 | Galv Chain Link Fence gate 4x5
Brand: Fence-Material | *Too low to display |
 | Galv Chain Link Fence Post 2" x 8ft
Brand: Fence-Material | *Too low to display |
| Black Chain Link Fence gate 3x3
Brand: Fence-Material | *Too low to display |
| Black Chain Link Fence gate 4x5
Brand: Fence-Material | *Too low to display |
| White Chain Link Fence gate 4x5
Brand: Fence-Material | *Too low to display |
| Green Chain Link Fence gate 4x6
Brand: Fence-Material | *Too low to display |
| Galv Chain Link Fence gate 3x4
Brand: Fence-Material | *Too low to display |
| Galv Chain Link Fence Post 2" x 7ft
Brand: Fence-Material | *Too low to display |
| White Chain Link Fence gate 3x3
Brand: Fence-Material | *Too low to display |
| White Chain Link Fence gate 6x4
Brand: Fence-Material | *Too low to display |
| Green Chain Link Fence gate 5x4
Brand: Fence-Material | *Too low to display |
| Black Chain Link Fence gate 3x5
Brand: Fence-Material | *Too low to display |
| Green Chain Link Fence Post 2" x 8ft
Brand: Fence-Material | *Too low to display |
 | Blue/Green Electric Fence Polywire - 820'- 9 Wires
Brand: Field Model: 631785 Part Number: 631785
This Blue/Green polywire has 9 wires. This Polywire is for permanent or temporary installations.
It is recommended for wildlife control. Optimally designed for large diameter metal and plastic wires It has excellent resistance to handling and sparking damages. It is suitable for even very high energizers and recommended for difficult conditions such as dry ground, hard to manage animals, deer etc. It comes in rolls of 820 feet and weighs 4.0 lbs per roll. | *$35.00 |
 | Flexpoint 3 Point Hitch Adapter for Category 2 and 3 Tractors
Brand: Flexpoint
Fits larger 50 HP tractors and also has the capability to tow gooseneck trailers. For use with category 2 and 3 tractors. U.S.A. | *$299.99 |
 | Gallagher Power Plus M150 110v
Brand: Gallagher Model: G328504 Part Number: G328504
Gallagher 110 volt energizer has the ability to power up to 60 acres or 11 miles of multi-wire permanent fence. All Gallagher Power Fence Energizers carry a 2-year warranty, including lightning damage. In addition, each carries a 30-day, money-back, customer-satisfaction guarantee | *$111.00 |
 | Garden Auger Bulb Planter for Soil and Earth Heavy Duty 2" diameter
Brand: Garden Auger Model: 2x24HD Part Number: 2x24HD
The 2" diameter Heavy Duty Garden Auger by Custom Auger Systems is the perfect planting auger for smaller bulbs like the crocus or miniature dahlia and gladiolus. Also an excellent tool for drilling pilot holes for tree and fertilizer stakes, and installing termite bait stations.
Features a hardened knife-like cutter blade that slices through harder ground and clay. Designed with three flats on the end of the shaft to keep the auger from slipping in your drill chuck.
Fits household drills 3/8" diameter and larger. Any corded drill provides plenty of power; if using a cordless drill, 18 volts are recommended. | *$35.99 |
 | 48" Woven Willow Edging
Brand: Gardman Part Number: R654
48"L, Woven Willow Edging. | *$68.08 |
 | General Auger Post Hole Digger GXV160 Honda #M330H
Brand: General Auger Part Number: M330H
160CC Honda 4-cycle engine; Base unit, two man operation; Totally-enclosed, oil-lubricated spur gear reduction; All-metal, oil-cooled, automatic centrifugal, clutch slips (does not fully disengage) on overload; Approximately 190 ft. lbs. drilling torque; 1-3/8" hexagon drive shaft connection; For use with the 4400 Series augers and 5500 Series auger extensions only; Auger connections available: General® 1-3/8" hexagon; Ground Hog® 7/8" square; or standard Stihl® connection; Auger sold separately; Warning: To avoid engine damage, always place unit on display stand | *$1,507.50 |
| | General Auger Auger 4-INX36-IN 1 3/8HEX #4400-4E3
Brand: General Auger Part Number: 4400-4E3 | *$194.67 |
 | General Auger Earth Auger/Hole Digger #M660H
Brand: General Auger Model: M660H Part Number: M660H
390CC Honda engine; 8 GPM fixed displacement gear type hydraulic pump, low speed, high torque hydraulic motor direct coupled to the auger; Four way, spring loaded directional control valve; Includes 10 micron return line filter, suction screen and return line diffuser; 276 lbs. at 2000 PSI Max. drilling torque; 144 RPM auger rotation speed; 1 3/8" hexagon standard; Accepts 4400 series augers; 4.80-12 highway use rated tires; Towable | *$5,000.00 |
 | General Auger One Man Auger GX35 Honda #M240-H
Brand: General Auger Part Number: M240-H
Honda GX35 All position, 4 Stroke engine; Centrifugal, all metal, slinge type clutch; 42.5 to 1 reduction ratio; Straight cut, heat treated, spur gear design transmission; Sealed bearings; Accepts 1" round and 1" square hub augers (sold separately) | *$715.50 |
 | General Auger Extension 15-Inf/M330H * #5500-15X
Brand: General Auger Part Number: 5500-15X
300 Series Hole Diggers: OD: NA. Cutting Dia; NA Digging Depth: 15' | *$80.95 |
 | General Auger Coupler,1-3/8FH-7/8-SQ M #6000-4CLR
Brand: General Auger Part Number: 6000-4CLR | *$81.11 |
 | General Equipment M471-20 DIG-R-TACH Hole Digger - Flow: 7-12 GPM
Brand: General Equipment Part Number: M471-12
Flow: 7-12 GPM (27-46 lit/min); pressure range: 1500-3000 PSI. 2 inch hexagon auger connection. For use with 4710 Series augers. | *$1,026.00 |
| | General 753 DIG-R-TACH, SERIES 16: 1330 ft lbs drilling torque @ 2500 PSI hydraulic
Brand: General Equipment Part Number: M753-16
753 DIG-R-TACH, SERIES 16, base drive unit. Used most often with skid steer loaders. Single speed roller chain reduction, high torque geroler type hydraulic motor. 2-9/16 inch round drive shaft connection, 1330 ft lbs drilling torque @ 2500 PSI hydraulic system pressure, stub length connecting hoses. Less hydraulic quick couplers, hose kit, auger and mounting bracket/frame to power source. For use with 6750 Series earth augers and 6780 Series auger extensions. | *$1,325.95 |
 | General 300 Series Hole Diggers: 5.5 HP Honda® GXV160, 7/8 inch square type connection
Brand: General Equipment Part Number: M357H
5.5 HP Honda® GXV160, Stihl type auger connection. For use with the General BT360 Series earth augers and appropriate Stihl earth augers only. | *$1,591.95 |
| | General 300 Series Hole Diggers: 5.5 HP Honda® GXV160, 7/8 inch square type connection
Brand: General Equipment Part Number: M343H
5.5 HP Honda® GXV160, 7/8 inch square type connection. For use with the General PSD, and Ground Hog CSD, SD and PSD Series earth augers only. | *$1,591.95 |
 | General 671 DIG-R-TACH, SERIES 16: 1330 ft lbs drilling torque @ 2500 PSI hydraulic
Brand: General Equipment Part Number: M671-16
671 DIG-R-TACH, SERIES 16, base drive unit. Used most often with skid steer loaders. Single speed roller chain reduction, high torque geroler type hydraulic motor. Two inch hexagon drive shaft connection, 1330 ft lbs drilling torque @ 2500 PSI hydraulic system pressure, stub length connecting hoses. Less hydraulic quick couplers, hose kit, auger and mounting bracket/frame to power source. For use with 6710 Series earth augers and 6700 Series auger extensions. | *$1,591.95 |
 | General 300 Series Hole Diggers: 5 HP Honda GXV140 engine. 190 ft lbs drilling torque
Brand: General Equipment Part Number: M330H
M330H Professional Series Hole Digger, equipped with 5 HP Honda GXV140 engine. Base unit, two man operation. Powered by an industrial quality four cycle engine, automatic centrifugal clutch directly connected by engine speed, approximately 190 ft lbs drilling torque, 1-3/8 inch hexagon drive shaft connection. Less auger. For use with the 4400 Series augers and 5500 Series auger extensions only. | *$1,591.95 |
| | General 753 DIG-R-TACH, SERIES 24: 2018 ft lbs drilling torque @ 2500 PSI hydraulic
Brand: General Equipment Part Number: M753-24
753 DIG-R-TACH, SERIES 24, base drive unit. Used most often with tractor loader backhoes. Single speed roller chain reduction, high torque geroler type hydraulic motor with integral dual cross over relief valve to minimize internal damage from excessive pressure spikes. 2-9/16 inch round drive shaft connection, 2018 ft lbs drilling torque @ 2500 PSI hydraulic system pressure, stub length connecting hoses. Less hydraulic quick couplers, hose kit, auger and mounting bracket/frame to power source. For use with 6750 Series earth augers and 6780 Series auger extensions. | *$1,990.95 |
| | General 200 Series Hole Diggers: OD-4" Cutting Dia: 5. 2" Digging Depth: 30"
Brand: General Equipment Part Number: 2135-4E
200 Series Hole Diggers: Augers-4" Cutting Dia: 5. 2" Digging Depth: 30" | *$102.95 |
| | General 200 Series Hole Diggers: OD-6" Cutting Dia: 7. 5" Digging Depth: 30"
Brand: General Equipment Part Number: 2135-6E
200 Series Hole Diggers: Augers-6" Cutting Dia: 7. 5" Digging Depth: 30" | *$107.95 |
| | General 200 Series Hole Diggers: OD-8" Cutting Dia: 9. 2" Digging Depth: 30"
Brand: General Equipment Part Number: 2135-8E
200 Series Hole Diggers: Augers-8" Cutting Dia: 9. 2" Digging Depth: 30" | *$112.95 |
| | General 300 Series Hole Diggers: OD: 4". Cutting Dia; NA Digging Depth: 3'
Brand: General Equipment Part Number: 5500-4X3
300 Series Hole Diggers: OD: 4". Cutting Dia; NA Digging Depth: 3' | *$161.95 |
| | General 300 Series Hole Diggers: OD: 8". Cutting Dia; NA Digging Depth: 3'
Brand: General Equipment Part Number: 5500-8X3
300 Series Hole Diggers: OD: 8". Cutting Dia; NA Digging Depth: 3' | *$171.00 |
| | General 300 Series Hole Diggers: OD: 4". Cutting Dia; 4. 5" Digging Depth: 3'
Brand: General Equipment Part Number: 4400-4E3
300 Series Hole Diggers: OD: 4". Cutting Dia; 4. 5" Digging Depth: 3' | *$190.00 |
| | General BT360 Series (Stihl Type) Augers: OD: 4". Cutting Dia; 4. 5" Digging Depth: 2. 5'
Brand: General Equipment Part Number: BT360-4E
BT360 Series (Stihl Type) Augers: OD: 4". Cutting Dia; 4. 5" Digging Depth: 2. 5' | *$190.00 |
| | General PSD Series (Ground Hog Type) Augers: OD: 4". Cutting Dia; 4. 5" Digging Depth: 3'
Brand: General Equipment Part Number: PSD4
PSD Series (Ground Hog Type) Augers: OD: 4". Cutting Dia; 4. 5" Digging Depth: 3' | *$190.00 |
| | General 300 Series Hole Diggers: OD: 12". Cutting Dia; NA Digging Depth: 3'
Brand: General Equipment Part Number: 5500-12X3
300 Series Hole Diggers: OD: 12". Cutting Dia; NA Digging Depth: 3' | *$199.95 |
| General 671 DIG-R-TACH, SERIES 24: 2018 ft lbs drilling torque @ 2500 PSI hydraulic
Brand: General Equipment Part Number: M671-24
671 DIG-R-TACH, SERIES 24, base drive unit. Used most often with tractor loader backhoes. Single speed roller chain reduction, high torque geroler type hydraulic motor with integral dual cross over relief valve to minimize internal damage from excessive pressure spikes. Two inch hexagon drive shaft connection, 2018 ft lbs drilling torque @ 2500 PSI hydraulic system pressure, stub length connecting hoses. Less hydraulic quick couplers, hose kit, auger and mounting bracket/frame to power source. For use with 6710 Series earth augers and 6700 Series auger extensions. | *$2,137.95 |
| | General 300 Series Hole Diggers: OD: 6". Cutting Dia; 7. 5" Digging Depth: 3'
Brand: General Equipment Part Number: 4400-6E3
300 Series Hole Diggers: OD: 6". Cutting Dia; 7. 5" Digging Depth: 3' | *$204.95 |
| | General PSD Series (Ground Hog Type) Augers: OD: 8". Cutting Dia; 9. 5" Digging Depth: 3'
Brand: General Equipment Part Number: PSD8
PSD Series (Ground Hog Type) Augers: OD: 8". Cutting Dia; 9. 5" Digging Depth: 3' | *$218.95 |
| | General BT360 Series (Stihl Type) Augers: OD: 8". Cutting Dia; 9. 5" Digging Depth: 2. 5'
Brand: General Equipment Part Number: BT360-8E
BT360 Series (Stihl Type) Augers: OD: 8". Cutting Dia; 9. 5" Digging Depth: 2. 5' | *$218.95 |
| | General 300 Series Hole Diggers: OD: 8". Cutting Dia; 7. 5" Digging Depth: 3'
Brand: General Equipment Part Number: 4400-8E3
300 Series Hole Diggers: OD: 8". Cutting Dia; 7. 5" Digging Depth: 3' | *$218.95 |
| | General 300 Series Hole Diggers: OD: 12". Cutting Dia; 13. 6" Digging Depth: 3'
Brand: General Equipment Part Number: 4400-12E3
300 Series Hole Diggers: OD: 12". Cutting Dia; 13. 6" Digging Depth: 3' | *$242.95 |
| | General Dual speed chain reduction drive system for M671-16 and M753-16.
Brand: General Equipment Part Number: 671-800
Optional dual speed chain reduction drive system for M671-16 and M753-16. | *$266.00 |
| | General DIG-R-TACH: OD: 6". Cutting Dia: NA. Digging Depth: 4'
Brand: General Equipment Part Number: 6700-6X4
DIG-R-TACH: OD: 6". Cutting Dia: NA. Digging Depth: 4' | *$323.00 |
| | General DIG-R-TACH: OD: 6". Cutting Dia: 7 1/2". Digging Depth: 4'
Brand: General Equipment Part Number: 6710-6PE4
DIG-R-TACH: OD: 6". Cutting Dia: 7 1/2". Digging Depth: 4' | *$475.00 |
| | General BT360 Series (Stihl Type) Augers: OD: 16". Cutting Dia; 17. 5" Digging Depth: 2. 5'
Brand: General Equipment Part Number: BT360-16E
BT360 Series (Stihl Type) Augers: OD: 16". Cutting Dia; 17. 5" Digging Depth: 2. 5' | *$498.95 |
