 10211
Polypropylene Rotary Drum Pump Polypropylene construction with ryton vanes, viton oil seal and polyethylene gaskets. Used for water based solutions of detergents, waxes, alkalis and salts. Dispenses 8 oz. per revolution. Includes 2" bung adapter, 3 piece 1-14"dia. x 44"L suction tube with strainer and rotating 1" discharge spout. | *$54.95 |
 | Piston Pump Detergents-Waxes-Water Solubles
Brand: Global Industrial Part Number: 6008
Piston Pump Choose the piston pump that will handle the harshness of the liquid you need pumped. This polypropylene model should be used with water based fluids, light oils, mild acids, corrosive soaps. Fits a 2" or 3/4" IPS female opening. Adjust dispense rate to 25, 50 or 75% of pump volume. Comes with a handy 5 gallon pail adapter. Fits 5, 15, 30 ; 55 gallon drums. Discharge spout rotates 360 . 17.00 L. 3.00 W. 3.00 H. | *$9.00 |
 | Electric Hydraulic Pumps Model Code: AC (part# 975)
Brand: Greenlee Part Number: 975
975 Model Code: AC (part# 975) This item features: -Automatic or manual ram selector valve. -Low voltage pendant coupled to solid state motor controls eliminates contact arcing. -Pendant advance control. -Molded enclosure protects pump, motor, and circuitry. -For use with single hose hydraulic systems with spring return rams. -Handy pendant advance control. -Low voltage pendant coupled to solid state motor controls eliminates contact arcing for greater reliability and longer life. -Automatic or manual ram return selector valve provides more control from the pendant switch. -Molded enclosure protects pump, motor and circuitry in tough working environments. -Use with single hose hydraulic systems with spring return rams. -Operating Pressure: 10000.0 psi [Max]. -Length: 12 in. -Price is for 1 Each. Model Code  Model Description AAUsed With:All Greenlee Benders, Flow:4.8 mL/h [Max], Flow @ Pressure:0.90 L/min @ 10000 psi, Power Cap.:1 1/2 hp [Max], Voltage:120.00 VAC, Frequency:60.0 Hz, Width:12 in, Height:17 1/2 in, Type:Hydraulic Pump, Capacity Vol.:5.70 L, Power Source:Electric, Wt.:71 lb ABUsed With:All Greenlee Benders, Useable Oil Cap.:6.0 qt [Max], Power Cap.:1 1/2 hp, Voltage:220.00 VAC, Frequency:50.0 Hz, Width:12 in, Height:17 1/2 in, Wt.:71 lb ACUsed With:Greenlee 2 in. Capacity Benders, Flow:4.0 mL/h [Max], Flow @ Pressure:0.30 L/min @ 10000 psi, Power Cap.:1/2 hp [Max], Voltage:120.00 VAC, Frequency:60.0 Hz, Width:10 in, Height:15 1/2 in, Type:Hydraulic Pump, Capacity Vol.:2.80 L, Power Source:Electric, Wt.:51 lb | *$2,746.58 |
| Electric Hydraulic Pumps Model Code: AA (part# 980)
Brand: Greenlee Part Number: 980
980 Model Code: AA (part# 980) This item features: -Automatic or manual ram selector valve. -Low voltage pendant coupled to solid state motor controls eliminates contact arcing. -Pendant advance control. -Molded enclosure protects pump, motor, and circuitry. -For use with single hose hydraulic systems with spring return rams. -Handy pendant advance control. -Low voltage pendant coupled to solid state motor controls eliminates contact arcing for greater reliability and longer life. -Automatic or manual ram return selector valve provides more control from the pendant switch. -Molded enclosure protects pump, motor and circuitry in tough working environments. -Use with single hose hydraulic systems with spring return rams. -Operating Pressure: 10000.0 psi [Max]. -Length: 12 in. -Price is for 1 Each. Model Code  Model Description AAUsed With:All Greenlee Benders, Flow:4.8 mL/h [Max], Flow @ Pressure:0.90 L/min @ 10000 psi, Power Cap.:1 1/2 hp [Max], Voltage:120.00 VAC, Frequency:60.0 Hz, Width:12 in, Height:17 1/2 in, Type:Hydraulic Pump, Capacity Vol.:5.70 L, Power Source:Electric, Wt.:71 lb ABUsed With:All Greenlee Benders, Useable Oil Cap.:6.0 qt [Max], Power Cap.:1 1/2 hp, Voltage:220.00 VAC, Frequency:50.0 Hz, Width:12 in, Height:17 1/2 in, Wt.:71 lb ACUsed With:Greenlee 2 in. Capacity Benders, Flow:4.0 mL/h [Max], Flow @ Pressure:0.30 L/min @ 10000 psi, Power Cap.:1/2 hp [Max], Voltage:120.00 VAC, Frequency:60.0 Hz, Width:10 in, Height:15 1/2 in, Type:Hydraulic Pump, Capacity Vol.:2.80 L, Power Source:Electric, Wt.:51 lb | *$4,407.54 |
 | Hydraulic Cable Cutter Sets Model Code: AC - Price is for 1 Each (part# 750E975)
Brand: Greenlee Part Number: 750E975
750E975 Model Code: AC - Price is for 1 Each (part# 750E975) This item features: -Jaws are specially hardened to hold sharpness and slide open quickly to reduce cutting time. -Capacity Wt.: 11 tons. -Type: Cable Cutter. -Applicable Materials: Aluminum, Copper. -Cable/Wire Size (2): 1000.000 kcmil [Max]. -Jaw Opening: 1 15/16 in [Max]. Model Code  Model Description AAIncludes:Hydraulic Cutter, Ram, 767 Hand Pump, Hydraulic Hose, Storage Box, Wt.:29 lb ABIncludes:Hydraulic Cutter, Ram, Storage Box, Wt.:25 lb ACIncludes:Ram, Hydraulic Cutter, 975 Electric Hydraulic Pump, Hydraulic Hose, Storage Box, Wt.:84 lb | *$4,824.48 |
 | Hydraulic Hand Foot Pumps Model Code: AB (part# 767)
Brand: Greenlee Part Number: 767
767 Model Code: AB (part# 767) Hydraulic Foot Pump High Pressure Hydraulic Hand Pump Hydraulic Hand Pump This item features: -Foot activated release lever. -Hold-down pin keeps pedal down for storage and transport. -Angles based bar keeps the pump upright and stable. -Portable and powerful for use with Geenlee Benders. -Operates in any position. -Steel pump body and handle with rubber grip. -Mounting holes for permanent positioning. -Lightweight and portable for use with Greenlee Punch Drivers. -Steel pump body/reservoir with cast aluminum handle. -Price is for 1 Each. Model Code  Model Description AANo. of Speeds:1, Operating Pressure:10000.0 psi [Max], Outlet Size:3/8 in, Length:25 1/2 in, Width:7 in, Height:6 in, Drive Type:Lever Action, Includes:3/8 in. Female Hydraulic Connector, Dust Cap, Designated Fluid:Hydraulic Oil, Type:Hydraulic Hand Pump, Vol. @ No. of Strokes:0.161 cu in @ 1 ABNo. of Speeds:1, Operating Pressure:6500.0 psi [Max], Drive Type:Lever Action, Designated Fluid:Hydraulic Oil ACOperating Pressure:6500.0 psi [Max], Includes:1/4 in. Female Coupler, Dust Cap | *$491.46 |
| Electric Hydraulic Pumps Model Code: AB (part# 980-22PS)
Brand: Greenlee Part Number: 980-22PS
980-22PS Model Code: AB (part# 980-22PS) This item features: -Automatic or manual ram selector valve. -Low voltage pendant coupled to solid state motor controls eliminates contact arcing. -Pendant advance control. -Molded enclosure protects pump, motor, and circuitry. -For use with single hose hydraulic systems with spring return rams. -Handy pendant advance control. -Low voltage pendant coupled to solid state motor controls eliminates contact arcing for greater reliability and longer life. -Automatic or manual ram return selector valve provides more control from the pendant switch. -Molded enclosure protects pump, motor and circuitry in tough working environments. -Use with single hose hydraulic systems with spring return rams. -Operating Pressure: 10000.0 psi [Max]. -Length: 12 in. -Price is for 1 Each. Model Code  Model Description AAUsed With:All Greenlee Benders, Flow:4.8 mL/h [Max], Flow @ Pressure:0.90 L/min @ 10000 psi, Power Cap.:1 1/2 hp [Max], Voltage:120.00 VAC, Frequency:60.0 Hz, Width:12 in, Height:17 1/2 in, Type:Hydraulic Pump, Capacity Vol.:5.70 L, Power Source:Electric, Wt.:71 lb ABUsed With:All Greenlee Benders, Useable Oil Cap.:6.0 qt [Max], Power Cap.:1 1/2 hp, Voltage:220.00 VAC, Frequency:50.0 Hz, Width:12 in, Height:17 1/2 in, Wt.:71 lb ACUsed With:Greenlee 2 in. Capacity Benders, Flow:4.0 mL/h [Max], Flow @ Pressure:0.30 L/min @ 10000 psi, Power Cap.:1/2 hp [Max], Voltage:120.00 VAC, Frequency:60.0 Hz, Width:10 in, Height:15 1/2 in, Type:Hydraulic Pump, Capacity Vol.:2.80 L, Power Source:Electric, Wt.:51 lb | *$5,914.22 |
| Hydraulic Hand Foot Pumps Model Code: AA (part# 755)
Brand: Greenlee Part Number: 755
755 Model Code: AA (part# 755) Hydraulic Foot Pump High Pressure Hydraulic Hand Pump Hydraulic Hand Pump This item features: -Foot activated release lever. -Hold-down pin keeps pedal down for storage and transport. -Angles based bar keeps the pump upright and stable. -Portable and powerful for use with Geenlee Benders. -Operates in any position. -Steel pump body and handle with rubber grip. -Mounting holes for permanent positioning. -Lightweight and portable for use with Greenlee Punch Drivers. -Steel pump body/reservoir with cast aluminum handle. -Price is for 1 Each. Model Code  Model Description AANo. of Speeds:1, Operating Pressure:10000.0 psi [Max], Outlet Size:3/8 in, Length:25 1/2 in, Width:7 in, Height:6 in, Drive Type:Lever Action, Includes:3/8 in. Female Hydraulic Connector, Dust Cap, Designated Fluid:Hydraulic Oil, Type:Hydraulic Hand Pump, Vol. @ No. of Strokes:0.161 cu in @ 1 ABNo. of Speeds:1, Operating Pressure:6500.0 psi [Max], Drive Type:Lever Action, Designated Fluid:Hydraulic Oil ACOperating Pressure:6500.0 psi [Max], Includes:1/4 in. Female Coupler, Dust Cap | *$845.84 |
| Hydraulic Hand Foot Pumps Model Code: AC (part# 1725)
Brand: Greenlee Part Number: 1725
1725 Model Code: AC (part# 1725) Hydraulic Foot Pump High Pressure Hydraulic Hand Pump Hydraulic Hand Pump This item features: -Foot activated release lever. -Hold-down pin keeps pedal down for storage and transport. -Angles based bar keeps the pump upright and stable. -Portable and powerful for use with Geenlee Benders. -Operates in any position. -Steel pump body and handle with rubber grip. -Mounting holes for permanent positioning. -Lightweight and portable for use with Greenlee Punch Drivers. -Steel pump body/reservoir with cast aluminum handle. -Price is for 1 Each. Model Code  Model Description AANo. of Speeds:1, Operating Pressure:10000.0 psi [Max], Outlet Size:3/8 in, Length:25 1/2 in, Width:7 in, Height:6 in, Drive Type:Lever Action, Includes:3/8 in. Female Hydraulic Connector, Dust Cap, Designated Fluid:Hydraulic Oil, Type:Hydraulic Hand Pump, Vol. @ No. of Strokes:0.161 cu in @ 1 ABNo. of Speeds:1, Operating Pressure:6500.0 psi [Max], Drive Type:Lever Action, Designated Fluid:Hydraulic Oil ACOperating Pressure:6500.0 psi [Max], Includes:1/4 in. Female Coupler, Dust Cap | *$922.06 |
 | Haldex High Pressure Hydraulic Gear Pump .258 Cu. In., Model# 1002966
Brand: Haldex
This Haldex high pressure hydraulic gear pump provides superior versatility. Use it on mobile equipment, construction and agricultural equipment, machine tools, material handling and mining equipment, PTO pumps, refuse haulers, compaction and baling equipment. Standard 4-bolt mount. 1.78in. diameter pilot with 1/2in. x 1 1/2in. shaft, 1/8in. square key. Heavy duty cast iron pump turns at 4000 RPM max. in CW or CCW direction. Use as a fluid pump or fluid motor. Similar to Parker D Series, Webster YB Series, Rexroth S12, MTED Series. Flexible coupling or belt (pulley) drive. 95% efficient. U.S.A. Max. PSI: 2,300, Shaft Diameter (in.): 1/2 x 1 1/2, GPM: 2, 4, Material: Cast iron, Usage: Fluid pump or fluid motor, Rotations Per Minute: 4,000 | *$129.99 |
 | Haldex High Pressure Hydraulic Gear Pump .097 Cu. In., Model# 1002963
Brand: Haldex
Use it on mobile equipment, construction and agricultural equipment, machine tools, material handling and mining equipment, PTO pumps, refuse haulers, compaction and baling equipment. Standard 4-bolt mount. 1.78in. diameter pilot with 1/2in. x 1 1/2in. shaft, 1/8in. square key. Heavy duty cast iron pump turns at 4000 RPM max. in CW or CCW direction. Use as a fluid pump or fluid motor. Similar to Parker D Series, Webster YB Series, Rexroth S12, MTED Series. Flexible coupling or belt (pulley) drive. 95% efficient. U.S.A. Max. PSI: 3,000, Shaft Diameter (in.): 1/2 x 1 1/2, GPM: 3/4, 1 1/2, Material: Cast iron, Usage: Fluid pump or fluid motor, Rotations Per Minute: 4,000 | *$129.99 |
 | Haldex High Pressure Hydraulic Gear Pump .065 Cu. In., Model# 1002962
Brand: Haldex
Use it on mobile equipment, construction and agricultural equipment, machine tools, material handling and mining equipment, PTO pumps, refuse haulers, compaction and baling equipment. Standard 4-bolt mount. 1.78in. diameter pilot with 1/2in. x 1 1/2in. shaft, 1/8in. square key. Heavy duty cast iron pump turns at 4000 RPM max. in CW or CCW direction. Use as a fluid pump or fluid motor. Similar to Parker D Series, Webster YB Series, Rexroth S12, MTED Series. Flexible coupling or belt (pulley) drive. 95% efficient. U.S.A. Max. PSI: 3,000, Shaft Diameter (in.): 1/2 x 1 1/2, GPM: 1/2, 1, Material: Cast iron, Usage: Fluid pump or fluid motor, Rotations Per Minute: 4,000 | *$129.99 |
| Haldex High Pressure Hydraulic Gear Pump .129 Cu. In., Model# 1002964
Brand: Haldex
Use it on mobile equipment, construction and agricultural equipment, machine tools, material handling and mining equipment, PTO pumps, refuse haulers, compaction and baling equipment. Standard 4-bolt mount. 1.78in. diameter pilot with 1/2in. x 1 1/2in. shaft, 1/8in. square key. Heavy duty cast iron pump turns at 4000 RPM max. in CW or CCW direction. Use as a fluid pump or fluid motor. Similar to Parker D Series, Webster YB Series, Rexroth S12, MTED Series. Flexible coupling or belt (pulley) drive. 95% efficient. U.S.A. Max. PSI: 3,000, Shaft Diameter (in.): 1/2 x 1 1/2, GPM: 1, 2, Material: Cast iron, Usage: Fluid pump or fluid motor, Rotations Per Minute: 4,000 | *$129.99 |
 | Haldex Hydraulic Pump - 11 GPM, 2-Stage, Model# 1001689
Brand: Haldex
The Haldex 2-stage hydraulic pump can give you faster cycle times and higher possible pressure with a small engine. Excellent for use on log splitters. 85% efficient. U.S.A. Max. PSI: 3,000, Shaft Diameter (in.): 1/2, GPM: 11, Stage: 2, Usage: With open center hydraulic systems, Rotations Per Minute: 4,000 | *$139.99 |
| Haldex High Pressure Hydraulic Gear Pump, Model# 1002967
Brand: Haldex
Use it on mobile equipment, construction and agricultural equipment, machine tools, material handling and mining equipment, PTO pumps, refuse haulers, compaction and baling equipment. Standard 4-bolt mount. 1.78in. diameter pilot with 1/2in. x 1 1/2in. shaft, 1/8in. square key. Heavy duty cast iron pump turns at 4000 RPM max. in CW or CCW direction. Use as a fluid pump or fluid motor. Similar to Parker D Series, Webster YB Series, Rexroth S12, MTED Series. Flexible coupling or belt (pulley) drive. 95% efficient. U.S.A. Max. PSI: 1,600, Shaft Diameter (in.): 1/2, GPM: 3, 6, Material: Cast iron, Usage: Fluid pump or fluid motor, Rotations Per Minute: 4,000 | *$139.99 |
| Haldex High Pressure Hydraulic Gear Pump .517 Cu. In., Model# 10567
Brand: Haldex
Use it on mobile equipment, construction and agricultural equipment, machine tools, material handling and mining equipment, PTO pumps, refuse haulers, compaction and baling equipment. Standard 4-bolt mount. 1.78in. diameter pilot with 1/2in. x 1 1/2in. shaft, 1/8in. square key. Heavy-duty cast iron pump turns at 4000 RPM max. in CW or CCW direction. Use as a fluid pump or fluid motor. Similar to Parker D Series, Webster YB Series, Rexroth S12, MTED Series. Flexible coupling or belt (pulley) drive. 95% efficient. U.S.A. Max. PSI: 1,200, Shaft Diameter (in.): 1/2 x 1 1/2, GPM: 4, 8, Material: Cast iron, Usage: Fluid pump or fluid motor, Rotations Per Minute: 4,000 | *$149.99 |
 | Haldex Hydraulic Pump - 13.6 GPM, 2-Stage, Model# 1001506
Brand: Haldex
The 2-stage pump can give you faster cycle times and higher possible pressure with a small engine. Excellent for use on log splitters. 85% efficient. U.S.A. Max. PSI: 3,000, Shaft Diameter (in.): 1/2, GPM: 2.9, 13.6, Stage: 2, Usage: Open center hydraulic systems, Rotations Per Minute: 4,000 | *$159.99 |
 | Haldex Hydraulic Pump - 16 GPM, 2-Stage, Model# 1001507
Brand: Haldex
The 2-stage pump can give you faster cycle times and higher possible pressure with a small engine. Excellent for use on log splitters. 85% efficient. U.S.A. Max. PSI: 3,000, Shaft Diameter (in.): 1/2, GPM: 3.5, 16, Stage: 2, Usage: Open center hydraulic systems, Rotations Per Minute: 4,000 | *$179.99 |
 | Haldex High Performance Gear Pump .61 Cu. In., Model# WP09A1B100R03BA102N
Brand: Haldex
Compact, high-performance package is constructed of high-strength aluminum housing with cast iron end covers. Ideal for a wide variety of applications such as material handling, aerial lifts, turf care, agriculture and construction. Low-noise pumps have SAE A 2-bolt mounts and SAE O-ring side ports. W900 Series: 90% efficiency, 3/4in. keyed shaft. U.S.A. Max. PSI: 4,000, Shaft Diameter (in.): 3/4, GPM: 4.72, 9.44, Material: Aluminum and cast iron | *$179.99 |
 | Haldex High Performance Gear Pump .61 Cu. In., Model# WP09A1B100L03BA102N
Brand: Haldex
Compact, high-performance package is constructed of high-strength aluminum housing with cast iron end covers. Ideal for a wide variety of applications such as material handling, aerial lifts, turf care, agriculture and construction. Low-noise pumps have SAE A 2-bolt mounts and SAE O-ring side ports. W900 Series: 90% efficiency, 3/4in. keyed shaft. U.S.A. Max. PSI: 3,600, Shaft Diameter (in.): 3/4, GPM: 4.72, 9.44, Material: Aluminum and cast iron, Rotations Per Minute: 4,000 | *$179.99 |
| Haldex High Performance Gear Pump .976 Cu. In., Model# WP09A1B160L03BA102N
Brand: Haldex
Compact, high-performance package is constructed of high-strength aluminum housing with cast iron end covers. Ideal for a wide variety of applications such as material handling, aerial lifts, turf care, agriculture and construction. Low-noise pumps have SAE A 2-bolt mounts and SAE O-ring side ports. W900 Series: 90% efficiency, 3/4in. keyed shaft. U.S.A. Max. PSI: 4,000, Shaft Diameter (in.): 3/4, GPM: 7.49, 14.99, Material: Aluminum and cast iron, Rotations Per Minute: 500 - 4,000 | *$199.99 |
| Haldex High Performance Gear Pump .976 Cu. In., Model# WP09A1B160R03BA102N
Brand: Haldex
Compact, high-performance package is constructed of high-strength aluminum housing with cast iron end covers. Ideal for a wide variety of applications such as material handling, aerial lifts, turf care, agriculture and construction. Low-noise pumps have SAE A 2-bolt mounts and SAE O-ring side ports. W900 Series: 90% efficiency, 3/4in. keyed shaft. U.S.A. Max. PSI: 3,600, Shaft Diameter (in.): 3/4, GPM: 7.49, 14.99, Material: Aluminum and cast iron, Rotations Per Minute: 4,000 | *$199.99 |
| Haldex High Performance Gear Pump 1.159 Cu. In., Model# WP09A1B190L03BA103N
Brand: Haldex
Compact, high-performance package is constructed of high-strength aluminum housing with cast iron end covers. Ideal for a wide variety of applications such as material handling, aerial lifts, turf care, agriculture and construction. Low-noise pumps have SAE A 2-bolt mounts and SAE O-ring side ports. W900 Series: 90% efficiency, 3/4in. keyed shaft. U.S.A. Max. PSI: 4,000, Shaft Diameter (in.): 3/4, GPM: 8.95, 17.9, Material: Aluminum and cast iron, Rotations Per Minute: 500 - 4,000 | *$219.99 |
 | Haldex 12 Volt DC Power Unit, No Valving, Model# 1261009
Brand: Haldex
Use in applications where control valves are mounted externally away from power units. Flow and pressure to manifolds allow usage in many applications. Return port for returning oil back to tank. Basic power unit has no valving. U.S.A. | *$249.99 |
 | Haldex Cast Iron Hydraulic Gear Pump 1.8 Cu. In., Model# 2102724
Brand: Haldex
Heavy-duty cast iron pump has high pressure capability. Pressure-balanced. Operates at up to 3600 RPM. Similar to Webster YD Series. Parker M Series. Rexroth S20, Cross 50P, Cessna 25550, Ultra 2PX, 2PR and 3PR. Commercial P330, and Tyrone P16. Standard SAE 2-bolt B flange, 4.00in. diameter pilot with 7/8in. x 1 5/8in. shaft, 1/4in. square key. SAE O-ring ports: inlet 1 5/8-20, outlet 1 1/16-12. 85% efficient. U.S.A Max. PSI: 4,000, Shaft Diameter (in.): 7/8 x 1 5/8, GPM: 13.9, 27.8, Material: Cast iron, Rotations Per Minute: 3,600 | *$259.99 |
 | Haldex Cast Iron Hydraulic Gear Pump 1.8 Cu. In., Model# 2102723
Brand: Haldex
Heavy-duty cast iron pump has high pressure capability. Pressure-balanced. Operates at up to 3600 RPM. Similar to Webster YD Series. Parker M Series. Rexroth S20, Cross 50P, Cessna 25550, Ultra 2PX, 2PR and 3PR. Commercial P330, and Tyrone P16. Standard SAE 2-bolt B flange, 4.00in. diameter pilot with 7/8in. x 1 5/8in. shaft, 1/4in. square key. SAE O-ring ports: inlet 1 5/8-12, outlet 1 1/16-12. 85% efficient. U.S.A Max. PSI: 4,000, Shaft Diameter (in.): 7/8 x 1 5/8, GPM: 13.9, 27.8, Material: Cast iron, Rotations Per Minute: 3,600 | *$259.99 |
| Haldex Cast Iron Hydraulic Gear Pump 2.6 Cu. In., Model# 2102726
Brand: Haldex
Heavy-duty cast iron pump has high pressure capability. Pressure-balanced. Operates at up to 3600 RPM. Similar to Webster YD Series. Parker M Series. Rexroth S20, Cross 50P, Cessna 25550, Ultra 2PX, 2PR and 3PR. Commercial P330, and Tyrone P16. Standard SAE 2-bolt B flange, 4.00in. diameter pilot with 7/8in. x 1 5/8in. shaft, 1/4in. square key. SAE O-ring ports: inlet 1 5/8-20, outlet 1 1/16-12. 85% efficient. U.S.A Max. PSI: 4,000, Shaft Diameter (in.): 7/8 x 1 5/8, GPM: 20.3, 40.4, Material: Cast iron, Rotations Per Minute: 3,600 | *$269.99 |
| Haldex Cast Iron Hydraulic Gear Pump 2.6 Cu. In., Model# 2102725
Brand: Haldex
Heavy-duty cast iron pump has high pressure capability. Pressure-balanced. Operates at up to 3600 RPM. Similar to Webster YD Series. Parker M Series. Rexroth S20, Cross 50P, Cessna 25550, Ultra 2PX, 2PR and 3PR. Commercial P330, and Tyrone P16. Standard SAE 2-bolt B flange, 4.00in. diameter pilot with 7/8in. x 1 5/8in. shaft, 1/4in. square key. SAE O-ring ports: inlet 1 5/8-20, outlet 1 1/16-12. 85% efficient. U.S.A Max. PSI: 4,000, Shaft Diameter (in.): 7/8 x 1 5/8, GPM: 20.2, 40.4, Material: Cast iron, Rotations Per Minute: 3,600 | *$269.99 |
| Haldex Cast Iron Hydraulic Gear Pump - 3.33 Cu. In., Model# 2102727
Brand: Haldex
Heavy-duty cast iron pump has high pressure capability. Pressure-balanced. Operates at up to 3600 RPM. Similar to Webster YD Series. Parker M Series. Rexroth S20, Cross 50P, Cessna 25550, Ultra 2PX, 2PR and 3PR. Commercial P330, and Tyrone P16. Standard SAE 2-bolt B flange, 4.00in. diameter pilot with 7/8in. x 1 5/8in. shaft, 1/4in. square key. SAE O-ring ports: inlet 1 5/8-20, outlet 1 1/16-12. 85% efficient. U.S.A Max. PSI: 3,625, Shaft Diameter (in.): 7/8 x 1 5/8, GPM: 25.9, 51.8, Material: Cast iron, Rotations Per Minute: 3,600 | *$279.99 |
 | Haldex 12 Volt DC Power Unit - Manual Operation, Single Acting, Model# 1261033
Brand: Haldex
The Haldex 12V DC power unit is used in applications where control valves are mounted externally away from power units. Flow and pressure to manifolds allow usage in many applications. Return port for returning oil back to tank. Check and relief valve. 9/16in.-18 SAE ports. U.S.A. Flow (GPM): 1.4 GPM at 1,600 PSI, Reservoir Capacity: 3 qt., Inlet Port (in.): 9/16 18 SAE, Outlet Port (in.): 9/16 18 SAE, Volts: 12 DC | *$329.99 |
 | Haldex Hydraulic Pump - 22 GPM, 2-Stage, Model# 1080035
Brand: Haldex
The 2-stage pump can give you faster cycle times and higher possible pressure with a small engine. Excellent for use on log splitters. 85% efficient. U.S.A. | *$329.99 |
 | Haldex 12 Volt DC Power Unit, Solenoid Operation, Single-Acting, Model# 1261014
Brand: Haldex
The Haldex 12V DC power unit is used in applications where control valves are mounted externally away from power units. Flow and pressure to manifolds allow usage in many applications. Return port for returning oil back to tank. Check and relief valve. 9/16in.-18 SAE ports. Items 1076 and 1077 are for double acting cylinders; others are for single acting cylinders. U.S.A. | *$349.99 |
 | Haldex 12 Volt DC Power Unit - Solenoid Operation, Single Acting, Model# 1261096
Brand: Haldex
The Haldex 12V DC power unit with solenoid operation is used in applications where control valves are mounted externally away from power units. Flow and pressure to manifolds allow usage in many applications. Return port for returning oil back to tank. Check and relief valve. 9/16in.-18 SAE ports. Items 1076 and 1077 are for double acting cylinders; others are for single acting cylinders. U.S.A. | *$379.99 |
 | Haldex Hydraulic Pump - 28 GPM, 2-Stage, Model# 1080036
Brand: Haldex
The 2-stage pump can give you faster cycle times and higher possible pressure with a small engine. Excellent for use on log splitters. 85% efficient. U.S.A. Max. PSI: 3,000, Shaft Diameter (in.): 5/8, GPM: 28, Stage: 2, Rotations Per Minute: 4,000 | *$399.99 |
 | Haldex 1 HP 115/208-230 Volt AC Hydraulic Power Unit, Manual, Model# 1530038
Brand: Haldex
Mounts vertically or horizontally. 60 Hz TEFC motor turns at 3450 RPM. .097 displacement pump and 1.5 gallon reservoir. Relief valve set at 2000 PSI. 1.25 GPM with check valve to prevent back flow. U.S.A. | *$449.99 |
 | Haldex 1 HP 115/208-230 Volt AC Hydraulic Power Unit, Solenoid, Model# 1530037
Brand: Haldex
Mounts vertically or horizontally. 60 Hz TEFC motor turns at 3450 RPM. .097 displacement pump and 1.5 gallon reservoir. Relief valve set at 2000 PSI. 1.25 GPM with check valve to prevent back flow. U.S.A. | *$479.99 |
 | Haldex Auto Hoist Power Unit 2 HP 208/230V, Model# 1530035
Brand: Haldex | *$499.99 |
|
