 | Howse Fertilizer Spreader - 760-Lb. Capacity, Model# FS761
Brand: Howse
Spun 1-pc. hopper has welded, heavy-duty door slides. Stainless steel doors for gauging spread. Fully adjustable spread left, right or center. Powder-coat finish for long-lasting durability. Recommended for tractors with 25-45 HP. 1-year limited warranty. Truck ship. Hitch Type: 3-Point, Required HP: 25 - 45, Load Capacity (lbs.): 760 | *$619.99 |
 | Howse Landscape Rake - 3-Point, Category 1, 8ft. Length
Brand: Howse
Heat-treated 5/16in. x 1in. spring steel tines. 360deg rotation allows angular and reverse settings. Rugged landscape rakes clean up roadways, beaches and landscape sites fast! Fits category 1 hitches. Large, heavy duty tines dig into the ground, breaking up the crustiest soils! Truck Ship. U.S.A. Hitch Type: 3-Point, Category Type: 1, Working Width (in.): 96, Blade Type: Landscape Rake, Tines (qty.): 48, Tines per Foot (qty.): 6 | *$629.99 |
 | Howse Spike-Tooth Harrow - 3-Point, 7ft. Length
Brand: Howse
Constructed of heavy-duty 3in. channel and 2in. x 2in. angle iron for long-lasting durability. Cultivates soil with 9in. x 3/4in. square spikes. Truck ship. U.S.A. Hitch Type: 3-Point, Category Type: 1, Working Width (in.): 84, Blade Type: Spike Tooth | *$699.99 |
 | Howse Box Blade - 3-Point, Category 1, 5ft. Length
Brand: Howse
Reversible 1/2in. x 6in. high-carbon steel blade. Steel scarifiers have welded on, high-carbon teeth to break up compacted soils. Fits category 1 hitch, pins included. Truck Ship. U.S.A. Working Width (in.): 60, Hitch Type: 3-Point, Category Type: 1, Blade Type: Box Blade, Shanks (qty.): 5 | *$719.99 |
 | Howse Grader Blade - 3-Point, 8ft. Width
Brand: Howse
For Category 1 hitch and lift pins. 1/2in. x 6in. reversible cutting edge, spring-loaded latch-type tilt and easy full swing. Truck ship. U.S.A. Working Width (in.): 96, Hitch Type: 3-Point, Category Type: 1, Blade Type: Grader Blade | *$779.99 |
| Howse Box Blade - 3-Point, Category 1, 6ft. Length, Model# EB72
Brand: Howse
Reversible 1/2in. x 6in. high-carbon steel blade. Steel scarifiers have welded on, high-carbon teeth to break up compacted soils. Fits category 1 hitch, pins included. Truck Ship. U.S.A. Working Width (in.): 72, Hitch Type: 3-Point, Category Type: 1, Blade Type: Box Blade, Shanks (qty.): 6 | *$779.99 |
 | Howse Moldboard Plows - 3-Point, Category 1, 12in. Length
Brand: Howse
Rugged 1in. x 4in. steel bar construction. 1-bottom design. All have replaceable share and shin. Plows easily connect to a 3-point hitch. Coulter kit (Item# 250199) and depth gauge (Item# 2501990) sold separately. U.S.A. Hitch Type: 3-Point, Category Type: 1, Blade Type: Moldboard | *$829.99 |
| Howse Moldboard Plows - 3-Point, Category 1, 14in. Length
Brand: Howse
Rugged 1in. x 4in. steel bar construction. 2-bottom design. All have replaceable share and shin. Plows easily connect to a 3-point hitch. Coulter kit (Item# 250199) and depth gauge (Item# 2501990) sold separately. U.S.A. Hitch Type: 3, Category Type: 1 | *$849.99 |
 | Howse Rough Cut Mower - 3-Point, Category 1, 5ft. Length
Brand: Howse
3-point mowers include PTO driveline and rear swivel wheel. Heavy-duty bar cross braced frame, saucer shaped blade carrier, cast wheel hub 45 HP gearbox, 3-point category 1 hitch, segmented rubber wheel 35RN series drive shaft, 7 1/2in. sides, shearpin protection. Fit category 1 tractors. Chain guard sold separately. U.S.A. Mower Type: Rough Cut, Hitch Type: 3-Point, Category Type: 1, Working Width (in.): 60, Required HP: 25 - 45, Gearbox Rating (HP): 45, PTO Drive Type: Shear Pin, Deck Thickness: 12 Gauge | *$899.99 |
| Howse Rough Cut Mower - 3-Point, Category 1, 4ft. Length
Brand: Howse
3-point mowers include PTO driveline and rear swivel wheel. Heavy-duty bar cross braced frame, saucer shaped blade carrier, cast wheel hub 45 HP gearbox, 3-point category 1 hitch, segmented rubber wheel 35RN series drive shaft, 7 1/2in. sides, shearpin protection. Fit category 1 tractors. Chain guard sold separately. U.S.A. Mower Type: Rough Cut, Hitch Type: 3-Point, Category Type: 1, Working Width (in.): 48, Required HP: 15 - 30, Gearbox Rating (HP): 45, PTO Drive Type: Shear Pin | *$899.99 |
 | Ideal 35-862 5/8 x 4-3/4 in. Mini Auger
Brand: Ideal Part Number: 35-862
Ideal 35-862 5/8 X 4-3/4" AugerIDEAL brings you products that make your job easier; products that you can rely on, with warranties you can trust; products that are available whenever and wherever you need them. Ideal Industries divisions are dedicated to the professionals in the Electrical, DataComm, Wire Processing and OEM Connections markets.Ideal 35-862 5/8 X 4-3/4" Auger Features:; Designed to fit between wall studs when used with common drills; Eliminates the need for expensive right angle drills. | *$16.81 |
| Ideal 35-866 7/8 x 4-3/4 in. Mini Auger
Brand: Ideal Part Number: 35-866
Ideal 35-866 7/8 X 4-3/4" AugerIDEAL brings you products that make your job easier; products that you can rely on, with warranties you can trust; products that are available whenever and wherever you need them. Ideal Industries divisions are dedicated to the professionals in the Electrical, DataComm, Wire Processing and OEM Connections markets.Ideal 35-866 7/8 X 4-3/4" Auger Features:; Designed to fit between wall studs when used with common drills; Eliminates the need for expensive right angle drills. | *$16.99 |
| Ideal 35-864 3/4 x 4-3/4 in. Mini Auger
Brand: Ideal Part Number: 35-864
Ideal 35-864 3/4 X 4-3/4" AugerIDEAL brings you products that make your job easier; products that you can rely on, with warranties you can trust; products that are available whenever and wherever you need them. Ideal Industries divisions are dedicated to the professionals in the Electrical, DataComm, Wire Processing and OEM Connections markets.Ideal 35-864 3/4 X 4-3/4" Auger Features:; Designed to fit between wall studs when used with common drills; Eliminates the need for expensive right angle drills. | *$17.91 |
| Ideal 35-868 1 x 4-3/4 in. Mini Auger
Brand: Ideal Part Number: 35-868
Ideal 35-868 1 X 4-3/4" AugerIDEAL brings you products that make your job easier; products that you can rely on, with warranties you can trust; products that are available whenever and wherever you need them. Ideal Industries divisions are dedicated to the professionals in the Electrical, DataComm, Wire Processing and OEM Connections markets.Ideal 35-868 1 X 4-3/4" Auger Features:; Designed to fit between wall studs when used with common drills; Eliminates the need for expensive right angle drills. | *$23.34 |
 | Ideal 35-828 Power Ship Auger, 1-1/8 Inch
Brand: Ideal Part Number: 35-828
Ideal 35-828 Nailbiter Power Ship Auger, 1-1/8 InchIDEAL brings you products that make your job easier; products that you can rely on, with warranties you can trust; products that are available whenever and wherever you need them. Ideal Industries divisions are dedicated to the professionals in the Electrical, DataComm, Wire Processing and OEM Connections markets.Ideal 35-828 Nailbiter Power Ship Auger, 1-1/8 Inch Features:; 17 inches long with 12 inches of twist; Drills through nails, wood, and other materials; Full length heat treated and tempered for durability; Precision designed and cut screw point to resist breakage. | *$29.99 |
| Ideal 35-815 Short Ship Auger, 1 Inch
Brand: Ideal Part Number: 35-815
Ideal 35-815 Nailbiter Short Ship Auger, 1 InchIDEAL brings you products that make your job easier; products that you can rely on, with warranties you can trust; products that are available whenever and wherever you need them. Ideal Industries divisions are dedicated to the professionals in the Electrical, DataComm, Wire Processing and OEM Connections markets.Ideal 35-815 Nailbiter Short Ship Auger, 1 Inch Features:; 7-1/2 inches long with 5 inches of twist; Drills through nails, wood, and other materials; Full length heat treated and tempered for durability; Precision designed and cut screw point to resist breakage. | *$39.45 |
| Ideal 35-816 Short Ship Auger, 1-1/8 Inch
Brand: Ideal Part Number: 35-816
Ideal 35-816 Nailbiter Short Ship Auger, 1-1/8 InchIDEAL brings you products that make your job easier; products that you can rely on, with warranties you can trust; products that are available whenever and wherever you need them. Ideal Industries divisions are dedicated to the professionals in the Electrical, DataComm, Wire Processing and OEM Connections markets.Ideal 35-816 Nailbiter Short Ship Auger, 1-1/8 Inch Features:; 7-1/2 inches long with 5 inches of twist; Drills through nails, wood, and other materials; Full length heat treated and tempered for durability; Precision designed and cut screw point to resist breakage. | *$48.78 |
 | IMD 10 KW PTO GENERATOR
Brand: IMD Model: 10009 Part Number: PTO 10/2S-10009
IMD 10 KW PTO GENERATOR -10000 Watts -Simultaneous 120/240V -Requires minimum 20 PTO Horsepower -Maximum breaker capacity 40A at 240V -Duplex 120V, 20A NEMA 5-20 and Straight Blade 120/240V, 50A NEMA 1450 Receptacles -All Circuits Protected Individually -540 PTO Speed -1-3/8" 6 spline shaft | *$1,438.00 |
 | IMD 10 KW PTO GENERATOR w/ AVR
Brand: IMD Model: 10010 Part Number: PTO 10/2S AVR
IMD 10 KW PTO GENERATOR w/ AVR -10000 Watts -Simultaneous 120/240V -Requires minimum 20 PTO Horsepower -Maximum breaker capacity 40A at 240V -Duplex 120V, 20A NEMA 5-20 and Straight Blade 120/240V, 50A NEMA 1450 Receptacles -All Circuits Protected Individually -540 PTO Speed -1-3/8" 6 spline shaft | *$1,592.00 |
 | IMD 10 KW PTO GENERATOR KIT
Brand: IMD Model: 10109 Part Number: PTO 10/2S KIT
IMD 10 KW PTO GENERATOR -10000 Watts -Simultaneous 120/240V -Requires minimum 20 PTO Horsepower -Maximum breaker capacity 40A at 240V -Duplex 120V, 20A NEMA 5-20 and Straight Blade 120/240V, 50A NEMA 1450 Receptacles -All Circuits Protected Individually -540 PTO Speed -1-3/8" 6 spline shaft -Package comes with Full Power Plug, PTO Drive Line, and 3-Point Hitch Kit | *$1,985.00 |
 | IMD 16 KW PTO GENERATOR
Brand: IMD Model: 16001 Part Number: PTO 16/2S
IMD 16 KW PTO GENERATOR -16000 Watts -Simultaneous 120/240V -Requires minimum 33 PTO Horsepower -Maximum breaker capacity 60A at 240V -Duplex 120V, 20A NEMA 5-20 and Straight Blade 120/240V, 60A NEMA 1460 Receptacles -All Circuits Protected Individually -540 PTO Speed -1-3/8" 6 spline shaft | *$1,990.00 |
| IMD 10 KW PTO GENERATOR KIT w/ AVR
Brand: IMD Model: 10110 Part Number: PTO 10/2S AVR KIT
IMD 10 KW PTO GENERATOR w/ AVR -10000 Watts -Simultaneous 120/240V -Requires minimum 20 PTO Horsepower -Maximum breaker capacity 40A at 240V -Duplex 120V, 20A NEMA 5-20 and Straight Blade 120/240V, 50A NEMA 1450 Receptacles -All Circuits Protected Individually -540 PTO Speed -1-3/8" 6 spline shaft -Package comes with Full Power Plug, PTO Drive Line, and 3-Point Hitch Kit | *$2,139.00 |
| IMD 16 KW PTO GENERATOR w/ AVR
Brand: IMD Model: 16002 Part Number: PTO 16/2S AVR
IMD 16 KW PTO GENERATOR -16000 Watts -Simultaneous 120/240V -Requires minimum 33 PTO Horsepower -Maximum breaker capacity 60A at 240V -Duplex 120V, 20A NEMA 5-20 and Straight Blade 120/240V, 60A NEMA 1460 Receptacles -All Circuits Protected Individually -540 PTO Speed -1-3/8" 6 spline shaft | *$2,163.00 |
 | IMD 16 KW PTO GENERATOR KIT
Brand: IMD Model: 16101 Part Number: PTO 16/2S KIT
IMD 16 KW PTO GENERATOR -16000 Watts -Simultaneous 120/240V -Requires minimum 33 PTO Horsepower -Maximum breaker capacity 60A at 240V -Duplex 120V, 20A NEMA 5-20 and Straight Blade 120/240V, 60A NEMA 1460 Receptacles -All Circuits Protected Individually -540 PTO Speed -1-3/8" 6 spline shaft -Package comes with Full Power Plug, PTO Drive Line, and 3-Point Hitch Kit | *$2,551.00 |
 | IMD 22 KW PTO GENERATOR
Brand: IMD Model: 22005 Part Number: PTO 22/2S
IMD 22 KW PTO GENERATOR -22000 Watts -Simultaneous 120/240V -Requires minimum 41 PTO Horsepower -Maximum breaker capacity 90A at 240V -Duplex 120V, 20A NEMA 5-20 and Straight Blade 120/240V, 50A NEMA 1450 Receptacles, 175A Full power Recptacle -All Circuits Protected Individually -540 PTO Speed -1-3/8" 6 spline shaft | *$2,690.00 |
| IMD 16 KW PTO GENERATOR w/ AVR KIT
Brand: IMD Model: 16102 Part Number: PTO 16/2S AVR KIT
IMD 16 KW PTO GENERATOR -16000 Watts -Simultaneous 120/240V -Requires minimum 33 PTO Horsepower -Maximum breaker capacity 60A at 240V -Duplex 120V, 20A NEMA 5-20 and Straight Blade 120/240V, 60A NEMA 1460 Receptacles -All Circuits Protected Individually -540 PTO Speed -1-3/8" 6 spline shaft -Package comes with Full Power Plug, PTO Drive Line, and 3-Point Hitch Kit | *$2,724.00 |
 | IMD 22 KW PTO GENERATOR KIT
Brand: IMD Model: 22005 Part Number: PTO 22/2S
IMD 22 KW PTO GENERATOR -22000 Watts -Simultaneous 120/240V -Requires minimum 41 PTO Horsepower -Maximum breaker capacity 90A at 240V -Duplex 120V, 20A NEMA 5-20 and Straight Blade 120/240V, 50A NEMA 1450 Receptacles, 175A Full power Recptacle -All Circuits Protected Individually -540 PTO Speed -1-3/8" 6 spline shaft -Package comes with Full Power Plug, PTO Drive Line, and 3-Point Hitch Kit | *$3,255.00 |
 | IMD 31 KW PTO GENERATOR
Brand: IMD Model: 31002 Part Number: PTO 31/2S
IMD 31 KW PTO GENERATOR -31000 Watts -Simultaneous 120/240V -Requires minimum 63 PTO Horsepower -Maximum breaker capacity 125A at 240V -Duplex 120V, 20A NEMA 5-20 and Straight Blade 120/240V, 50A NEMA 1450 Receptacles, 175A Full power Recptacle -All Circuits Protected Individually -540 PTO Speed -1-3/8" 6 spline shaft | *$3,619.00 |
 | IMD 31 KW PTO GENERATOR KIT
Brand: IMD Model: 31002 Part Number: PTO 31/2S
IMD 31 KW PTO GENERATOR -31000 Watts -Simultaneous 120/240V -Requires minimum 63 PTO Horsepower -Maximum breaker capacity 125A at 240V -Duplex 120V, 20A NEMA 5-20 and Straight Blade 120/240V, 50A NEMA 1450 Receptacles, 175A Full power Recptacle -All Circuits Protected Individually -540 PTO Speed -1-3/8" 6 spline shaft -Package comes with Full Power Plug, PTO Drive Line, and 3-Point Hitch Kit | *$4,309.00 |
 | Imperial 73533 Hitch Pin 5/8"x4-3/4"
Brand: Imperial Model: 73533 Part Number: 73533
"IMPERIAL" HITCH PIN
Heat-Treated Hitch Pin.
Plated.
Pin includes a hairpin cotter.
Swivel handle for easy grasping. | *$11.99 |
| Imperial 73534 Hitch Pin 5/8"x6-1/2"
Brand: Imperial Model: 73534 Part Number: 73534
"IMPERIAL" HITCH PIN
Heat-Treated Hitch Pin.
Plated.
Pin includes a hairpin cotter.
Swivel handle for easy grasping. | *$12.99 |
| Imperial 73535 Hitch Pin 3/4x5"
Brand: Imperial Model: 73535 Part Number: 73535
"IMPERIAL" HITCH PIN
Heat-Treated Hitch Pin.
Plated.
Pin includes a hairpin cotter.
Swivel handle for easy grasping. | *$13.99 |
| Imperial 73537 Hitch PIN 7/8"x7-1/2"
Brand: Imperial Model: 73537 Part Number: 73537
"IMPERIAL" HITCH PIN
Heat-Treated Hitch Pin.
Plated.
Pin includes a hairpin cotter.
Swivel handle for easy grasping. | *$22.99 |
 | Imperial 70197 Insulating Small Snap Bushing 1"dia - Nylon
Brand: Imperial Model: 70197 Part Number: 70197
"IMPERIAL" SNAP BUSHING
Small size
I.D.: 49/64
Head Diameter: 1-1/8
Thickness: 9/16
Panel Hole Diameter: 1
Color: Black
100 per package.
Designed to protect wires, cables, and tubing from rough panel edges.
Employs multiple lock features that snap into place on panels ranging from
1/32 to 1/8 inch thick. | *$43.65 |
 | IMPERIAL 24790 DOUBLE CLEVIS MIDLINK 3/8" (PACK OF 2)
Brand: Imperial Model: 24790 Part Number: 24790
"IMPERIAL" DOUBLE CLEVIS MIDLINK
Double Clevis Mid-Link.
For use with Grade 70 and Grade 40 chain.
Hot forged and heat treated for high strength.
For connecting two lengths of chain together.
Chain Size: 3/8
Working Load Limits: 6,600 lbs.
CAUTION: Working load limits should not | *$49.99 |
| Imperial 70198 Nylon Insulating Snap Bushing 1.187"dia - Medium
Brand: Imperial Model: 70198 Part Number: 70198
"IMPERIAL" SNAP BUSHING
Medium size.
I.D.: 11/16
Head Diameter: 1-9/16
Thickness: 9/16
Panel Hole Diameter: 1-3/16
Color: Black
100 per package.
Designed to protect wires, cables, and tubing from rough panel edges.
Employs multiple lock features that snap into place on panels ranging from
1/32 to 1/8 inch thick. | *$66.59 |
| IMPERIAL 24791 DOUBLE CLEVIS MIDLINK 7/16 -1/2" (PACK OF 2)
Brand: Imperial Model: 24791 Part Number: 24791
"IMPERIAL" DOUBLE CLEVIS MIDLINK 7/16 -1/2"
Double Clevis Mid-Link.
For use with Grade 70 and Grade 40 chain.
Hot forged and heat treated for high strength.
For connecting two lengths of chain together.
Chain Size: 7/16 - 1/2.
Working Load Limits: 11,300 lbs. | *$69.99 |
| Imperial 70199 Nylon Insulating Snap Bushing 1.375 Dia - Large
Brand: Imperial Model: 70199 Part Number: 70199
"IMPERIAL" SNAP BUSHING
Large size.
I.D.: 1
Head Diameter: 1-1/2
Thickness: 9/16
Panel Hole Diameter: 1-3/8
Color: Black
100 per package.
Designed to protect wires, cables, and tubing from rough panel edges.
Employs multiple lock features that snap into place on panels ranging from
1/32 to 1/8 inch thick. | *$74.55 |
| Imperial 73531 Hitch Pin 1/2"x4-3/4"
Brand: Imperial Model: 73531 Part Number: 73531
"IMPERIAL" HITCH PIN
Heat-Treated Hitch Pin.
Plated.
Pin includes a hairpin cotter.
Swivel handle for easy grasping. | *$8.99 |
 | Midwest Air Tech #901153A 3' LD U Sty Fence Post
Brand: Import Model: 901153A Part Number: 901153A
3', Green, Light Duty, U Style, Steel, Fence Post, 14 Gauge. | *$10.46 |
 | 36"x100' 2x1 Weld Wire
Brand: Import Model: 309223a Part Number: 309223A
"MIDWEST" WELDED WIRE
36" x 100'.
2" x 1" Mesh.
Galvanized.
Welded Wire.
14 Gauge. | *$106.48 |
 | 72x100 4x2 14GA Wire
Brand: Import Model: 308314B Part Number: 308314B
72" x 100', 4" x 2" Mesh, Galvanized Welded Wire, 14 Gauge. | *$107.95 |
 | Midwest Air Tech #901175AB 5-1/2' Green T Fence Post
Brand: Import Model: 901175AB Part Number: 901175AB
5-1/2', Green, Studded Tee Fence Post, Rail Steel. | *$11.02 |
 | Midwest AIR Tech/import 901212a Green Roll Fence 18"x8'
Brand: Import Model: 901212A Part Number: 901212A
"MIDWEST" GREEN ROLL FENCE
Size : 18" x 8',
Color : Green
Gothic top, pvc coated, folding fence. | *$11.14 |
| Midwest Air Tech #901176AB 6' Green T Fence Post
Brand: Import Model: 901176AB Part Number: 901176AB
6', Green, Studded Tee Fence Post, Rail Steel. 1.25 LB/FT. | *$11.22 |
| Midwest Air Tech #901178AB 6-1/2' Green T Fence Post
Brand: Import Model: 901178AB Part Number: 901178AB
6-1/2', Green, Studded Tee Fence Post, Rail Steel. | *$11.81 |
 | 48x100 4x2 12-12GA Wire
Brand: Import Model: 308322A Part Number: 308322A
48" x 100', 4" x 2" Mesh, Galvanized Welded Wire, 12-1/2 Gauge. | *$113.02 |
 | 48x100 1/4MeshHDW Cloth
Brand: Import Model: 308242B Part Number: 308242B
48" x 100', 1/4" Mesh, Galvanized, Hardware Cloth, 23 Gauge. | *$113.06 |
 | 42" 9-1/2GA Fence Stays
Brand: Import Part Number: 901084A
42", 9-1/2 Gauge, Fence Stays. | *$115.76 |
| 10'2" T Sty Fence Post
Brand: Import Part Number: 901172A
10'2", T Style Fence Post, 1.33 LBFT. | *$12.29 |
