C.R. LAURENCE 37028600 CRL/Somaca Electric Junction Box Cover for BM106G Machine
Brand: C.R. Laurence   Part Number: 37028600
Replacement Part for BM106G Wet Abrasive Upright Sander This part is for all (1987 to present) BM106G Wet Abrasive Belt Machines. Item Number on Schematic: 63 Quantity Required Per Machine: 1
*$15.83
C.R. LAURENCE CRP7 CRL Axle for the CRP6 Roller
Brand: C.R. Laurence   Part Number: CRP7
Used on the No. 200 Sander This CRL Axle for the Front Rest Replacement Roller is used on the Model 200 Sander. The front rest roller and axle with grease fitting supports glass during sanding. Roller and axle may also be used on some Somaca sanders.
*$15.97
C.R. LAURENCE 30016600 CRL/Somaca Lower Pulley for BM106G Machine
Brand: C.R. Laurence   Part Number: 30016600
Replacement Part for BM106G Wet Abrasive Upright Sander This part is for all (1987 to present) BM106G Wet Abrasive Belt Machines. Item Number on Schematic: 58 Quantity Required Per Machine: 1
*$151.73
C.R. LAURENCE 2621066 CRL Upper Pulley for 106FB and 106E G Somaca Sanders
Brand: C.R. Laurence   Part Number: 2621066
Series 106 Sanders This Replacement Upper Pulley fits 106FB and 106E G Models of 106 Series Sanders.
*$151.78
CRL 14" x 5/8" Replacement Grinding Wheel
Brand: C.R. Laurence   Part Number: BW14
Used on CRL Finger Pull Machines The CRL Finger Pull Machine uses this Replacement Grinding Wheel for cutting grooves in glass. Easily replaced with simple hand tools. Can be used on either the FP1 or the old style FP514 Finger Pull Machine.
*$153.38
C.R. LAURENCE 20040 CRL Upper Pulley for the 200 and 2000 Sander
Brand: C.R. Laurence   Part Number: 20040
Fits All 200 2000 Belt Machines This cast iron CRL Upper Pulley is to be used in conjunction with two 1100KR bearings on the 200 and 2000 Series Sanders.
*$154.10
C.R. LAURENCE 2622028 CRL Upper / Lower Pulley for Specific Model Somaca Sanders
Brand: C.R. Laurence   Part Number: 2622028
Upper Pulley for Model 106C, 1968 Thru 1983 This Replacement Pulley is a Upper Pulley for Model 106C 1968 Thru 1983, and Lower Pulley for All Models of 106 Series Sanders.
*$155.55
C.R. LAURENCE 30189200 CRL/Somaca Upper Pulley for BM106G Machine
Brand: C.R. Laurence   Part Number: 30189200
Replacement Part for BM106G Wet Abrasive Upright Sander This part is for all (1987 to present) BM106G Wet Abrasive Belt Machines. Item Number on Schematic: 45 Quantity Required Per Machine: 1
*$157.55
C.R. LAURENCE 35587400 CRL/Somaca Roller Support Frame for BM106G Machine
Brand: C.R. Laurence   Part Number: 35587400
Replacement Part for BM106G Wet Abrasive Upright Sander This part is for all (1987 to present) BM106G Wet Abrasive Belt Machines. Item Number on Schematic: 4 Quantity Required Per Machine: 1
*$157.84
Somaca/CRL Grease Fitting Alemite No. 1743B and Shoulder Screw for BM106G Machine
Brand: C.R. Laurence   Part Number: 36988803
Replacement Part for BM106G Wet Abrasive Upright Sander This part is for all (1987 to present) BM106G Wet Abrasive Belt Machines. Item Number on Schematic: 12 Quantity Required Per Machine: 5
*$16.08
CRL 3" Front Rest Roller for the GL4W or CN4106 Sander
Brand: C.R. Laurence   Part Number: CN0025
Front Rest Roller Designed for CRL GL4W/CN4106 Sanders This CRL 3" Front Rest Roller is designed to fit the CRL GL4W or CN4106 (Canadian Model) upright sander as an O.E.M replacement part. It can easily be replaced with common hand tools
*$16.15
C.R. LAURENCE CRP6 CRL Front Rest Replacement Roller for the 200 Sander
Brand: C.R. Laurence   Part Number: CRP6
Used on the No. 200 Sander This CRL Front Rest Replacement Roller is used on the Model 200 Sander. The front rest roller and axle with grease fitting supports glass during sanding. Roller and axle may also be used on some Somaca sanders.
*$16.78
C.R. LAURENCE 2200SS CRL Belt Guard Safety Shield for the 2200, 2200RP and AU22 Upright Belt Sander
Brand: C.R. Laurence   Part Number: 2200SS
Gives Added Protection for the Operator O.S.H.A. Recommended Easy Bolt-On Installation to Your Existing 2200RP, 2200 or AU22 Upright Wet Belt Sander The CRL Belt Guard Safety Shield for the 2200, 200RP and AU22 Upright Belt Sander protects your face and eyes from flying debris, giving you an added degree of safety. The 2200SS is standard equipment on the new CRL 2200 , CRL 2200RP and CRL AU22 Sanders. It can also be retro-fitted on older 2200, 2200RP and AU22 Model Sanders. For safety, this is an attachment no shop should be without. This new addition to our line of sanders offers the piece of mind you need when working with power tools such as the 2200, 2200RP and AU22 Upright Sanders. One each per package. Follow all safety precautions when operating machinery. Failure to do so can result in injury. Height: 18 in (457.2 mm) Width: 6 in (152.4 mm)
*$160.48
C.R. LAURENCE 38779401 Somaca/CRL VE4 Glass Polish/Spindle 3 for 1/4 to 3/4 Glass
Brand: C.R. Laurence   Part Number: 38779401
9R Grit Somaca/CRL VE4 Glass Polish/Spindle 3 are available for 1/4 to 3/4 inch (6 to 19 millimeter) thick glass and 3/8 to 3/4 inch (10 to 19 millimeter) thick glass. Dimensions: 8 in (203.2 mm)
*$161.80
C.R. LAURENCE PAE200 CRL Platen Adapter Extension
Brand: C.R. Laurence   Part Number: PAE200
Use in Conjunction with PA100 to Create a Double Roller Platen Assembly for 100BM or 2200RP Sanders This CRL Platen Adapter Extension bolts to the top of the Platen Adapter to hold a second roller platen behind belt.
*$163.20
C.R. LAURENCE 2623518 CRL 10 Glastar Tri-Star Saw and Blade
Brand: C.R. Laurence   Part Number: 2623518
Three Functions In One Tool This CRL Glastar Tri-Star 8" Glass Grinder and 10" Saw is a versatile tool that enables you to do three jobs. On the left side you can mount a diamond glass grinding wheel up to eight inches (203.2 millimeters) in diameter. On the right side, you can mount an 8 inch (203.2 millimeter) grinding disc or felt polishing wheel. And for glass cutting, a 10 inch (254 millimeter) saw blade can be mounted, along with the table attachment. The machine is furnished with four miter guides. Wheels, discs, blades and saw table must be ordered separately. DIMENSIONS: 20 L x 12 D x 10 H inches (508 x 304.8 x 254 millimeters) F.O.B : Los Angeles, Ca.
*$164.14
C.R. LAURENCE EZE942C CRL E-Z Edgerâ„¢ 1/4 Glass Polishing Wheel
Brand: C.R. Laurence   Part Number: EZE942C
Used Exclusively for the E-Z Edgerâ„¢ This CRL E-Z Edgerâ„¢ Polishing Wheel is used on CRL E-Z Edger Polishing Machines for the polishing of circular glass. Use CRL Sharpening Stones to remove any type of glaze and to expose fresh diamonds on your wheels.
*$166.42
C.R. LAURENCE EZE942E CRL E-Z Edgerâ„¢ 3/8 Glass Polishing Wheel
Brand: C.R. Laurence   Part Number: EZE942E
C.R. LAURENCE EZE942E CRL E-Z Edgerâ„¢ 3/8 Glass Polishing Wheel. This CRL Glass Polishing Wheel wheel is used on the CRL EZ Edger for polishing glass circles. The wheel material will leave you with a smooth, polished finish. CRL Polishing Wheels should never be run dry. The proper coolant mixture is needed to keep your wheel in optimum operating conditions. This wheel is softer than its diamond counterpart, therefore it will wear faster..
*$169.40
C.R. LAURENCE 30189700 CRL/Somaca Bearing Housing for BM106G Machine
Brand: C.R. Laurence   Part Number: 30189700
Replacement Part for BM106G Wet Abrasive Upright Sander This part is for all (1987 to present) BM106G Wet Abrasive Belt Machines. Item Number on Schematic: 20 Quantity Required Per Machine: 1
*$169.95
C.R. LAURENCE 33986 CRL 8 Plain Steel Disc
Brand: C.R. Laurence   Part Number: 33986
C.R. LAURENCE 33986 CRL 8 Plain Steel Disc. Used on the CRL Glastar Studio Beveling System, this plain CRL Steel Disc functions as a backing plate only. Four different types of finishing pads mount to this steel plate with pressure sensitive adhesive. The system is supplied with four steel discs, many shops keep extra discs around for their extra diamond pads..
*$17.10
C.R. LAURENCE 35667200 CRL/Somaca Bearing Cap for BM106G Machine
Brand: C.R. Laurence   Part Number: 35667200
Replacement Part for BM106G Wet Abrasive Upright Sander This part is for all (1987 to present) BM106G Wet Abrasive Belt Machines. Item Number on Schematic: 9 Quantity Required Per Machine: 1
*$17.15
C.R. LAURENCE CN0026 CRL Front Rest Roller Axle for the GL4W or CN4106 Sander
Brand: C.R. Laurence   Part Number: CN0026
Designed for CRL GL4W/CN4106 Sanders This CRL Front Rest Roller Axle is designed to fit the CRL GL4W or CN4106 (Canadian Model) upright sander as an O.E.M replacement part. It can easily be replaced with common hand tools.
*$17.38
C.R. LAURENCE 36957500 CRL/Somaca Junction Box for BM106G Machine
Brand: C.R. Laurence   Part Number: 36957500
Replacement Part for BM106G Wet Abrasive Upright Sander This part is for all (1987 to present) BM106G Wet Abrasive Belt Machines. Item Number on Schematic: 62 Quantity Required Per Machine: 1
*$17.82
C.R. LAURENCE CN0038 CRL Bottom Bracket and Bearing for the GL4W or CN4106 Sander
Brand: C.R. Laurence   Part Number: CN0038
Designed for CRL GL4W/CN4106 Sanders This CRL Bottom Bracket and Bearing is designed to fit the CRL GL4W or CN4106 (Canadian Model) upright sander as an O.E.M replacement part. It can easily be replaced with common hand tools.
*$170.50
C.R. LAURENCE 0377032 CRL Panther Edger Idler Gear
Brand: C.R. Laurence   Part Number: 0377032
Designed for use with CRL's Panther Edger This CRL Idler Gear is used for guiding the drive belt and to make it track correctly, by keeping the proper tension. Gear is made from rolled steel and rides on a bearing. Used on the CRL Panther Edger .
*$178.06
C.R. LAURENCE 3688106 Somaca/CRL Pumice Block
Brand: C.R. Laurence   Part Number: 3688106
4" x 2-1/4" x 2-1/2" This Somaca/CRL Pumice Block is used to redress Diamond Wheels to keep them in top operating condition.
*$18.11
C.R. LAURENCE FP2002 CRL Flat Platen
Brand: C.R. Laurence   Part Number: FP2002
Fits Behind Belt Gives Glass a Flat Edge A CRL Flat Platen is used behind the belt to give glass a flat edge. For use on CRL 2200 Series and 100BM Sanders. Must be inserted into a CRL Platen Adapter on older models not equipped with mounting holes.
*$183.44
C.R. LAURENCE EZE942G CRL E-Z Edgerâ„¢ 1/2 Glass Polishing Wheel
Brand: C.R. Laurence   Part Number: EZE942G
C.R. LAURENCE EZE942G CRL E-Z Edgerâ„¢ 1/2 Glass Polishing Wheel. This wheel is used on the CRL E-Z Edger for polishing glass circles. The wheel material will leave you with a smooth polished finish. CRL Polishing Wheels should never be run dry. A proper water/coolant mixture is needed to keep your wheel in optimum operating conditions. This wheel is softer than its diamond counterpart, therefore it will wear faster..
*$183.60
C.R. LAURENCE BP2001 CRL Bar Platen for the 2200 and 2200RP
Brand: C.R. Laurence   Part Number: BP2001
Fits Behind Belt Gives Glass a Slightly Rounded Edge This CRL Bar Platen is used behind the belt to give glass a slightly rounded edge. Must be inserted into PA100 Platen Adapter located on your Upright Belt Sander .
*$186.43
C.R. LAURENCE 2200720 CRL Single Spray Nozzle for 2200RP
Brand: C.R. Laurence   Part Number: 2200720
Used on All 2200 Series Belt Sanders This CRL Water Spray Nozzle is used on all model 2200 and 2200RP wet belt sanders. Sprays belt with water to cut faster and cooler, reduce belt wear and eliminate sanding dust. Spray nozzle is also used on model 100BM belt sander.
*$19.02
CRL 1/8 to 1/2" Replacement Track Set
Brand: C.R. Laurence   Part Number: 0378816
Used on the CRL Panther Edger This CRL Replacement Track Set allows you to replace worn tracks or simply have tracks which accommodate 1/8 to 1/2 inch (3.2 to 12.7 millimeter) glass in your CRL Panther Edger . Two 5 foot (1.5 meter) sections of high impact plastic track for 1/8, 3/16, 1/4, 3/8 and 1/2 inch (3, 5, 6, 9, 12 millimeter) glass are included in each set.
*$190.36
CRL 62" Replacement Diamond Coated Blade - DTB5000
Brand: C.R. Laurence   Part Number: DTB101
For CRL Diamond Laser Band Saw This CRL Diamond Coated Replacement Blade is designed for use on the CRL DTB5000 Diamond Laser Band Saw .
*$193.16
C.R. LAURENCE 2621004 CRL/Somaca 48 Glass Rest Extension Arm
Brand: C.R. Laurence   Part Number: 2621004
One Piece 48" Extension Arm The 106's rubber roller platen work surface can be increased by the addition of this extension arm. The glass support bar becomes long enough to work the largest pieces of glass a single operator can safely handle. The 48 inch arm can easily replace the existing, standard 24 inch Somaca 106 glass platen rest bar. No hole drilling is required.
*$193.53
C.R. LAURENCE 6105GL CRL One Gallon Glas-Grind
Brand: C.R. Laurence   Part Number: 6105GL
Excellent Quality Coolant for Glass Drilling, Sawing or Beveling This CRL GlassGrind Coolant is developed to provide excellent results for edging, beveling, drilling, sawing and other abrasive working of glass. Specifically designed for the glass industry, GlassGrind will not harden in the bottom of tanks like other coolants.
*$198.00
C.R. LAURENCE BM64B CRL/Somaca 4 x 64 Upright Belt Machine
Brand: C.R. Laurence   Part Number: BM64B
Portable Wet Abrasive Belt Model for Rough Grinding, Smoothing and Polishing Edges of Glass This bench type machine with its streamline styling, rugged construction and low price is ideal for glass fabricators who have only a limited need for edgework capacity. Also, it can be carried on a truck, or to the job site if electricity is available. Machine is designed for use with standard 4 x 64 inch (101.6 x 1625.6 millimeters) abrasive belts. One 120 grit belt is furnished with each unit. The machine is equipped with a 1/2HP, single phase, 1725 rpm motor with a cord and on/off switch. The drive shaft is V-belt powered, and revolves in two ball bearing pillow block units. The eccentric type belt tensioner has a convenient locking handle and a control knob for easy tightening and tracking. Water for wet grinding sprays on the back of the belt from a built-in tank. One pair of safety glasses and a respirator are furnished with each machine. Height: 36 in (914 mm) Depth: 24 in (610 mm) Width: 16 in (406 mm)
*$2,056.57
C.R. LAURENCE 2622300 CRL/Somaca 106 Wet Abrasive Belt Machine With 3M Platen
Brand: C.R. Laurence   Part Number: 2622300
Rough Grinding, Smoothing and Polishing Edges of Glass For Use with 4" x 106" Belts Added Operator Protection Standard Safety Shield Operates on 110 Volts AC There are some quality products that never really get old they just get better as the years pass. This is the case for the world famous Somaca 106" Belt Machine. It's a machine that has been the workhorse and mainstay for most glass shops in the U.S., Canada and throughout the world. Width: 24 in (610 mm) Depth: 23 in (584 mm) Height: 72 in (1829 mm) Additional Product Information: Since 1932, glassworkers have learned to rely on the 106" to fulfill their glass grinding and polishing requirements. Reliability, versatility and durability are the words that best describe this renowned machine. A machine that has been made with pride by American craftsmen for over 70 years, using American-made components. Major Features of the 106 SPECIFICATIONS 106" Abrasive Belt Machine Abrasive Belts This machine uses standard 4" x 106" abrasive belts. One 120 grit belt (CRL4X106120X), one pair of safety glasses, and one approved respirator, (ES8710), are furnished with each machine. A safety shield is mounted to the hood. Motor 1HP, 110/220 volt, 60 cycle, single phase, 3450 RPM, capacitor-type wired to toggle switch, cord and plug. All machines are wired for 110 volts unless otherwise specified. Pulleys (Idler and Driven) 5" diameter, cast iron, machine trued and balanced. Belt Tension Device Eccentric type with locking handle, and control knob for tracking. Platens Available (Choice of One) A. Rubber Contact Platen with 24" long glass rest and five 3" dia. wheels. (2625587). B. 3M Flat Metal Cushioned Platen (optional). (2626674). C. 3M Replacement Pad. (2620099). D. Double Roller (optional). (2628442). Bearings Sealed standard ball bearings throughout in cast iron housings. Coolant System Water line with solenoid
*$2,458.08
C.R. LAURENCE LCS3084 CRL 360 Degree Rotary Work Table
Brand: C.R. Laurence   Part Number: LCS3084
Eliminates Production Steps 2' x 3' (61 cm x 91 cm) Carpeted Surface Holds Units up to 5' x 7' (152 cm x 213 cm) The CRL Rotary Work Table speeds production of Insulating Glass units while creating a safer work place. The glass is held in position by a 6 inch (152 millimeter) vacuum cup on a 2 x 3 foot (61 cm x 91 cm) carpeted surface. Vacuum Cup system is powered by a continuous flow vacuum generator which requires a 35 psi air supply (not supplied) regulated at the table and a 360 degree air driven braking system to stop and hold table in any rotational position. Both the vacuum hold down and braking systems are controlled via tandem foot pedal controls. Swing out support arms expand the top surface to 5 x 7 feet (1,524 x 2,133 millimeters). Work surface height is 36 inches (914 millimeters). Call your CRL Representative or contact us at with additional questions. Always wear the proper protective safety gear including gloves and arm guards when handling glass.
*$2,515.29
C.R. LAURENCE 2200 CRL 4 X 106 Wet Abrasive Belt Sander Without Roller Platen
Brand: C.R. Laurence   Part Number: 2200
New Fiberglass Tank Won't Rust Rugged Construction and a One H.P. Direct-Drive Motor Also Available for Australia with 240 v. 50 Hz. Power Streamlined styling, rugged construction and the affordable price makes our CRL Upright Wet Belt Sander without Platen ideal for use by glass fabricators and processors. The CRL Wet Belt Sander is designed to use the most popular size four by 106 inches (101.6 by 2692.4 millimeters) wet or dry abrasive belts to sand edges to the desired finish. Features of the 2200 Sanding Machine include Direct drive, one H.P., 60 cycle, 110 Volt AC Motor Five Inch (127 millimeter) Diameter Drive Pulley Motor can be wired for 220 Volts at an additional cost. Our New CRL 2200SS Belt Guard Safety Shield helps protect the operator in the event of accidental belt breakage. To solve the problem of water tank spray corrosion, we've replaced the steel tank with a Non-Rusting Fiberglass Water Tank. Securely fastened with six mounting bolts, the tank is trimmed with rugged U-Channel. When you consider all of these features, it's easy to see why glass shops large and small have made the 2200 the glass industry's most popular Upright Belt Sander. For more information, or machine specifications, contact us at (888) 663-9830, or email us here . BELT SELECTION: CRL Wet Abrasive Belts in the four by 106 inch size are recommended for the 2200. The most popular are the: CRL4X106120X 120X Grit Smooth Finish, and Cat. No. CRL4X10680X 80X Grit Rough Finish, but other grits from 36X (Super Coarse) to 600X (Super Fine) are available for this machine, along with Cork Belts for high polishing.
*$2,655.44
C.R. LAURENCE 2622000 CRL/Somaca 106 Wet Abrasive Belt Machine With Roller Platen - 110 Volt
Brand: C.R. Laurence   Part Number: 2622000
Rough Grinding, Smoothing and Polishing Edges of Glass There are some quality products that never really get old – they just get better as the years pass. This is the case for the world famous Somaca 106" Belt Machine. It's a machine that has been the workhorse and mainstay for most glass shops in the U.S., Canada and throughout the world. Since 1932, glassworkers have learned to rely on the 106" to fulfill their glass grinding and polishing requirements. Reliability, versatility and durability are the words that best describe this renowned machine. A machine that has been made with pride by American craftsmen for over 70 years, using American-made components. Height: 72 in (1829 mm) Depth: 23 in (584 mm) Width: 24 in (610 mm)
*$2,719.71
C.R. LAURENCE 2200RP CRL 4 X 106 Wet Abrasive Belt Sander With Roller Platen
Brand: C.R. Laurence   Part Number: 2200RP
Rugged Construction and 1 H.P. Direct-Drive Motor Makes This Our Most Popular Belt Machine Ever Complete with Roller Platen, Front Rest Guide Roller Bar, Belt Guard Safety Shield and Rust-Resistant Fiberglass Water Tank Also Available in a 220 V. 50 Hz. Model for Australia, Cat. No. AU22 Streamlined styling, rugged construction and the affordable price makes our CRL Upright Wet Belt Sander ideal for use by glass fabricators and processors. The CRL Wet Belt Sander is designed to use popular size four inch by 106 inches (101.6 X 2692.4 millimeters) wet or dry abrasive belts to sand edges to the desired finish. Features of the 2200RP Sanding Machine include Direct Drive, One H.P., 60 cycle, 110 Volt AC Motor Five Inch (127 millimeter) Diameter Drive Pulley Fast Belt Changing Mechanism Durable Urethane Covered Roller Platen Front Rest Roller Guide Bar. Belt guard Safety Shield. Electric Water Valve. Non-Rusting Fiberglass Water Tank Motor can be wired for 220 Volts at an additional cost. Our New CRL 2200SS Belt Guard Safety Shield helps protect the operator in the event of accidental belt breakage. To solve the problem of water tank spray corrosion, we've replaced the steel tank with a Non-Rusting Fiberglass Water Tank. Securely fastened with six mounting bolts, the tank is trimmed with rugged U-Channel. When you consider all of these features, it's easy to see why glass shops large and small have made the 2200RP the glass industry's most popular Upright Belt Sander. For more information, or machine specifications, contact us at (888) 663-9830, or email to us at . BELT SELECTION: CRL Wet Abrasive Belts in the four by 106 inch size are recommended for the 2200RP. The most popular are belts are: CRL4X106120X 120X Grit Smooth Finish, and Cat. No. CRL4X10680X 80X Grit Rough Finish, but other grits from 36X (Super Coarse) to 600X (Super Fine) are available for this machine, along with Cork Belts for high polishing.
*$2,724.58
C.R. LAURENCE 2200RP220V CRL 4 X 106 Wet Abrasive 220 Volt Belt Sander With Roller Platen
Brand: C.R. Laurence   Part Number: 2200RP220V
Factory Wired to 220 Volts and Rugged Construction 1 H.P. Direct-Drive Motor Makes This Our Most Popular Belt Machine Ever Complete with Roller Platen, Front Rest Guide Roller Bar, Belt Guard Safety Shield and Rust-Resistant Fiberglass Water Tank Also Available in a 220 V. 50 Hz. Model for Australia, Cat. No. AU22 Streamlined styling, rugged construction and the affordable price makes our CRL Upright Wet Belt Sander ideal for use by glass fabricators and processors. The CRL Wet Belt Sander is designed to use popular size four inch by 106 inch (101.6 X 2,692.4 millimeter) wet or dry abrasive belts to sand edges to the desired finish. Features of the 2200RP include Direct Drive, 1 H.P., 60 cycle, 220 Volt AC Motor Five Inch (127 millimeter) Diameter Drive Pulley Urethane Covered Roller Platen Front Rest Roller Guide Bar. Our New CRL 2200SS Belt Guard Safety Shield helps protect the operator in the event of accidental belt breakage. To solve the problem of water tank spray corrosion, we've replaced the steel tank with a Non-Rusting Fiberglass Water Tank. Securely fastened with six mounting bolts, the tank is trimmed with rugged U-Channel. When you consider all of these features, it's easy to see why glass shops large and small have made the 2200RP the glass industry's most popular Upright Belt Sander. For more information, or machine specifications, contact us at (888) 663-9830, or email to us at . BELT SELECTION: CRL Wet Abrasive Belts in the 4 X 106 inch size are recommended for the 2200RP. The most popular are Cat. No. CRL4X106120X 120X Grit Smooth Finish, and Cat. No. CRL4X10680X 80X Grit Rough Finish, but other grits from 36X (Super Coarse) to 600X (Super Fine) are available for this machine, along with Cork Belts for high polishing. Note: ALL 2200RP220V MACHINES MUST SHIP FROM THE MANUFACTURER IN TEXAS TO THE CUSTOMER'S NEAREST CRL BRANCH - NOT DIRECT FROM THE MANUFACTURER. CUSTOMERS ARE RESPONSIBLE FOR FREIGHT FROM
*$2,760.31
C.R. LAURENCE 0377006 CRL Panther Edger Front Oil Seal
Brand: C.R. Laurence   Part Number: 0377006
Designed for CRL's Panther Edger This CRL Panther Edger Front Oil Seal is used with the CRL Panther Glass Edger. It keeps out contaminants such as dirt and water from the spindle shaft. Replacing this seal should be done by a qualified person who has previous experience with repairing machinery. Minimum Order: 1 Each
*$20.11
C.R. LAURENCE 0377031 CRL Panther Edger Replacement Ribbed Roller Bearing Bushing
Brand: C.R. Laurence   Part Number: 0377031
Designed for CRL's Panther Edger Made for the CRL Panther Edger , this replacement CRL Ribbed Roller Bearing Bushing comes ready to install to help ensure smooth edger operation. Replacement invoves removing the old bearing with a press.
*$20.49
C.R. LAURENCE EWV525 CRL Electric Water Valve
Brand: C.R. Laurence   Part Number: EWV525
Used on All Model 200 2000 Sanders Makes Sanding Cooler and Faster This CRL Electric Water Valve and Spray Nozzle is used to spray water on belts thus reducing sanding dust and belt wear. The valve can be wired to 110 volt sanders.
*$201.62
C.R. LAURENCE 38928304 CRL/Somaca 60X Artifex Polishing Wheel for 1/8 to 3/4 Glass
Brand: C.R. Laurence   Part Number: 38928304
For SBE1 Shape Beveller Machine Somaca/CRL SBE1 Polishing Wheels are available from 60 to 400 grits for glass up to 1 inch (25 millimeter) thick. Dimensions: 6 in x 1 in (152.4 x 25.4 mm)
*$201.96
C.R. LAURENCE CN0004 CRL 115 Volt Solenoid for the GL4W or CN4106 Sander
Brand: C.R. Laurence   Part Number: CN0004
Easy to Replace Designed for the GL4W/CN4106 Sanders This CRL 115 Volt Solenoid is designed to fit the GL4W or CN4106 (Canadian Model) upright sander as an O.E.M replacement part. It can easily be replaced with common hand tools. Safety Note: Always unplug sander before attempting to replace any parts.
*$204.99
C.R. LAURENCE 16100060 CRL/Somaca Toggle Clamp for BM106G Machine
Brand: C.R. Laurence   Part Number: 16100060
Replacement Part for BM106G Wet Abrasive Upright Sander This part is for all (1987 to present) BM106G Wet Abrasive Belt Machines. Item Number on Schematic: 17B Quantity Required Per Machine: 1
*$21.82
C.R. LAURENCE CN0039 CRL Lower Pulley for the GL4W or CN4106 Sander
Brand: C.R. Laurence   Part Number: CN0039
Designed for CRL GL4W/CN4106 Sanders This CRL Lower Pulley is designed to fit the CRL GL4W or CN4106 (Canadian Model) upright sander as an O.E.M replacement part. It can easily be replaced with common hand tools.
*$214.41
C.R. LAURENCE 2000175 CRL Lower Pulley for the 200 and 2000 Sander - 7/8 Arbor
Brand: C.R. Laurence   Part Number: 2000175
Used On Early Model 2000 Sanders Using a Westinghouse Motor This cast iron CRL Lower Pulley has a 7/8 inch (22.2 millimeter) arbor. Used on all early model 2000 Series Sanders using a Westinghouse motor.
*$214.82
C.R. LAURENCE 2622016 CRL 3 Replacement Roller for 106-FB 12-RP Upright Belt Sander
Brand: C.R. Laurence   Part Number: 2622016
For the Somaca 4" x 106" Belt Machine This part is made to fit the Somaca 4" x 106" Upright Belt Sander.
*$22.64
 
eBay Results
 TitlePriceShippingTotalCurrencyTime Left
Auger Mate Gas Powered Portable Hydraulic Power Pack 1025.000.001025.00USD 1 hour 19 minutes 34 seconds
NEW 2010 DELTA STOCK AND CATTLE TRAILER-16' BUMBER PULL3595.000.003595.00USD 1 hour 33 minutes 5 seconds
NEW 2010 DELTA STOCK AND CATTLE TRAILER-16' BUMBER PULL3595.000.003595.00USD 1 hour 37 minutes 44 seconds
LOG SPLITTER, WOOD STOVE, TRACTOR PTO, SKID STEER, NR.240.0023.00263.00USD 1 hour 40 minutes 39 seconds
NEW 2010 20'+5' EQUIPMENT TRAILERS---DUALS---24000 LBS.5895.000.005895.00USD 1 hour 42 minutes 17 seconds
WOODS BELLY MOWER L306 72''250.000.00250.00USD 2 hours 12 minutes 26 seconds
John Deere 460 Front Loader2000.000.002000.00USD 2 hours 15 minutes 17 seconds
IH McCormick No. 200 Manure Spreader3000.000.003000.00USD 3 hours 20 minutes 41 seconds
heavy duty 3 point 6 ft. mulch finisher for tractor1850.000.001850.00USD 3 hours 29 minutes 32 seconds
Hudson Trigger Sprayer4.495.9910.48USD 3 hours 32 minutes 14 seconds
Massey Ferguson 3pt. Hitch Ditcher1543.000.001543.00USD 3 hours 33 minutes 57 seconds
OMNI TRANSFORMER 3 Point Trailer Hitch Platform155.000.00155.00USD 3 hours 36 minutes 24 seconds
heavy duty 3 point 8 ft. rotary tiller tractor tiller1950.000.001950.00USD 3 hours 43 minutes 2 seconds
Loader Forks Bucket Forks Skid Tractor Pallet Fork189.990.00189.99USD 3 hours 49 minutes 54 seconds
JD planter runners9.9922.5032.49USD 4 hours 5 minutes 56 seconds
USED 6 FT BRUSH HOG299.990.00299.99USD 4 hours 17 minutes 41 seconds
sprinkler misc parts full tote10.000.0010.00USD 4 hours 20 minutes 50 seconds
Small Skid Loader Trailer1200.000.001200.00USD 4 hours 21 minutes 50 seconds
4 ft bush hog325.000.00325.00USD 4 hours 24 minutes 52 seconds
hay/meat hook4.005.009.00USD 4 hours 42 minutes 7 seconds
Jacobsen Large Mower Hydraulic Perkins diesel engine4999.000.004999.00USD 5 hours 1 minute 16 seconds
Ground Hog T-4 Trencher 1350.000.001350.00USD
Vintage Seed Spreader Esmay Products, Inc12.999.9922.98USD 5 hours 15 minutes 53 seconds
gandy granular fertlizer drop box w 12 ele motor works85.0035.00120.00USD 5 hours 17 minutes 52 seconds
NEW 4 WD utility 28 HP diesel mower TRACTOR & LOADER8995.000.008995.00USD 5 hours 21 minutes 52 seconds
MITSUBISHI D2300 tractor & LOADER factory refurbished7874.000.007874.00USD 5 hours 21 minutes 53 seconds
NEW 4 WD utility 30 HP diesel TRACTOR & LOADER9995.000.009995.00USD 5 hours 21 minutes 53 seconds
2009 JM454 4 X 4 utility 54 HP diesel TRACTOR & LOADER13995.000.0013995.00USD 5 hours 21 minutes 54 seconds
2009 JM354 4 X 4 utility 35 HP diesel TRACTOR & LOADER11995.000.0011995.00USD 5 hours 21 minutes 56 seconds
MITSUBISHI D2500 tractor & LOADER factory refurbished7995.000.007995.00USD 5 hours 21 minutes 57 seconds
FORKS for kubota deere branson boomer tractor forklift874.000.00874.00USD 5 hours 21 minutes 58 seconds
NEW JM304 4 X 4 utility 30 HP diesel TRACTOR & LOADER9995.000.009995.00USD 5 hours 21 minutes 58 seconds
PTO Shaft, Driveline for Post Hole Diggers 159.000.00159.00USD 5 hours 26 minutes 55 seconds
Stow Cement Mixer 9 Cubic ft Capacity Stone Honda FORK1177.000.001177.00USD 5 hours 27 minutes 14 seconds
MC Gill Soil Pulverizer #7F2 Seedbed Fine Grade 577.000.00577.00USD 5 hours 28 minutes 2 seconds
Leinbach Post Hole Digger Compact Tractor L7200JR Auger699.990.00699.99USD 5 hours 30 minutes 19 seconds
FINN Crimper Krimper Brillion Landpride 777.000.00777.00USD 5 hours 30 minutes 40 seconds
466 John Deere Hay Baler 1999 model 5,897 bales6600.000.006600.00USD 5 hours 31 minutes 9 seconds
HYPRO ROLLER PUMP 1700C NEW59.0012.0071.00USD 5 hours 35 minutes 56 seconds
HYPRO ROLLER PUMP 1700C NEW60.0012.0072.00USD 5 hours 36 minutes 32 seconds
AG SPRAYER, JACTO SAPHIRE AIRBLAST7500.000.007500.00USD 5 hours 37 minutes 46 seconds
HYPRO ROLLER PUMP 6500C NEW57.009.0066.00USD 5 hours 38 minutes 37 seconds
FORKS for kubota deere kioti bobcat IH tractor froklift749.000.00749.00USD 5 hours 46 minutes 1 second
DEGELMAN DOZER/PLOW FRAME1250.000.001250.00USD 5 hours 49 minutes 10 seconds
Lev Alert 540 Bin Level Indicator 300' New No Reserve!13.500.0013.50USD 5 hours 54 minutes 56 seconds
Heavy Duty Alamo 15' Batwing Mower Bush Hog Finishing1800.000.001800.00USD
Hitch Receiver for kubota deere kioti ford IH tractor194.000.00194.00USD 6 hours 13 minutes 8 seconds
NEW OVER THE TIRE STEEL (BOBCAT) SKID STEER TRACKS 1495.000.001495.00USD 6 hours 20 minutes 51 seconds
John Deere 2 Row No Till Food plot planter 3 point 1525.000.001525.00USD 6 hours 25 minutes 23 seconds
MITSUBISHI 2501 30hp TRACTOR LOADER factory refurbished8295.000.008295.00USD 6 hours 27 minutes 30 seconds
 
Previous Page   Next Page
Jump to page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27
Get eBay search results without all the crap at www.theDeCrapifier.com