C.R. LAURENCE 0377005 CRL Panther Edger Replacement Spindle Bearing
Brand: C.R. Laurence   Part Number: 0377005
Designed for CRL's Panther Edger This high quality CRL Panther Edger Replacement Spindle Bearing is used on the CRL Panther Edger to support the main spindle when in operation. Replacement can be accomplished by a qualified mechanic. Bearings are normally replaced as a set but are sold individually.
*$47.46
C.R. LAURENCE L090 CRL 5/8 to 3/4 Shaft Coupler
Brand: C.R. Laurence   Part Number: L090
Used on the Series 200 Upright Sander This CRL 5/8" to 3/4" Shaft Coupler is used on the Series 200 Upright Sander. It is used to adapt the 5/8 inch (16 millimeter) motor shaft to 3/4 inch (19 millimeter) undercut on the one inch (25 millimeter) lower pulley shaft.
*$48.35
C.R. LAURENCE CN0036 CRL Roller Platen for the GL4W or CN4106 Sander
Brand: C.R. Laurence   Part Number: CN0036
Designed for CRL GL4W/CN4106 Sanders This CRL Roller Platen is designed to fit the CRL GL4W or CN4106 (Canadian Model) upright sander as an O.E.M replacement part. It can easily be replaced with common hand tools.
*$481.42
C.R. LAURENCE 39234403 CRL/Somaca 6 Metal Bond Diamond Cup Wheel 140-170 Grit
Brand: C.R. Laurence   Part Number: 39234403
140-170 Grit This Somaca/CRL 6" Metal Bond Diamond Cup Wheel is designed to run at position 2 on Model 761 High Speed Bevelling Machine. Diameter: 6 in (152.4 mm)
*$482.37
C.R. LAURENCE 39234402 Somaca/CRL 6 Position # 1 Metal Bond Diamond Bevel Grinding Wheel 80-100 Grit
Brand: C.R. Laurence   Part Number: 39234402
For Model 761 Straight Line Bevelling Machine This Somaca/CRL 6" Metal Bond Diamond Cup Wheel is mounted at position 1 on the 761 High Speed Beveller. Dimensions: 6 in (152.4 mm) Position : 1
*$498.20
C.R. LAURENCE 2402511 CRL/Somaca 8 x 10 Counterbalanced Tilting Cutting Table With Breaker Bar
Brand: C.R. Laurence   Part Number: 2402511
Indoor/Outdoor Carpet: Cushions Glass and Protects Against Scratches This Somaca/CRL Counterbalanced Tilting Cutting Table is constructed of heavy gauge steel, electrically welded and painted. A full 3/4 inch smooth particle board table top and carpet is included. F.O.B : Cicero, Ill.
*$5,095.66
C.R. LAURENCE EZE2001 CRL E-Z Edgerâ„¢ 220 Volt Glass Edging Machine Only
Brand: C.R. Laurence   Part Number: EZE2001
An Affordable Alernative to Larger Grinding/Polishing Machines Set-up is Fast and Requires Very Little Operator Training 220 Volt Operation Costs Less to Operate CRL is pleased to present an affordable new edging machine designed to produce satin finished edges on glass up to 1/2 inch (12.7 millimeter) thick. This CRL E-Z Edgerâ„¢ Glass Glass Edging Machine makes simple work of edging 10 to 60 inch (254 to 1,524 millimeter) diameter glass and mirror up to 3/8 inch (9.5 millimeter) thick, and 10 to 44 inch (254 to 1,117 millimeter) diameters for glass up to 1/2 inch (12.7 millimeter) thick. The machine features a 1/2 H.P. motor, adjustable coolant nozzles, and special two wheel gang assembly for profile grinding and finishing without having to change wheels. The CRL EZE2000 Edger measures 30 inches long x 18 inches wide x 12 inches high (762 x 457 x 304 millimeters). Column height is 72 inches (1,828 millimeters) High. Machine Only, does not include wheels.
*$5,201.61
C.R. LAURENCE 2402504 CRL/Somaca 8 x 12 Counterbalanced Tilting Cutting Table With Breaker Bar
Brand: C.R. Laurence   Part Number: 2402504
Indoor/Outdoor Carpet: Cushions Glass and Protects Against Scratches This Somaca/CRL Counterbalanced Tilting Cutting Table is constructed of heavy gauge steel, electrically welded and painted. A full 3/4 inch smooth particle board table top and carpet is included. F.O.B : Cicero, Ill.
*$5,216.29
C.R. LAURENCE EZE2K1T CRL E-Z Edgerâ„¢ 110 Volt Glass Edging Machine Kit
Brand: C.R. Laurence   Part Number: EZE2K1T
An Affordable Alernative to Larger Grinding/Polishing Machines Set-up is Fast and Requires Very Little Operator Training Kit Includes Machine, Pump and Two Wheels CRL is pleased to present an affordable new edging machine designed to produce satin finished edges on glass up to 1/2 inch (12.7 millimeter) thick. This CRL E-Z Edgerâ„¢ Glass Glass Edging Machine makes simple work of edging 10 to 60 inch (254 to 1,524 millimeter) diameter glass and mirror up to 3/8 inch (9.5 millimeter) thick, and 10 to 44 inch (254 to 1,117 millimeter) diameters for glass up to 1/2 inch (12.7 millimeter) thick. The machine features a 1/2 H.P. motor, adjustable coolant nozzles, and special two wheel gang assembly for profile grinding and finishing without having to change wheels. The CRL EZE2000 Edger measures 30 inches long x 18 inches wide x 12 inches high (762 x 457 x 304 millimeters). Column height is 72 inches (1,828 millimeters) High. Kit Inlcudes: 110 Volt E-Z Edger 110 Volt Submersible Pump 1/4 Inch (6 millimeter) Glass Fine Pencil Edge Wheel 1/4 Inch (6 millimeter) Glass Polishing Wheel Kit Includes Machine, Pump and Two Wheels
*$5,733.86
C.R. LAURENCE 2402512 CRL/Somaca 8 x 10 Counterbalanced Tilting Cutting Table With Air Flow 12 Outlet
Brand: C.R. Laurence   Part Number: 2402512
Indoor/Outdoor Carpet: Cushions Glass and Protects Against Scratches This Somaca/CRL Counterbalanced Tilting Cutting Table is constructed of heavy gauge steel, electrically welded and painted. A full 3/4 inch smooth particle board table top and carpet is included. F.O.B : Cicero, Ill.
*$5,865.57
C.R. LAURENCE 37668700 CRL/Somaca 1/4 x 1/4 x 2-1/4 Key for Pulley for BM106G Machine
Brand: C.R. Laurence   Part Number: 37668700
Replacement Part for BM106G Wet Abrasive Upright Sander This part is for all (1987 to present) BM106G Wet Abrasive Belt Machines. Item Number on Schematic: 70 Quantity Required Per Machine: 2
*$5.30
C.R. LAURENCE 38128700 CRL/Somaca Locking Washer for BM106G Machine
Brand: C.R. Laurence   Part Number: 38128700
Replacement Part for BM106G Wet Abrasive Upright Sander This part is for all (1987 to present) BM106G Wet Abrasive Belt Machines. Item Number on Schematic: 55 Quantity Required Per Machine: 1
*$5.39
C.R. LAURENCE 37668800 CRL/Somaca 3/16 x 3/16 x 1-1/2 Key for BM106G Machine
Brand: C.R. Laurence   Part Number: 37668800
Replacement Part for BM106G Wet Abrasive Upright Sander This part is for all (1987 to present) BM106G Wet Abrasive Belt Machines. Item Number on Schematic: 72 Quantity Required Per Machine: 2
*$5.45
C.R. LAURENCE 39700001 Somaca/CRL VE1P Dial Indicator Positioning System
Brand: C.R. Laurence   Part Number: 39700001
Option for VE1P Edger Somaca/CRL VE1P Dial Indicator Positioning System is an option that will allow you quickly reposition from one wheel size to the next, accurately everytime.
*$507.76
C.R. LAURENCE LN3 CRL Spray Nozzle for Upright Belt Sanders
Brand: C.R. Laurence   Part Number: LN3
Used on All Model 200 2000 Sanders Makes Sanding Cooler and Faster This CRL Spray Nozzle for Belt Sanders is used to spray water on belts. Water spray makes sanding cooler and faster, reduces sanding dust and belt wear.
*$51.86
C.R. LAURENCE 46205882 Somaca/CRL VE 1/2 Board Dressing Plate 100 Grit
Brand: C.R. Laurence   Part Number: 46205882
100 Grit Somaca/CRL VE4 1/2" Board Dressing Plate is 100 Grit and measures 8 x 6 inches (203.2 x 152.4 millimeters). Grit: 100
*$53.31
C.R. LAURENCE 30118702 CRL/Somaca Roller Shaft for BM106G Machine
Brand: C.R. Laurence   Part Number: 30118702
Replacement Part for BM106G Wet Abrasive Upright Sander This part is for all (1987 to present) BM106G Wet Abrasive Belt Machines. Item Number on Schematic: 44 Quantity Required Per Machine: 1
*$53.99
C.R. LAURENCE 39617200 Somaca/CRL 7 Flat and Small Seam Edge Grinding Wheel 170-200 Grit for 1/4 Glass
Brand: C.R. Laurence   Part Number: 39617200
170-200 Grit Somaca/CRL Grinding Wheels are available for 1/8 to 3/4 inch (3 to 19 millimeter) thick glass and grits from 120 to 270. Dimensions: 7 in (178 mm)
*$530.98
C.R. LAURENCE 36443205 Somaca/CRL VE2 Plus 2/VE4 Pencil Edge 170-200 Grit Grinding Wheel for 1/8 to 1/4 Glass
Brand: C.R. Laurence   Part Number: 36443205
170-200 Grit This Somaca/CRL 7" Diamond Wheel will grind a pencil edge profile on 1/8 to 1/4 inch (3 to 6 millimeter) glass and is designed to run on these edging machines: VEA1, VEM1, VE2, VE2PLUS2, VE4 (position 2), and VE4PLUS1 (position 2). Dimensions: 7 in (178 mm)
*$536.51
C.R. LAURENCE 36443213 Somaca/CRL VE-1P Pencil Edge Wheel for 1/8 to 1/4 Glass
Brand: C.R. Laurence   Part Number: 36443213
Spindle Peripheral Edger Wheel for VE1P, and PE11 Edgers This Somaca/CRL 7" Diamond Wheel will grind a pencil edge profile on 1/8 to 1/4 inch (3 to 6 millimeter) glass and is designed to run on these edging machines: VE1P, and PE11. Dimensions: 7 in (178 mm) Grit: 140-170
*$536.61
C.R. LAURENCE 0377036 CRL Panther Edger Height Adjustment Handle
Brand: C.R. Laurence   Part Number: 0377036
Designed for CRL's Panther Edger This CRL Height Adjustment Handle raises and lowers the diamond wheel on the CRL Panther Edger . The black plastic knob with brass shaft easily attaches to the height adjustment linkage.
*$55.70
C.R. LAURENCE 38533510 Somaca/CRL VE-1P Flat and Seam Edge Wheel for 1/8 to 1/4 Glass
Brand: C.R. Laurence   Part Number: 38533510
Spindle Peripheral Edger Wheel for VE1P Edger This Somaca/CRL 7" Diamond Wheel will grind a flat and seam profile on 1/8 to 1/4 inch (3 to 6 millimeter) glass and is designed to run on the VE1P edging machine. Dimensions: 7 in (178 mm) Grit: 140-170
*$554.54
C.R. LAURENCE CN0012 CRL 115 Volt Motor for the GL4W or CN4106 Sander
Brand: C.R. Laurence   Part Number: CN0012
Designed to Fit the CRL GL4W/CN4106 Sanders This CRL 115 Volt Motor is designed to fit the CRL GL4W or CN4106 (Canadian Model) upright sander as an O.E.M replacement part. The heavy-duty, 1 HP motor runs at 3450 RPM and can be wired for 230 Volts by a qualified electrician. It carries a one year warranty. Safety Note: Always unplug sander before attempting to replace any parts.
*$555.45
C.R. LAURENCE CN0027 CRL Front Rest Roller Bar for the GL4W or CN4106 Sander
Brand: C.R. Laurence   Part Number: CN0027
Designed for CRL GL4W/CN4106 Sanders This CRL Front Rest Roller Bar is designed to fit the CRL GL4W or CN4106 (Canadian Model) upright sander as an O.E.M replacement part. It can easily be replaced with common hand tools.
*$56.91
C.R. LAURENCE 38533500 Somaca/CRL VE2 Plus 2/VE4 Flat and Seam Edge 170-200 Grit Grinding Wheel for 1/8 to 1/4 Glass
Brand: C.R. Laurence   Part Number: 38533500
170-200 Grit Somaca/CRL VE2 Plus 2 and VE4 Pencil Edge Grinding Wheels are available for 1/8 to 3/4 inch (3 to 19 millimeter) thick glass and grits from 120 to 270. Dimensions: 7 in (178 mm)
*$566.17
C.R. LAURENCE 2621057 CRL Nozzle for Somaca 106 Machines
Brand: C.R. Laurence   Part Number: 2621057
C.R. LAURENCE 2621057 CRL Nozzle for Somaca 106 Machines. This Replacement Nozzle and Holder fit all Somaca 106 Belt Machines..
*$58.19
C.R. LAURENCE 36443201 Somaca/CRL VE4 Pencil Edge 120-140 Grit Grinding Wheel for 1/8 to 1/4 Glass
Brand: C.R. Laurence   Part Number: 36443201
120-140 Grit This Somaca/CRL 7" Diamond Wheel will grind a pencil edge profile on 1/8 to 1/4 inch (3 to 6 millimeter) glass and is designed to run on these edging machines: VE4 (position 1), and VE4PLUS1 (position 1). Dimensions: 7 in (178 mm)
*$594.07
C.R. LAURENCE 38386901 Somaca/CRL 7 Flat and Seam Edge Grinding Wheel 120-140 Grit for 3/16 to 3/8 Glass
Brand: C.R. Laurence   Part Number: 38386901
120-140 Grit Somaca/CRL Grinding Wheels are available for 1/8 to 3/4 inch (3 to 19 millimeter) thick glass and grits from 120 to 270. Dimensions: 7 in (178 mm)
*$594.66
C.R. LAURENCE STT1 CRL Stowaway Glass Cutting Table
Brand: C.R. Laurence   Part Number: STT1
A Great Space Saver in the Shop High-Strength Construction Provides Durability Without Excess Weight 500 lb (225 kg) Load Capacity The Stowaway Glass Cutting Table features a generous work surface of 72-1/4 x 96-1/2 inches (1835 x 2450 millimeters) with a rugged, long-lasting felt top designed to reduce vacuum stick when used for cutting glass or other nonporous materials. High-strength construction provides durability without excess weight. Crossed support legs ensure a rigid and stable, 35 inch (889 millimeter) high work surface with a 500 pound (225 kilogram) load capacity. The scissor-action tilt design of the Stowaway floats the pivot point forward as the top lifts, providing nearly effortless manual tilt, without the extra weight of a counter-balanced system. Bronze pivot bushings and nylon washers make movements smooth and quiet. Rubber rollers support glass, laminate or other sheet materials when tilted and flip out of the way when not needed. Fold up the base section, pull back the stabilizing arm and the base is locked into place, ready to stow or roll. With its compact 25-3/4 inch (656 millimeter) deep x 79-3/4 inch (2028 millimeter) high profile, the Stowaway is easy to stow against a wall, roll along narrow aisles, slip through doorways, and fit on freight elevators. Weighing only 337 pounds (153 kilograms), it can even be lifted into the back of a truck for transport to a jobsite. Used as a rack for glass or other sheet materials, the Stowaway can be loaded from the front or from the side. Sheets roll easily and gently across the rubber support rollers. Some assembly required. F.O.B : Laurel, Montana
*$6,166.04
C.R. LAURENCE 2402550 CRL/Somaca 8 x 10 Counterbalanced Tilting Cutting Table With Air Flow 16 Outlet
Brand: C.R. Laurence   Part Number: 2402550
Indoor/Outdoor Carpet: Cushions Glass and Protects Against Scratches This Somaca/CRL Counterbalanced Tilting Cutting Table is constructed of heavy gauge steel, electrically welded and painted. A full 3/4 inch smooth particle board table top and carpet is included. F.O.B : Cicero, Ill.
*$6,845.68
C.R. LAURENCE 2402503 CRL/Somaca 8 x 12 Counterbalanced Tilting Cutting Table With Breaker Bar and Air Flow 12 Outlet
Brand: C.R. Laurence   Part Number: 2402503
Indoor/Outdoor Carpet: Cushions Glass and Protects Against Scratches This Somaca/CRL Counterbalanced Tilting Cutting Table is constructed of heavy gauge steel, electrically welded and painted. A full 3/4 inch smooth particle board table top and carpet is included. F.O.B : Cicero, Ill.
*$6,911.55
C.R. LAURENCE 30118800 CRL/Somaca Open Cover Plate for BM106G Machine
Brand: C.R. Laurence   Part Number: 30118800
Replacement Part for BM106G Wet Abrasive Upright Sander This part is for all (1987 to present) BM106G Wet Abrasive Belt Machines. Item Number on Schematic: 47 Quantity Required Per Machine: 1
*$6.09
C.R. LAURENCE 30017000 CRL/Somaca Closed Cover Plate for BM106G Machine
Brand: C.R. Laurence   Part Number: 30017000
Replacement Part for BM106G Wet Abrasive Upright Sander This part is for all (1987 to present) BM106G Wet Abrasive Belt Machines. Item Number on Schematic: 48 Quantity Required Per Machine: 1
*$6.44
C.R. LAURENCE 38616602 Somaca/CRL 8 Diamond Wheel 1/8 to 1/4 Pencil Edge
Brand: C.R. Laurence   Part Number: 38616602
For Model 761 and Compu-Bevel 11 Machines This Somaca/CRL 8" Metal Bond Diamond Wheel is designed to run at Position #3 on Model 761, Position #4 on the Compubevel 11.
*$602.68
 C.R. LAURENCE 0377729 CRL Panther Edger Back Support Roller Bar
Brand: C.R. Laurence   Part Number: 0377729
Used Exclusively on the CRL Panther Edger The CRL Panther Edger Back Support Roller Bar can be used as an additional support for your CRL Panther Edger or can be used in conjunction with the CRL Panther Height Extension Kit . Wheels are adjustable for spacing and removable if necessary.
*$62.52
C.R. LAURENCE 0377010 CRL Panther Edger Motor Assembly
Brand: C.R. Laurence   Part Number: 0377010
Designed for CRL's Panther Edger This motor is the workhorse of the CRL Panther Edging Machine. This one horsepower, single phase motor lasts almost indefinitely. Stocked and shipped out of Los Angeles only. Minimum Order: 1 Each
*$649.15
C.R. LAURENCE 0377034 CRL Panther Edger Brass Nut
Brand: C.R. Laurence   Part Number: 0377034
Designed for CRL's Panther Edger This heavy CRL Brass Nut secures the diamond wheel and polishing wheel to the Panther Glass Edger . The solid brass material resists corrosion, preventing it from becoming "frozen" onto the spindle shaft. Always use the correct wrench to tighten to avoid stripping.
*$65.08
C.R. LAURENCE 46205883 Somaca/CRL VE 3/4 Board Dressing Plate 120 Grit
Brand: C.R. Laurence   Part Number: 46205883
120 Grit Somaca/CRL VE 3/4" Board Dressing Plate is 120 Grit and measures 8 x 6 inches (203.2 x 152.4 millimeters). Grit: 120
*$65.80
C.R. LAURENCE 47001710 Somaca/CRL Small Parts Table for Rotary Sealing Table
Brand: C.R. Laurence   Part Number: 47001710
Ideal for Working on Small I.G. Units The small parts table adapter is a metal plate that fits over the two suction cups on top of Cat. No. 470017000 Rotary Sealing Table. It has a pedestal mounted single suction cup that can be used to hold small IG units for sealing. It rotates with the main table so the operator can stay in one place while working on small pieces.
*$655.02
C.R. LAURENCE 38709701 Somaca/CRL VE4 Flat and Seam Edge 120-140 Grit Grinding Wheel for 1/4 to 1/2 Glass
Brand: C.R. Laurence   Part Number: 38709701
120-140 Grit Somaca/CRL VE4 Flat and Seam Edge Grinding Wheels are available for 1/8 to 3/4 inch (3 to 19 millimeter) thick glass and grits from 120 to 325. Dimensions: 7 in (178 mm)
*$663.93
C.R. LAURENCE 36881012 Somaca/CRL VE-1P Pencil Edge Wheel for 3/16 to 3/8 Glass
Brand: C.R. Laurence   Part Number: 36881012
Spindle Peripheral Edger Wheel for VE1P and PE11 Edgers This Somaca/CRL 7" Diamond Wheel will grind a pencil edge profile on 1/8 to 1/4 inch (3 to 6 millimeter) glass and is designed to run on these edging machines: VE1P, and PE11. Dimensions: 7 in (178 mm) Grit: 140-170
*$664.84
C.R. LAURENCE 38404900 Somaca/CRL VE2 Plus 2/VE4 Pencil Edge 170-200 Grit Grinding Wheel for 1/4 to 1/2 Glass
Brand: C.R. Laurence   Part Number: 38404900
170-200 Grit This Somaca/CRL 7" Diamond Wheel will grind a pencil edge profile on 1/4 to 1/2 inch (6 to 12 millimeter) glass and is designed to run on these edging machines: VE2, VE2PLUS2, VE4 (position 2), and VE4PLUS1 (position 2). Dimensions: 7 in (178 mm)
*$665.51
C.R. LAURENCE 38404909 Somaca/CRL VE-1P Pencil Edge Wheel for 1/4 to 1/2 Glass
Brand: C.R. Laurence   Part Number: 38404909
Spindle Peripheral Edger Wheel for VE1P Edger This Somaca/CRL 7" Diamond Wheel will grind a pencil edge profile on 1/4 to 1/2 inch (6 to 12 millimeter) glass and is designed to run on these edging machines: PE11, and VE1P. Dimensions: 7 in (178 mm) Grit: 140-170
*$666.15
C.R. LAURENCE 2621043 CRL/Somaca Eccentric and Pulley Assembly
Brand: C.R. Laurence   Part Number: 2621043
Most Models of 106E and G Sanders This Replacement Eccentric and Pulley Assembly controls belt tension on Somaca 106E and G belt machines, and is a conversion for older models, except 106-FB 12RP.
*$669.67
C.R. LAURENCE 46207216 CRL/Somaca Replacement Felt Ring for 39415200
Brand: C.R. Laurence   Part Number: 46207216
Replacement Felt Ring for 39415200 Assembly Somaca/CRL Replacement Felt Ring is available for position #6 felt narrow face bevel polisher assembly #39415200. Diameter: 6 in (152 mm)
*$67.28
CRL 6" Diamond Glass Saw
Brand: C.R. Laurence   Part Number: T6
Heavy-Duty, Sturdy Construction Rustproof Tank   Make straight and square cuts accurately and quickly with this CRL Diamond Saw. The saw works best on glass 1/4 inch (6.4 millimeter) thick, but can cut glass up to 1-1/2 inches (38 millimeters) thick. It is great for cutting super-hard cathedral glass or bullet-proof glass laminate strips up to five inches (127 millimeters) wide. The Blade has a diamond impregnated edge for neat, smooth cuts. There is also a solid plastic table top cutting surface measuring 15 by nine inches (381 by 229 millimeters) and unbreakable plastic drip tank which cleans out easily.   Additional Product Information: Specifications: 1/4 Horsepower Motor RPM - Variable from 400 to 3,400 110 Volts AC   Important Note: Diamond Blades not included with saw, and must be ordered separately.  
*$674.24
C.R. LAURENCE 38386909 Somaca/CRL VE-1P Flat and Seam Edge Wheel for 3/16 to 3/8 Glass
Brand: C.R. Laurence   Part Number: 38386909
Spindle Peripheral Edger Wheel for VE1P and PE11 Edgers This Somaca/CRL 7" Diamond Wheel will grind a flat and seam edge profile on 3/16 to 3/8 inch (5 to 10 millimeter) glass and is designed to run on these edging machines: VE1P, and PE11. Dimensions: 7 in (178 mm) Grit: 140-170
*$683.94
C.R. LAURENCE 38404901 Somaca/CRL VE4 Pencil Edge 120-140 Grit Grinding Wheel for 1/4 to 1/2 Glass
Brand: C.R. Laurence   Part Number: 38404901
120-140 Grit This Somaca/CRL 7" Diamond Wheel will grind a pencil edge profile on 1/4 to 1/2 inch (6 to 12 millimeter) glass and is designed to run on these edging machines: VEA1, VEM1, VE4 (position 1), and VE4PLUS1 (position 1). Dimensions: 7 in (178 mm)
*$686.95
C.R. LAURENCE 3723120 CRL/Somaca 120X Rubber Polishing Wheel for 1/2 to 3/4 Glass
Brand: C.R. Laurence   Part Number: 3723120
For SBE1 Shape Beveller Machine Somaca/CRL SBE1 Polishing Wheels are available from 60 to 400 grits for glass up to 1 inch (25 millimeter) thick. Dimensions: 6 in x 9/16 in (152.4 x 14.2 mm)
*$69.53
C.R. LAURENCE 36881001 Somaca/CRL VE4 Pencil Edge 140-170 Grit Grinding Wheel for 3/16 to 3/8 Glass
Brand: C.R. Laurence   Part Number: 36881001
140-170 Grit This Somaca/CRL 7" Diamond Wheel will grind a pencil edge profile on 3/16 to 3/8 inch (5 to 10 millimeter) glass, and is designed to run on the VEA1 and VEM1 Edgers. Dimensions: 7 in (178 mm)
*$693.18
 
eBay Results
 TitlePriceShippingTotalCurrencyTime Left
New Holland 1033 Bale Wagon-Loads and unloads 104 bales4800.000.004800.00USD 30 minutes 38 seconds
Planter Insecticide Calibration Machine645.0040.00685.00USD 32 minutes 28 seconds
post hole digger auger knive knife blades 5.004.959.95USD 1 hour 25 minutes 16 seconds
post hole digger spiral point auger bit26.0010.7036.70USD 1 hour 25 minutes 59 seconds
dale phillips equipment 5' land razor box blade leveler650.000.00650.00USD 1 hour 27 minutes 32 seconds
TomCat TC-650 3-point backhoe 6'6" digging depth3499.000.003499.00USD 1 hour 31 minutes 57 seconds
Drawbar / Towbar assembly * New in original box *60.000.0060.00USD 1 hour 51 minutes 17 seconds
New Holland 570 Baler *Excellent Condition*15500.000.0015500.00USD 2 hours 20 minutes 26 seconds
New Holland 1410 Swather *Excellent Condition*16500.000.0016500.00USD 2 hours 21 minutes 13 seconds
fanning mill antique seed sorter275.001.00276.00USD 2 hours 26 minutes 14 seconds
ATV TRAILER WAGON DUMP BED GARDEN UTILITY 7550 ATV1084.000.001084.00USD 2 hours 38 minutes 44 seconds
John Deere 2 Row 3 Point Corn Planter NR660.650.00660.65USD 2 hours 38 minutes 48 seconds
ATV TRAILER WAGON DUMP BED GARDEN UTILITY 5450 ATV625.000.00625.00USD 2 hours 38 minutes 52 seconds
HORSE MANURE SPREADER GROUND DRIVEN TRAILER 12002465.000.002465.00USD 2 hours 38 minutes 59 seconds
HORSE ARENA HARROW,DRAG, RAKE.LANDSCAPE,ATV 5FT385.000.00385.00USD 2 hours 39 minutes 13 seconds
HORSE MANURE SPREADER GROUND DRIVEN TRAILER,ATV 6001199.000.001199.00USD 2 hours 39 minutes 19 seconds
UTILITY TRACTOR TRAILER WAGON 2-TON LAWN GARDEN 85001460.000.001460.00USD 2 hours 39 minutes 30 seconds
John Deere Fiberglass Seed Hopper 86.000.0086.00USD 3 hours 4 minutes 36 seconds
NW Black Big Boy Tractor Seat A-BBS108BL Extendable Arm214.9936.00250.99USD 3 hours 13 minutes 3 seconds
NEW Blue Big Boy Tractor Seat A-BBS108BU Extendable Arm214.9936.00250.99USD 3 hours 18 minutes 31 seconds
Rain Bird Brass Sprinklers Model # 30H36.5010.7047.20USD 3 hours 21 minutes 6 seconds
Hypro D30 Medium Pressure 2 Diaphram Pump549.990.00549.99USD 3 hours 21 minutes 20 seconds
Rain Bird Brass Sprinklers Model # 30H36.5010.7047.20USD 3 hours 22 minutes 1 second
Big Boy Yellow Tractor Seat A-BBS108YL Extendable Arms214.9936.00250.99USD 3 hours 27 minutes 6 seconds
NEW John Deere Tractor Combine Seat A-CSA2001-20 Black400.9936.00436.99USD 3 hours 31 minutes 34 seconds
large plow point potato ditch 20.0115.0035.01USD 3 hours 49 minutes 32 seconds
John Deere 70, 71 flex, 24B, 25B corn planter hopper31.0018.0049.00USD 3 hours 49 minutes 47 seconds
Old manure spreader,complete needs a little work100.000.99100.99USD 3 hours 51 minutes 44 seconds
Agtec 3pt airblast fruit/vegetable sprayer model 30046900.000.006900.00USD 4 hours 5 minutes 58 seconds
Hutchinson Electeic 8"X30' Grain Auger500.000.00500.00USD 4 hours 14 minutes 49 seconds
1 Ton Chain Hoist Pulley Auto Farm Hoisting NEW19.4310.3529.78USD 4 hours 16 minutes 40 seconds
1000 GAL. FUEL / WATER STORAGE TANK WITH TRAILER720.000.00720.00USD 4 hours 44 minutes 37 seconds
MC Gill Soil Pulverizer #7F8 Horse ArenaFine Grade 577.000.00577.00USD 4 hours 45 minutes 32 seconds
NEW John Deere Back Cushion 350 450 450B 450C 550 Black79.9912.0091.99USD 4 hours 47 minutes 56 seconds
PLANET JR. PLANTER USED39.9925.0064.99USD 4 hours 52 minutes 47 seconds
NEW White Oliver Mpl Moline Seat Back Cushion Black25.9912.0037.99USD 4 hours 54 minutes 31 seconds
INTERNATIONAL HORSE DRAWN FARM MACHINERY - 1947.... I-H8.994.0012.99USD 4 hours 58 minutes 33 seconds
Flexpoint Exp G-neck 3 Point Tractor Hitch Receiver285.0045.00330.00USD 5 hours 44 seconds
NEW Back Cushion for Hyd. Seat BLK/WHT A-400689R3-594.9913.00107.99USD 5 hours 1 minute 13 seconds
FORK ATTACHMENT FOR FORKLIFT/SKIDSTEER 79.950.0079.95USD 5 hours 1 minute 55 seconds
Ford New Holland Tractor Seat Back Cushion A-DDNA401-844.9912.0056.99USD 5 hours 7 minutes 1 second
New Holland 851 round baler2000.000.002000.00USD 5 hours 10 minutes 47 seconds
3 - POINT RECEIVER HITCH W/ CLEVIS DRAWBAR ATTACHMENT 85.000.0085.00USD 5 hours 16 minutes 39 seconds
NEW RIPPER/SUBSOILER & ATTACHMENT FOR 2" HITCH RECEIVER85.000.0085.00USD 5 hours 16 minutes 42 seconds
case plow105.500.00105.50USD 5 hours 22 minutes 16 seconds
Flexpoint 3 Point Tractor Hitch Receiver CATAGORY 1 / 2189.0035.00224.00USD 5 hours 26 minutes 52 seconds
5166 P/N Frazer Rototiler Magneto Rotor Thrust Bearing 7.505.0012.50USD 5 hours 28 minutes 53 seconds
3 point hitch used harley rake 6 feet1800.000.001800.00USD 5 hours 29 minutes 19 seconds
Used 4' Sweeper/Broom, PTO-Chain Drive Nice Brushes (8)400.000.00400.00USD 5 hours 39 minutes 5 seconds
Used 5' Sweeper/Broom, PTO-Chain Drive Nice Brushes (8)400.000.00400.00USD 5 hours 39 minutes 43 seconds
 
Previous Page   Next Page
Jump to page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27
Get eBay search results without all the crap at www.theDeCrapifier.com